Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
@Dutch_Tooler said:
Day 7PAD's compound leverage pliers to the rescue intervening in a repair following a typical office accident involving destruction of a sprung badge holder reel. The repairs involved putting my preferred black leather badge holder on a new reel - I hate these clunky plastic badge holders

Edit: glad you could join us Nix


PS for some reason the pic is invisible...??? Although I am pointing to a file uploaded with Tapatalk.
Could see the pic earlier today, so something has happened [emoji53]
Sent fra min FRD-L09 via Tapatalk
-
Day 7
PAD's compound leverage pliers to the rescue intervening in a repair following a typical office accident involving destruction of a sprung badge holder reel. The repairs involved putting my preferred black leather badge holder on a new reel - I hate these clunky plastic badge holders

Edit: glad you could join us Nix


PS for some reason the pic is invisible...??? Although I am pointing to a file uploaded with Tapatalk.
Could see the pic earlier today, so something has happened [emoji53]
Sent fra min FRD-L09 via Tapatalk
Seems to be happening to more members today

-
-
Here are some pics of the file from my PAD
Well a bit of scratched metal
you can’t call it a file
That looks like a movie prop. Not a real file, but it could fool viewers.
It’s absolutely unacceptable

-
Good luck with the challenge again guys... how are you liking your SOGs so far?
D_T, for some reason, Tapatalk is smurfing all the pics uploaded... I’m having the same problem too... might want to re-upload via your mobile browser...
-
Thanks jaya

The SOG PAD is doing ok so far
It’s just the file, it’s a bit of a joke
:ahhh
I won’t say it’s a good or bad tool
Until the challenge is finished
As there are a lot more tasks to complete
-
Not easy to find on my phone after the resizing, but here's my missing Day 7 picture.

-
Awesome... I can see it now...

-
@Dutch_Tooler said:
Not easy to find on my phone after the resizing, but here's my missing Day 7 picture.Good you got it sorted D_T

Weird that the pic disappeared
I saw the pic this morning
It happened to some other members as well ???
-
Thank you, jaya_man!

I am enjoying mine. It performs similarly to most SOGs I have used, aside from the file issue, and the implements being outside accessible. I was weary of the whispy blades to begin with, but the blades have not broken yet while using them as I would any other MT blade. My final judgement on the PAD will be reserved for the end of the challenge though. :)
-
I think I see the issue.
I use chrome, as I assume many others do, and the tapatalk image is on https link, but chrome says it's an unsafe domain, so when I open the image link in a new tab ie:
https://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpgsays insecure and I see no photo
http://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpghowever loads the image. Next month Chrome will start reporting all regular http links as insecure so I hope crapolatalk get whatever certificate they need sorted done.
-
Day 7:
Tried out the 1/4" socket driver/hex bit adapter today. The 1/4" part fits a bit loosely, but that might be helpful if you need to drive a screw where you cannot be straight-on with the handles.
Anyway. It works as advertised and I like is a lot more than the bit grabber in the plier casting.
-
@Whoey said:
I think I see the issue.I use chrome, as I assume many others do, and the tapatalk image is on https link, but chrome says it's an unsafe domain, so when I open the image link in a new tab ie:
https://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpgsays insecure and I see no photo
http://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpghowever loads the image. Next month Chrome will start reporting all regular http links as insecure so I hope crapolatalk get whatever certificate they need sorted done.
Thanks for looking Whoey

Just one thing: I wasn't using Chrome, instead it happened in Firefox. Same problem probably...
Anyway, found where my pic resizer stores its output so I'll happily avoid using Tapatalk from now on ;)
-
Day 02:
I like having some scissors handy, so this will likely be my usual carry for the challenge:

I was outside doing some yard work today, already the Classic's scissors proved to be useful in clipping a couple of damaged flowers and some string. But on to the PAD.......
Used the main blade to open some bags of mulch and a bag of birdseed. Also used the knife to cut some twine used to lash a couple of supports together. For these tasks the knife was sharp and effective.


I was refilling the bird-feeder and noticed that there was residual dirt and seed stuck to the bottom of the feeder. I decided to use the file as a scraper to clean out this mess (after all, there was a reduced chance of scraping the metal housing by using the file.). The file worked well in this application, and the lock kept the file from folding up when engaged in vigorous scraping/cleaning.

All in all, a good day for the PAD.
-
Day 8
Today I used the integral bit holder and flathead screw bit
To undo the shower plug hole cover for cleaning
I really like the integral bit holder especially the magnet
That holds the bits and I didn’t need to grip it hard
All works as you would expect no problems



-
Day 8
Needed a piece of an old belt (material is analogous to that of a seat belt). Serrated blade made short work (pardon the pun :D)...


-
Nice shots and uses today, guys!

Day 03:
Used the X-small driver to tighten up my reading glasses. Worked well.

-
Powernoodle Day . . . uh, never mind.
After turning into Mr. Grumpy because of the PAD's "file" and general cheapy feel (IMO) - and then joyfully returning it to Amazon - I looked at MT alternatives in the PAD's general price range. Just for giggles. On eBay you can get a new Swisstool for $86.16 shipped, which is $16.21 more than the PAD on Amazon Prime. Well worth the extra cost. The PAD gives you the bit drivers (eh), 1/4" driver and compound leverage pivot not found on the Swisstool, but the Swisstool is in virtually all other respects much the superior MT. Again, IMO. The PAD and Swisstool are pretty much at the opposite end of the spectrum when looking at quality, precision, etc. Or if you want to stick with SOG, the PowerLock can be had on Amazon Prime for $47.77 shipped, which is $22.18 less than the PAD. The venerable PowerLock gives you the same (and awesome) compound leverage and 1/4" driver of the PAD, albeit with inside opening tools. It does have those goofy wings that slow deployment of the tools, but the PowerLock is a legit competitor at $47. Someone, maybe Nix, noted that the PAD's sheath just does not work well with the driver set, which competes for space against the MT. Another inelegant design element.
So whether competing internally with the PowerLock, or going up against the class leaders like the Swisstool, one is hard-pressed in my view to advocate the PAD. This is especially true when embracing the sad reality that SOG obviously does not care if all of the tools on the PAD function as advertised. So Mr. Grumpy here is more saddened by SOG the company than the PAD itself. Its not the poor PAD's fault that it cannot keep up with the other kids.
-
@powernoodle said:
So Mr. Grumpy here is more saddened by SOG the company than the PAD itself.I share those sentiments. I want to love SOG, but they make it hard. I've had girlfriends like that......but not for long.
And, yes, I'm bummed out by the poorly designed sheath. Another sign of poor project development and oversight. I think somebody needs to be fired.
Today the naked PAD is riding in the back pocket of my jeans. This is actually my new favorite carry method for the PAD.....which is a bit sad in it's own right...... Maybe I'll try to make a leather sheath for it.
Hmmmm......
-
Day 8:
Getting used to the quirkiness of the PAD. Now that is has been performing every task I have used it for, without issue, I cannot say it feels cheap anymore("not as nicely/well made as others" would be more applicable).
A few positive note:
The half-ground drivers of the PAD perform slightly better than the high-polished drivers on some other MTs. The tools are easy to deploy(not requiring fingernails) and the cutter section on the pliers is superb(size and design). The plier head itself has proven to be as good as some older SOG plier heads.
The sheath isn't great, but it has worked as advertised. For me it has anyway.If the SOG had included a proper file on the PAD, I believe overall opinion would differ to some large degree.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login