Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Maybe mine did... let's see what happens after I've used the saw to down the tree in my back yard.
Jokes aside, saw and file (did I say file?) seem shortish...
-
I just want to make everyone aware
that when they are testing the cutters
On the pliers that they are only <u>Soft Cutters </u>
As you can see in the pic
So personally I wouldn’t try to cut fencing etc..

-
Yeah, W, I saw that on the box yesterday when my PAD arrived. Its a bummer when you ding up your cutters, especially when they can't be replaced. In my view, any MT cutters "should" be able to take down hard wire (nail, fence), but that is not always the case.
The PowerLock has a hard wire cutter: https://www.sogknives.com/powerlock.html
-
Is brass rod (under 3mm/ 1/8” ) considered “hard”?
-
I agree you should be able to cut a nail or a fence etc
But I don’t want to try it as it would not be covered under warranty
And this is my first SOG so don’t know how good they are
-
I have left Chris@SOG a email
So hopefully I will get a reply
-
@Don Pablo said:
I believe things like that disappear the first time you use the saw?
I see them to a lesser extent with unused SAK saws.Yup - they did
(had to help a little at the very tip by way of judicious application of an X-Acto blade).Saw works OK but it's short. I think it could have been made a bit longer, there is about 9 or 10 mm spare space in the handle. Makes one wonder...
-
Since I have several SOG MTs, and am not worried about destroying this one, I used the PAD to cut a "10d" or "10 penny" cement-coated general carpentry/framing nail. I had to apply a lot of pressure, so much that it hurt my hand and I had to glove up, but it cut the nail with no problem. The compound leverage pivot surely helped in this regard, and I consider it the best feature on any SOG MT. I used the "hard wire" portion of the cutter, closest to the pivot, though SOG does not call it that. No damage to the "soft wire cutter", and no deformation or loosening of the cutter/head/pivot. [Edit: see below; the PAD does have a hard wire cutter.]
A 10d nail is 9 gauge and 0.148" or 3.76 mm at the shank.
Why cement coated? "Friction heat from driving the nail softens the cement coating and causes the nail to adhere to wood more firmly." https://www.westlakehardware.com/frequently-asked-questions/what-is-the-advantage-of-cement-coated-nails/
So I say it passed this test. My dynamic rating of the PowerAccess Deluxe went from 4/10 to 5/10.



-
Nice one powernoodle

I thought you had damage to the pliers :ahhh
But checked my PAD and it has the same cut out near the pivot
Never noticed that before, I take it that’s the hard wire cutter
-
On the website, it shows that the PowerAccess Deluxe has a soft and a hard wire cutter. Scroll down to the specs table. So it looks like the box just doesn't set out all of the specifications.
-
Excellent find powernoodle

This is from the SOG website
TOOL COUNT: 21
1 1/4" Driver
2 Awl
3 Blade (Fully Serrated)
4 Blade (Straight Edge)
5 Bottle Opener
6 Can Opener
7 Chisel
8 File (3-Sided)
9 Flat Screwdriver (Medium)
10 Flat Screwdriver (Small)
11 Gripper
12 Hex Bit Driver (1/4")
13 Hex Bit Kit
14 Jewelry Driver
15 Needle Nose Pliers
16 Phillips Screwdriver
17 Protractor
18 Ruler
19 Wire Cutter (Hard)
20 Wire Cutter (Soft)
21 Wood Saw
-
The box also shows a wire crimper (see #18 in post 86), that is not shown on the website. Intrigue!
-
@powernoodle said:
The box also shows a wire crimper (see #18 in post 86), that is not shown on the website. Intrigue!Excellent

Check out the pic to see what we are talking about
I don’t know what to say ???
I just can’t work out why they did that

-
PE blade on a4 was mediocre. Not as sharp as their dedicated knives. I suspected it wouldn't be very good from just feeling the edge.
SE blade did exactly what I expected. Tore the paper most of the time.Disassembled a typewrite for repair work and used the jeweler's driver to remove key set screws. No issue there.
Nice to see the cutters work correctly. I am hesitant to cut nails with MT cutters. Galvanized bailing wire is usually the the hardest thing I cut with MT cutters.
Thank you for doing that, PN. :)


-
The PE Blade is really sharp on my PAD
I can even shave hairs off my forearm
-
Day 1
I was able to cut post-it note paper with the PE blade on my Poweraccess, but it required light-medium sawing motion and sometimes ripped the paper. I should probably sharpen it.
-
I stropped mine on leather and it helped a bit. Maybe it is similar to the saw issue DT had, where excess metal exists from the machining process. I should have checked under magnification first, but maybe you can Pablo? Just to see if there is a burr on the apex.
-
At least that issue I have not found on my PE blade even under mag. There may be differences in QC...
Meanwhile we're on
**Day 2 **
... where the PAD sees itself detailed to light gardening duties

But first, a beauty shot. The roses are doing really well this sprummer.
Next are various stray branches succumbing to the forceful action of the wire cutter and saw, respectively. The former's compund leverage made short work of the admittedly thin branch, and it can easily accommodate slightly thicker branches (up to wire cutter blade width, I guess). For thicker branches the latter does a good job, but sawable thickness is a tad limited due to its shortness. I suspect SOG have decided to forgo lengthening the PA saw just for the PAD, but unless Chris chimes in, I guess this will remain speculation.




Sent on my SM-G930F with Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login