Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
I'm glad to get this challenge underway!

-
Howdy Nix! Awesome to have you in the challenge!

Day 6:
Two pics. One is me pulling a small-medium brass nail out of painted oak. Two is my using the integrated hex driver in the back of the pliers. I didn't like the plier-hex idea on the PowerPlay and still don't like it on the PowerAccess Deluxe. But, figured I give it a go for the challenge. Works, but constant squeezing is required. :ahhh

-
Day 01 (continued):
Used the saw to cut down a small Aspen tree. This past Winter was tough and the deer ate anything they could. We had a small Aspen tree growing in the yard, but it had been mauled too badly to leave standing. Had to go.
PAD saw made quick work of cutting the soft wood, and the "tree" was felled in no time. Roots got dug up with a shovel.

-
Day 7
PAD's compound leverage pliers to the rescue intervening in a repair following a typical office accident involving destruction of a sprung badge holder reel. The repairs involved putting my preferred black leather badge holder on a new reel - I hate these clunky plastic badge holders

Edit: glad you could join us Nix


PS for some reason the pic is invisible...??? Although I am pointing to a file uploaded with Tapatalk.
-
Day 7
Today I tested the Plain blade
I have some different size silicone reinforced hoses
And a piece of garden hose to useI was surprised how easy the blade cut the silicone hoses
But when I tried the garden hose it wasn’t that easy
I had to put a lot of pressure and saw motions to cut the hoseI will test the blade on more things to see if it is still sharp
Tried to shave hair off my arm like I tried before and worked
But this time the blade couldn’t shave the hair off my arm
So it’s not as sharp now as it was first use


-
@Dutch_Tooler said:
Day 7PAD's compound leverage pliers to the rescue intervening in a repair following a typical office accident involving destruction of a sprung badge holder reel. The repairs involved putting my preferred black leather badge holder on a new reel - I hate these clunky plastic badge holders

Edit: glad you could join us Nix


PS for some reason the pic is invisible...??? Although I am pointing to a file uploaded with Tapatalk.
Could see the pic earlier today, so something has happened [emoji53]
Sent fra min FRD-L09 via Tapatalk
-
Day 7
PAD's compound leverage pliers to the rescue intervening in a repair following a typical office accident involving destruction of a sprung badge holder reel. The repairs involved putting my preferred black leather badge holder on a new reel - I hate these clunky plastic badge holders

Edit: glad you could join us Nix


PS for some reason the pic is invisible...??? Although I am pointing to a file uploaded with Tapatalk.
Could see the pic earlier today, so something has happened [emoji53]
Sent fra min FRD-L09 via Tapatalk
Seems to be happening to more members today

-
-
Here are some pics of the file from my PAD
Well a bit of scratched metal
you can’t call it a file
That looks like a movie prop. Not a real file, but it could fool viewers.
It’s absolutely unacceptable

-
Good luck with the challenge again guys... how are you liking your SOGs so far?
D_T, for some reason, Tapatalk is smurfing all the pics uploaded... I’m having the same problem too... might want to re-upload via your mobile browser...
-
Thanks jaya

The SOG PAD is doing ok so far
It’s just the file, it’s a bit of a joke
:ahhh
I won’t say it’s a good or bad tool
Until the challenge is finished
As there are a lot more tasks to complete
-
Not easy to find on my phone after the resizing, but here's my missing Day 7 picture.

-
Awesome... I can see it now...

-
@Dutch_Tooler said:
Not easy to find on my phone after the resizing, but here's my missing Day 7 picture.Good you got it sorted D_T

Weird that the pic disappeared
I saw the pic this morning
It happened to some other members as well ???
-
Thank you, jaya_man!

I am enjoying mine. It performs similarly to most SOGs I have used, aside from the file issue, and the implements being outside accessible. I was weary of the whispy blades to begin with, but the blades have not broken yet while using them as I would any other MT blade. My final judgement on the PAD will be reserved for the end of the challenge though. :)
-
I think I see the issue.
I use chrome, as I assume many others do, and the tapatalk image is on https link, but chrome says it's an unsafe domain, so when I open the image link in a new tab ie:
https://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpgsays insecure and I see no photo
http://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpghowever loads the image. Next month Chrome will start reporting all regular http links as insecure so I hope crapolatalk get whatever certificate they need sorted done.
-
Day 7:
Tried out the 1/4" socket driver/hex bit adapter today. The 1/4" part fits a bit loosely, but that might be helpful if you need to drive a screw where you cannot be straight-on with the handles.
Anyway. It works as advertised and I like is a lot more than the bit grabber in the plier casting.
-
@Whoey said:
I think I see the issue.I use chrome, as I assume many others do, and the tapatalk image is on https link, but chrome says it's an unsafe domain, so when I open the image link in a new tab ie:
https://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpgsays insecure and I see no photo
http://uploads.tapatalk-cdn.com/20180607/8c25b2419aaaa540b308afd4ca79383b.jpghowever loads the image. Next month Chrome will start reporting all regular http links as insecure so I hope crapolatalk get whatever certificate they need sorted done.
Thanks for looking Whoey

Just one thing: I wasn't using Chrome, instead it happened in Firefox. Same problem probably...
Anyway, found where my pic resizer stores its output so I'll happily avoid using Tapatalk from now on ;)
-
Day 02:
I like having some scissors handy, so this will likely be my usual carry for the challenge:

I was outside doing some yard work today, already the Classic's scissors proved to be useful in clipping a couple of damaged flowers and some string. But on to the PAD.......
Used the main blade to open some bags of mulch and a bag of birdseed. Also used the knife to cut some twine used to lash a couple of supports together. For these tasks the knife was sharp and effective.


I was refilling the bird-feeder and noticed that there was residual dirt and seed stuck to the bottom of the feeder. I decided to use the file as a scraper to clean out this mess (after all, there was a reduced chance of scraping the metal housing by using the file.). The file worked well in this application, and the lock kept the file from folding up when engaged in vigorous scraping/cleaning.

All in all, a good day for the PAD.
-
Day 8
Today I used the integral bit holder and flathead screw bit
To undo the shower plug hole cover for cleaning
I really like the integral bit holder especially the magnet
That holds the bits and I didn’t need to grip it hard
All works as you would expect no problems



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login