Powerlock 30-day challenge
-
Day 04:
Making Broccoli Soup for dinner this evening. SOG Powerlock's blade got pressed into kitchen duty.
About to get the El Peacent treatment:

Mayhem completed:

The Powerlock worked well here. The blade is sharp and slices well. This task did highlight a disadvantage of having an internally folding knife blade (as opposed to outside opening knife): since the knife faces inward, the second handle prevents the blade from making full-length contact with a cutting board, except when working off the very edge. To make many of these cuts, I had to use a drawing or pulling cut with the tip of the knife. Not a big deal, but definitely not as agile as a regular paring knife.
-
Day 04 (continued):
I'm taking a Dutch_Tooler approach to Cap Lifter testing......

-
In a pinch, I have used inboard toolset blades with the pliers deployed and handles open to facilitate flush surface cutting. The PL is not terrible that way. But, to be honest, I don't like MT blades in general (inboard or outboard). It is like a knife with brick handle. :ahhh
-
'zactly.But it works.
With SOG's compound leverage, it's a bit tougher to use the inboard knife with the pliers opened, but that too is doable.

-
But it works.
With SOG's compound leverage, it's a bit tougher to use the inboard knife with the pliers opened, but that too is doable.

I *have *poked myself more than once trying to use a SOG implement with the handles extended like I do with the Spirit and Leathermans

The Blacktip's long and slender plier jaws are like deadly spears waiting to stab you!! :ahhh -
Nice work Nix

-
Thanks, W.

-
Day 05:
I got the chance to head up into the hills to do a little fishing today.......

Really nice day and not too hot. I headed for a stream where I've been successful before. I knew the water would be high and feared it would be muddy from all the recent rain, but it looked pretty good:

While I remembered the Powerlock, I forgot to bring the insect repellent. This would prove to be a major oversight......

Because I anticipated high water and muddy conditions, I decided to bring a spinning rod. This was not the best choice. While I got a few nice casts in and hoped for a result.....I got skunked.
Part of my failure was due to poor gear selection, but part was also due to an active and continual running battle with a horde of mosquitoes. I tried to cover up, but they exploited any opening. When they decide to try crawling up my nose, I made a tactical withdrawal and tried to make it back to the truck.
On my way, I ran into a barbed wire entanglement, clearly designed to entrap the unwary fisherman, leaving said poor soul to the merciless mosquitoes.

I have to say the Powerlock was impressive in cutting the wire fairly easily. I don't think I've had another multitool cut double-stranded barbed wire as easily as the Powerlock.

Once cleared of the barbed wire, I made my way back to the truck and headed home. Bruised, bloodied, and humiliated, but now with a new bottle of DEET.

-
That sounds like a terrible fishing excursion! I hope your next fishing trip goes better. :ahhh
At least the PL didn't let you down when you needed it. :-\
-
Any day fishing is a good day.

But, yeah, next time, mosquito repellent.

-
it seems that you went fishing but the mosquitoes ended up fishing you! :ahhh
SOGs C.Leverage and wire cutters are really good, the main attractive if SOG tools IMO.
-
I'd agree with that--all that--at that moment...... :D
-
Great you could cut that barbed wire Nix

-
Thanks, W.
I really like this test for a multitool's cutters. Separates the posers from the performers.
-
Great question! Thanks for the reminder.

I guess I didn't post up a pic of that test. But, YES!
These snips cut 44#, 30#, 15#, 10#, and.....slender 3# mono-filament fishing line.
I figured that the bigger stuff would not be an issue. I doubted the 3# would be cut, as it is soooooo fine and flexible. But the snips cut that quite nicely, too.
So far, the Powerlock's wire cutters have been excellent.

-
Nice one Nix

So far so good than :D
-
Day 06:
No uses today (so far). Powerlock has been riding around on my belt in it's sheath, Vic Classic in my pocket (no uses for that today either). So far I like this sheath fairly well.


-
Whenever I see a PowerLock or Assist, I ask myself "why does SOG bother making stuff like the PAD, if it is going to have to compete with the superior PL?"

-
I hear ya.
The PAD is packed with features and tools. That's nice. And the compound mechanism of the PAD is more elegant than the Powerlock's shrouded approach. That's nice, too.
In my case, if the quality of the PAD was up at the Powerlock level, I think the PAD might be the superior tool, but right now, I like the Powerlock much better for it's fit, feel, and function (yeah, I did have some issues with the scissors, but a bit of peening seems to have improved those.).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
