Powerlock 30-day challenge
-
That is a shame the scissors failed

-
Yes.
I had hoped........ :-[
-
Day 01 (continued):
As W noted, it was a bit disappointing that the scissors didn't work out. More than a little disappointing, I really wanted some functional scissors. So, a bit more testing.......
I tried cutting string.....no luck. The looseness of the pivot point just allows the string to fold over.
So, more testing with 15# and 30# mono filament fishing line. The 15# test line folded over. The 30# was a bit stiffer and the scissors mostly mangled the line without cutting, but after about 10 attempts and a some really quick action on the scissors, I cut the line once.

Paper had equally dismal results. I could not cut newspaper or an envelope. Some card stock could be clipped, but I could not cut out a small square from the corner. Once the card stock became weakened from earlier cuts, the material just folded and wouldn't be cut.

So, the scissors, one of the big draws of this model, are miserable and functionally useless.
I may try to peen the pivot point and see if I can tighten them up.
-
That’s what I would do peen the pivot
Make sure to test after each peen
-
Day 01 (continued):
I find manipulating the tool covers on the handles a bit awkward. I think I'll get used to this feature, but it does slow me down. And the tool sets clump when any one blade is opened. Managing the clumped tools with the cover open, but still sort of in the way seems cumbersome.
I'm not sure how this happened, but I was trying to open the 1/4" and got a big clump of tools out. In trying to sweep the 1/4" fully open, I ended up nicking my finger of the serrated blade.
Goods news: the serrated blade is sharp.
More good news: I didn't cut myself badly.
Bad news: Mrs Nix became cross with me for getting blood everywhere. Small nick, but it sure did bleed!
Photo (wee bit graphic for blood and not terribly interesting, but still, it's a challenge and these things need to be documented):
Spoiler:

I'll have to be more aware in the future!
-
**Day 01 **(continued):
@Nix said:
Now....what to use to peen the pivot?
Dull nail? Metal punch?
I think my peening hammer would be too cumbersome. But....it couldn't hurt.....

In answer of my own question, I used both a peening hammer and a metal punch to peen the pivot. This seemed to help...a lot. It might need a bit more peening, but I'll test it a bit as it is now.

-
Nice one Nix

-
Nice thoughts so far, Nix! The PowerLock is a quirky thing, but you may end up liking it once you have learned the ins & outs of it. It is a 20yo design that hasn't changed much. :ahhh
Interesting that the one they sent you has scissors. Or by chance, none of my PLs have scissors. Mine mostly have the V-Cutter or two separate blades(one pe and one se on the older models). My PowerGrab has the same scissors and they only work well if you are right handed(naturally pushing the handle where the blades meet). I thought about peening them, but the Grab is a collection piece, so it would be pointless. But, seeing as you'll be using the PL a lot, peening may be the easiest option.
-
For sure, G-man. I'm a user, so peening seemed like the right move. I may peen the pivot a bit more, but so far, my initial job seems to have been effective.
But, hey, this is only Day 1 of the challenge for me!

-
Day 01 (yes, this is still Day 1):
Mrs Nix got a new washer and dryer today. A number of tasks needed to be accomplished along the way.
First, I removed a vinyl stop that prevented the glass doors from opening fully (sorry for the poor focus), Philips driver worked well.


Then, the dryer vent needed to be removed.
I used the 1/4" drive with a bit extender to reach back and loosen the hose clamp:


Tried to use the pliers to loosen the hot & cold water supplies for the washer, but the space was just too confined. In the end I used some slip joint pliers to loosen the hoses up. This is no hit on the Powerlock, just a realistic limitation due to a large 'nut' in a confined space.


Yes, that is the raggedy band-aid from the earlier cut seen in the top of the frame. Time to replace that band-aid........
-
Day 02:
Used the scissors to snip some mint for a cucumber salad for lunch.
The recent peening seems to have the scissors running better.


-
Nice one Nix glad they work better

-
Thanks, W.
So far, so good....... :)
-
Day 02 (continued):
Tied a few flies this afternoon. Scissors seemed to work just fine here and I'm encouraged to try them on the river.


And the cap-lifter seems to be in full-working order:

I haven't give it the full "Dutch Tooler Test", but the challenge is still young...........
-
Day 02 (continued):
Two days, two blood lettings.
This time I was trying to use the Powerlock's wirecutter to snip a thick zip-tie that was in an awkward and confined spot. I struggled to get the jaws around the zip-tie, using my off hand to get the material in position. When I had my chance, I gave the Powerlock a good squeeze. Sure enough, the wire cutters snipped the zip-tie, but the jaws slammed shut and the ring finger of mind off hand got snapped by the sharp, precise tips of the pliers.
Wire cutters did well, and I should have been more careful with my hand position. (In my defense, this was in a tricky spot with limited ability to maneuver.) Maybe this qualifies for a Mr Pinchy badge?


-
Ouch Nix! Looks like the PL has a vendetta against you.

Seriously. It looks as if he PL is working out quite well, as far as working as-advertised, so far.
No Pinchy badge though. :D That particular badge is one you really don't want. A Gerber multi-plier linear palm bleed is one of the worst MT injuries. :ahhh
-
Doing well Nix

-
@gerleatherberman said:
Ouch Nix! Looks like the PL has a vendetta against you.
the PADs from Powernoodle and Nix met the Powerlock at the SOG Headquarters :o and explained the horror stories, bad looks and impolite comments about them made by their previous owners :ahhh, so the SOG family
had to play it's counterattack to such actions sending their bigger, meaner brother :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

