Skinth Loadout Thread!
-
Does anyone know if both LM bit kit cards will fit in the M-Shield front pocket with a Wave in the main pocket? Seriously considering a Skinth, but the L-Shield looks too bulky.
Umm no, just no.
I was the same as you until I got a L Shield.
I wear it every single day and while it is a little wide it is thin enough that I dont even know it is there.
Honestly the best knife multi tool purchase I have ever made.
Makes carrying a MT, flashlight and pen an effortless proposition.
Both bit kit cards will fit in the front pocket of the L-Shield?
Don't have any bit cards so I can't answer your question.
I was just replying about you saying the L Shield is bulky.
In no way is it bulky.
Best tool pouch I have ever owned.
-
So I have a L Skinth that has been carried daily for a year or two. Love it.
Thoight for sure someone said and or posted a picture of a L Skinth with a Wave and two LM Bit Cards in the main pocket.
Just picked up a BO Wave + to use in the Harley's MTO Rotation Challenge in July and they will not all fit in my Skinth. Well to be completely honest they will fit very snug but the flap will not snap closed.
Am I wrong to think some folks made that combination fit or maybe mine is a bit small from the Metro "factory"?
-
That load won’t fit in my L Shield, either.
Sent from my iPhone using Tapatalk
-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
-
@HarleyXJGuy said:
Thoight for sure someone said and or posted a picture of a L Skinth with a Wave and two LM Bit Cards in the main pocket.Just picked up a BO Wave + to use in the Harley's MTO Rotation Challenge in July and they will not all fit in my Skinth. Well to be completely honest they will fit very snug but the flap will not snap closed.
Am I wrong to think some folks made that combination fit or maybe mine is a bit small from the Metro "factory"?
I've seen this picture as well. I hope they both fit because I just ordered an L Shield last week!
-
Don't keep your hopes up...
Just one takes ALOT of effort in mine. -
@Mechanickal said:
Don't keep your hopes up...
Just one takes ALOT of effort in mine.That's disappointing. I hope at least one bit card fits, their website claims one will.
-
Don't keep your hopes up...
Just one takes ALOT of effort in mine.That's disappointing. I hope at least one bit card fits, their website claims one will.
Have not tried to put the bit card in the pocket. I carry a Wave and a single bit card in the main pouch with the Wave. Carry a Space Pen and Modded AAA light in the tubes.
-
@ezdog said:
I have an XL Shield and that is the smallest to make that work I think?Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
I would send Eric an email anyway and see if there are any left.
I lost my EDC Skinth a few years back and the same story,it had been dropped but there were still a few in stock too!Of course getting the replacement is what caused me to find the lost one too!

-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
Dropped? It still shows up when I look for it: http://skinthsolutions.com/product/xl-shield-sheath/ ...
-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
Dropped? It still shows up when I look for it: http://skinthsolutions.com/product/xl-shield-sheath/ ...
It was for almost a week.
It is back though and I have one on the way. Well ordered at least.
The wait begins, again.
-
@HarleyXJGuy said:
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
As long at the one bit kit fits, I'm happy. Nice looking sheath BTW. Ordered mine at the end of may and the wait is already brutal. I can't stop looking at pictures of Skinths!
-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
As long at the one bit kit fits, I'm happy. Nice looking sheath BTW. Ordered mine at the end of may and the wait is already brutal. I can't stop looking at pictures of Skinths!
Been carrying it everyday for maybe three years both while I was in the Army and now as a flatbed truck driver. Just now starting to show sines small signs of wear.
Couple of threads hanging out that I should really get around to cutting off and burning.
-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
As long at the one bit kit fits, I'm happy. Nice looking sheath BTW. Ordered mine at the end of may and the wait is already brutal. I can't stop looking at pictures of Skinths!
Been carrying it everyday for maybe three years both while I was in the Army and now as a flatbed truck driver. Just now starting to show sines small signs of wear.
Couple of threads hanging out that I should really get around to cutting off and burning.
That's good to hear, the OEM leather sheath I have got worn out pretty fast.
-
@HarleyXJGuy said:
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Both bit cards will fit in my L shield. The trick is how you load it. One bit card behind the Wave with the flat side against the tool. Second bit card in front of the tool in the main compartment upside down with the flat side against the tool. Any other way and the bit cards stick up higher and take up more room. I think if you cut one bit card shorter by getting rid of the little handle at the top it might fit in the front pocket. I used a sharpie cap just for demonstration purposes.



-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Both bit cards will fit in my L shield. The trick is how you load it. One bit card behind the Wave with the flat side against the tool. Second bit card in front of the tool in the main compartment upside down with the flat side against the tool. Any other way and the bit cards stick up higher and take up more room. I think if you cut one bit card shorter by getting rid of the little handle at the top it might fit in the front pocket. I used a sharpie cap just for demonstration purposes.
Good to know, thanks. Was that fabric custom order? It looks awesome.
-
Not sure, I won it in a GAW last year.
-
Been carrying my new BO Wave and one bit card for the last few days and I dont care for how tight everything is.
Cant imagine with both cards how it would be.
Glad I ordered a XL. Plus any excuse to buy a Surge right?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

