Skinth Loadout Thread!
-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
I would send Eric an email anyway and see if there are any left.
I lost my EDC Skinth a few years back and the same story,it had been dropped but there were still a few in stock too!Of course getting the replacement is what caused me to find the lost one too!

-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
Dropped? It still shows up when I look for it: http://skinthsolutions.com/product/xl-shield-sheath/ ...
-
I have an XL Shield and that is the smallest to make that work I think?
Works for me at least but with a Spirit X instead if Leatherman
Sent from my iPhone using Tapatalk
XL Shield has been dropped from the store I guess.
Shame because I was very close to buying one and the Mondo is for longer tools like the Surge which I don't own.
Dropped? It still shows up when I look for it: http://skinthsolutions.com/product/xl-shield-sheath/ ...
It was for almost a week.
It is back though and I have one on the way. Well ordered at least.
The wait begins, again.
-
@HarleyXJGuy said:
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
As long at the one bit kit fits, I'm happy. Nice looking sheath BTW. Ordered mine at the end of may and the wait is already brutal. I can't stop looking at pictures of Skinths!
-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
As long at the one bit kit fits, I'm happy. Nice looking sheath BTW. Ordered mine at the end of may and the wait is already brutal. I can't stop looking at pictures of Skinths!
Been carrying it everyday for maybe three years both while I was in the Army and now as a flatbed truck driver. Just now starting to show sines small signs of wear.
Couple of threads hanging out that I should really get around to cutting off and burning.
-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
As long at the one bit kit fits, I'm happy. Nice looking sheath BTW. Ordered mine at the end of may and the wait is already brutal. I can't stop looking at pictures of Skinths!
Been carrying it everyday for maybe three years both while I was in the Army and now as a flatbed truck driver. Just now starting to show sines small signs of wear.
Couple of threads hanging out that I should really get around to cutting off and burning.
That's good to hear, the OEM leather sheath I have got worn out pretty fast.
-
@HarleyXJGuy said:
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Both bit cards will fit in my L shield. The trick is how you load it. One bit card behind the Wave with the flat side against the tool. Second bit card in front of the tool in the main compartment upside down with the flat side against the tool. Any other way and the bit cards stick up higher and take up more room. I think if you cut one bit card shorter by getting rid of the little handle at the top it might fit in the front pocket. I used a sharpie cap just for demonstration purposes.



-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Both bit cards will fit in my L shield. The trick is how you load it. One bit card behind the Wave with the flat side against the tool. Second bit card in front of the tool in the main compartment upside down with the flat side against the tool. Any other way and the bit cards stick up higher and take up more room. I think if you cut one bit card shorter by getting rid of the little handle at the top it might fit in the front pocket. I used a sharpie cap just for demonstration purposes.
Good to know, thanks. Was that fabric custom order? It looks awesome.
-
Not sure, I won it in a GAW last year.
-
Been carrying my new BO Wave and one bit card for the last few days and I dont care for how tight everything is.
Cant imagine with both cards how it would be.
Glad I ordered a XL. Plus any excuse to buy a Surge right?
-
Ahhh, the
way :D -
After only 12 business days, I got the email that my L Shield has shipped! So stoked to get it!
-
After only 12 business days, I got the email that my L Shield has shipped! So stoked to get it!
12 days?! That has to be a new record.
Can’t wait to see it what did you get?
A black L Shield with brass snaps.
-
After only 12 business days, I got the email that my L Shield has shipped! So stoked to get it!
12 days?! That has to be a new record.
Can’t wait to see it what did you get?
A black L Shield with brass snaps.
Nice!
Just ordered a XL Shield the same way.
-
After only 12 business days, I got the email that my L Shield has shipped! So stoked to get it!
12 days?! That has to be a new record.
Can’t wait to see it what did you get?
A black L Shield with brass snaps.
Nice!
Just ordered a XL Shield the same way.
That's awesome! Can't wait to see it loaded up.
-
[quote author=b_martin link=topic=50263.msg1713410#msg1713410 date=1529013437]
After only 12 business days, I got the email that my L Shield has shipped! So stoked to get it!12 days?! That has to be a new record.
Can’t wait to see it what did you get?
A black L Shield with brass snaps.
Nice!
Just ordered a XL Shield the same way.
That's awesome! Can't wait to see it loaded up.
[/quote]it's an XL, it'll take some time :D
-
My L Shield arrived in the mail today, and man this thing is nice! I'm super impressed and it's definitely worth the money.



-
Tried out this loadout today in an XL Shield: SOG PAD, bit kit, light, bit extender and pen. Just about fits but the flap closes with some difficulty. Might have to order the MUT version...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


