Powerlock 30-day challenge
-
Ouch Nix! Looks like the PL has a vendetta against you.

Seriously. It looks as if he PL is working out quite well, as far as working as-advertised, so far.
No Pinchy badge though. :D That particular badge is one you really don't want. A Gerber multi-plier linear palm bleed is one of the worst MT injuries. :ahhh
-
Doing well Nix

-
@gerleatherberman said:
Ouch Nix! Looks like the PL has a vendetta against you.
the PADs from Powernoodle and Nix met the Powerlock at the SOG Headquarters :o and explained the horror stories, bad looks and impolite comments about them made by their previous owners :ahhh, so the SOG family
had to play it's counterattack to such actions sending their bigger, meaner brother :D -
The SOG scissors are not awesome.. I have pretty much concluded that the only scissors I will ever use on an MT or SAK are those made by Victorinox. So every day I have with me at least the teeny scissors on a Manager or the larger ones on the Explorer, or both - irrespective of what MT I might be carrying. In my experience, no other maker comes close to Victorinox scissors.
Its pretty lame, honestly, that the scissors on a new PowerLock would not cut anything. What's going on at SOG? Really - how can they keep shipping things that don't work?
I do otherwise appreciate the PowerLock - minus the scissors - though the tool covers or "wings" are not a very elegant design. As I said in the PowerAccess Deluxe Challenge, the SOG's compound leverage pliers are the "best" in the business, albeit with no replaceable cutters. The PowerLock's blades and drivers perform admirably and pretty much on par with the other top brands. I do like how smoothly the PowerLock opens, and I like the polished finish.
So overall, I like the PowerLock and PowerAssist except for the scissors, and they are MTs that a "working man" could rely on every day. I do, though, still consider SOG to be a "second tier" maker, which has a lot of improvement to undergo before competing with Victorinox and Leatherman. At $49 shipped on Amazon Prime, the PowerLock is budget priced and you get a solid MT for the money.


-
@Nix said:
Tried to use the pliers to loosen the hot & cold water supplies for the washer, but the space was just too confined. In the end I used some slip joint pliers to loosen the hoses up. This is no hit on the Powerlock, just a realistic limitation due to a large 'nut' in a confined space.You could always give it a nose job on a bench grinder, but then you give up the needle nose functionality.

-
Now that's usin' yer Noodle!
Nice snaps. 
I do kinda like the reach one gets with needle nose pliers. And I don't have any gripes with the SOG pliers at this point. I'll continue to point out situations (as come up) where the needle nose either is better for the job or isn't. The whole reason we have a diversity of knives, pliers, and drivers, is that each has it's virtue....and limitation. No one multitool is going to be perfect for every situation.
I'm not a working man....unless working at being lazy is a job...and I tend to look for multitools that will be good companions for EDC, fishing, camping, hunting, etc..... For my life, needle nose makes a bit more sense. I think.
But I've never carried a blunt nose multitool, so I'm certainly open to changing my mind. I do have a birthday coming up......... ;)
-
Day 03:
Got out for a short hike this morning while it's still cool. With the Spring rains we've had, everything is now looking nice and green. There are still a few patches of snow up in the high spots......


No uses for the Powerlock on the hike today, but it rode nicely in the sheath.

-
Day 03 (continued):
Mrs Nix got a box today and wanted me to open it. I reached for the chisel/wire stripper.....and then realized that tool is on the Victorinox Spirit.

So, I pulled out the spike and used that to tear open the packaging. Not elegant, but it worked.


-
Day 04:
Making Broccoli Soup for dinner this evening. SOG Powerlock's blade got pressed into kitchen duty.
About to get the El Peacent treatment:

Mayhem completed:

The Powerlock worked well here. The blade is sharp and slices well. This task did highlight a disadvantage of having an internally folding knife blade (as opposed to outside opening knife): since the knife faces inward, the second handle prevents the blade from making full-length contact with a cutting board, except when working off the very edge. To make many of these cuts, I had to use a drawing or pulling cut with the tip of the knife. Not a big deal, but definitely not as agile as a regular paring knife.
-
Day 04 (continued):
I'm taking a Dutch_Tooler approach to Cap Lifter testing......

-
In a pinch, I have used inboard toolset blades with the pliers deployed and handles open to facilitate flush surface cutting. The PL is not terrible that way. But, to be honest, I don't like MT blades in general (inboard or outboard). It is like a knife with brick handle. :ahhh
-
'zactly.But it works.
With SOG's compound leverage, it's a bit tougher to use the inboard knife with the pliers opened, but that too is doable.

-
But it works.
With SOG's compound leverage, it's a bit tougher to use the inboard knife with the pliers opened, but that too is doable.

I *have *poked myself more than once trying to use a SOG implement with the handles extended like I do with the Spirit and Leathermans

The Blacktip's long and slender plier jaws are like deadly spears waiting to stab you!! :ahhh -
Nice work Nix

-
Thanks, W.

-
Day 05:
I got the chance to head up into the hills to do a little fishing today.......

Really nice day and not too hot. I headed for a stream where I've been successful before. I knew the water would be high and feared it would be muddy from all the recent rain, but it looked pretty good:

While I remembered the Powerlock, I forgot to bring the insect repellent. This would prove to be a major oversight......

Because I anticipated high water and muddy conditions, I decided to bring a spinning rod. This was not the best choice. While I got a few nice casts in and hoped for a result.....I got skunked.
Part of my failure was due to poor gear selection, but part was also due to an active and continual running battle with a horde of mosquitoes. I tried to cover up, but they exploited any opening. When they decide to try crawling up my nose, I made a tactical withdrawal and tried to make it back to the truck.
On my way, I ran into a barbed wire entanglement, clearly designed to entrap the unwary fisherman, leaving said poor soul to the merciless mosquitoes.

I have to say the Powerlock was impressive in cutting the wire fairly easily. I don't think I've had another multitool cut double-stranded barbed wire as easily as the Powerlock.

Once cleared of the barbed wire, I made my way back to the truck and headed home. Bruised, bloodied, and humiliated, but now with a new bottle of DEET.

-
That sounds like a terrible fishing excursion! I hope your next fishing trip goes better. :ahhh
At least the PL didn't let you down when you needed it. :-\
-
Any day fishing is a good day.

But, yeah, next time, mosquito repellent.

-
it seems that you went fishing but the mosquitoes ended up fishing you! :ahhh
SOGs C.Leverage and wire cutters are really good, the main attractive if SOG tools IMO.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
