Powerlock 30-day challenge
-
Good luck Nix and I hope you like your new
Powerlock when you have done the challenge

-
Day 01:
I'll cover the tool set I've got on this Powerlock first thing today:

Pliers with wire cutters. Nice needle nose design with fine tips. Tips meet precisely. Obviously this model has SOG's compound leverage.
Crimper integrated into the plier head on the handle side of the pivot points. I don't typically use a crimper, but, you never know.....Handle 1 tools:
Half-serrated knife blade: Blade seems a bit thin, but is sharp. I'd prefer a plain edge blade, but I think this is fine for a multitool.
Scissors: The design of these scissors is a bit bulky, but they might still be useful....except there is significant laxity in the pivot point. This may be another case of interesting design, porr execution.
Cap-lifter with medium flat driver (5mm): Looks well made and like it will do well.
1/4" Driver: This is one of the more interesting and, for me, exciting options in the Powerlock. It is a bit odd that there is a half-stop (90º) on this 'blade'. When the driver is deployed at the 90º angle, the handle cover cannot be closed and, since it opens inward, the handles can't be closed. This isn't a problem per se, but it does highlight one small disadvantage of inward opening tools.Handle 2 tools:
Saw: Again, the saw is a wee bit shorter than it really needs to be. It's cutting length is about the same as a Vic Farmer's saw.
File: The file seems pretty good, but you guys know I'll be testing this!
Can opener with small flat driver: This seems fairly well designed and made. I expect it to work well.
Reamer/awl: more of a spike. It'll be interesting to see how this performs.
Philips driver: nice length, crisp edges, long shank. Looks like it will be a performer.
Flat driver: about 7mm, gives another nice option. Looks to be strong enough for light prying. -
Day 01 (continued):
Photo of cover interfering with 1/4" driver at half-stop:

Might be possible to use the 1/4" driver in some limited ways at the half stop leaving everything open:

-
Day 01 (continued):
Task one: open a bag of dog food for the household fiend. The bag in question is made of plastic and is easily cut with our Fiskars kitchen scissors. Could the Powerlock's scissors handle this task?

Fortunately the Powerlock comes equipped with a sharp knife.....

-
That is a shame the scissors failed

-
Yes.
I had hoped........ :-[
-
Day 01 (continued):
As W noted, it was a bit disappointing that the scissors didn't work out. More than a little disappointing, I really wanted some functional scissors. So, a bit more testing.......
I tried cutting string.....no luck. The looseness of the pivot point just allows the string to fold over.
So, more testing with 15# and 30# mono filament fishing line. The 15# test line folded over. The 30# was a bit stiffer and the scissors mostly mangled the line without cutting, but after about 10 attempts and a some really quick action on the scissors, I cut the line once.

Paper had equally dismal results. I could not cut newspaper or an envelope. Some card stock could be clipped, but I could not cut out a small square from the corner. Once the card stock became weakened from earlier cuts, the material just folded and wouldn't be cut.

So, the scissors, one of the big draws of this model, are miserable and functionally useless.
I may try to peen the pivot point and see if I can tighten them up.
-
That’s what I would do peen the pivot
Make sure to test after each peen
-
Day 01 (continued):
I find manipulating the tool covers on the handles a bit awkward. I think I'll get used to this feature, but it does slow me down. And the tool sets clump when any one blade is opened. Managing the clumped tools with the cover open, but still sort of in the way seems cumbersome.
I'm not sure how this happened, but I was trying to open the 1/4" and got a big clump of tools out. In trying to sweep the 1/4" fully open, I ended up nicking my finger of the serrated blade.
Goods news: the serrated blade is sharp.
More good news: I didn't cut myself badly.
Bad news: Mrs Nix became cross with me for getting blood everywhere. Small nick, but it sure did bleed!
Photo (wee bit graphic for blood and not terribly interesting, but still, it's a challenge and these things need to be documented):
Spoiler:

I'll have to be more aware in the future!
-
**Day 01 **(continued):
@Nix said:
Now....what to use to peen the pivot?
Dull nail? Metal punch?
I think my peening hammer would be too cumbersome. But....it couldn't hurt.....

In answer of my own question, I used both a peening hammer and a metal punch to peen the pivot. This seemed to help...a lot. It might need a bit more peening, but I'll test it a bit as it is now.

-
Nice one Nix

-
Nice thoughts so far, Nix! The PowerLock is a quirky thing, but you may end up liking it once you have learned the ins & outs of it. It is a 20yo design that hasn't changed much. :ahhh
Interesting that the one they sent you has scissors. Or by chance, none of my PLs have scissors. Mine mostly have the V-Cutter or two separate blades(one pe and one se on the older models). My PowerGrab has the same scissors and they only work well if you are right handed(naturally pushing the handle where the blades meet). I thought about peening them, but the Grab is a collection piece, so it would be pointless. But, seeing as you'll be using the PL a lot, peening may be the easiest option.
-
For sure, G-man. I'm a user, so peening seemed like the right move. I may peen the pivot a bit more, but so far, my initial job seems to have been effective.
But, hey, this is only Day 1 of the challenge for me!

-
Day 01 (yes, this is still Day 1):
Mrs Nix got a new washer and dryer today. A number of tasks needed to be accomplished along the way.
First, I removed a vinyl stop that prevented the glass doors from opening fully (sorry for the poor focus), Philips driver worked well.


Then, the dryer vent needed to be removed.
I used the 1/4" drive with a bit extender to reach back and loosen the hose clamp:


Tried to use the pliers to loosen the hot & cold water supplies for the washer, but the space was just too confined. In the end I used some slip joint pliers to loosen the hoses up. This is no hit on the Powerlock, just a realistic limitation due to a large 'nut' in a confined space.


Yes, that is the raggedy band-aid from the earlier cut seen in the top of the frame. Time to replace that band-aid........
-
Day 02:
Used the scissors to snip some mint for a cucumber salad for lunch.
The recent peening seems to have the scissors running better.


-
Nice one Nix glad they work better

-
Thanks, W.
So far, so good....... :)
-
Day 02 (continued):
Tied a few flies this afternoon. Scissors seemed to work just fine here and I'm encouraged to try them on the river.


And the cap-lifter seems to be in full-working order:

I haven't give it the full "Dutch Tooler Test", but the challenge is still young...........
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

