Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
The store didn't have the capped sodas I went for, but I did put another hole in an old work belt (from my heavier days) with the awl. It worked fairly well.


-
@gerleatherberman said:
To keep my sanity, I have convinced myself, it is a gravity flap sheath.

The moderately good news is, it seems that the velcro was added to the sheath in the last assembly step. People with a sewing machine and a supply of good quality sew-on velcro should have little trouble implementing an improved closure. As to the last, anyone know of a reliable online source? Because the rest of the sheath suits my needs...
-
@gerleatherberman said:
The store didn't have the capped sodas I went for, but I did put another hole in an old work belt (from my heavier days) with the awl. It worked fairly well.that belt looks strong, it will surely hold a lot of load

-
A job well done GLBM

-
To keep my sanity, I have convinced myself, it is a gravity flap sheath.


The moderately good news is, it seems that the velcro was added to the sheath in the last assembly step. People with a sewing machine and a supply of good quality sew-on velcro should have little trouble implementing an improved closure. As to the last, anyone know of a reliable online source? Because the rest of the sheath suits my needs...
3M makes a good stick-on velcro that can easily sewed on. My observations have led me to think the hook side on the PAD sheath has hooks that are too small. The loop side sticks to my maglite sheath hook side quite well.

The store didn't have the capped sodas I went for, but I did put another hole in an old work belt (from my heavier days) with the awl. It worked fairly well.
that belt looks strong, it will surely hold a lot of load

indeed, it is good for imitating Batman's belt. :DThank you, sir!

-
I wish that the popper that’s on
the back of the pouch was on the flap
I don’t like the popper on the back
I found that the popper undone
itself 4 times when sitting down
Throughout the challenge :ahhh :ahhh

-
Day 29
Today I opened the last 2 bottles from
the 4 pack I especially bought for this challengeAs my daughter has just finished her exams
We aloud her to have one of the bottles
And the missus had the other one :DAgain no problems using the cap lifter





-
Day 29
Today, a pic of how I avoid that the snap button on the back opens when you sit down ;)
Notice how the loop flap sits under the lower transversal webbing and is thus less subject to being lifted off.

-
Excellent D_T I will give that a try

-
Glad to be of help

-
I did the same as D_T and never had a problem with the snap coming undone.

But I still don't like that sheath.
-
The popper on the back of the
pouch worked well today with D_Ts tip
But I still would like to see a popper
on the flap I Don’t like Velcro on a pouch
But even with a popper on the flap
it’s still a rubbish pouch and doesn’t work
The bit set is in the wrong place
and that stops the flap to sit straight
-
Agreed.

-
Wspeed, Nix, have you tried putting both the tool and the bit holder in the main pocket? Tight fit, but no rattle.
-
@Dutch_Tooler said:
Wspeed, Nix, have you tried putting both the tool and the bit holder in the main pocket? Tight fit, but no rattle.I have but didn’t like it

-
I didn't try that. I'm surprised to hear there is enough space to do that. Had I kept the PAD, I would have made my own sheath for it, probably with a single pocket for both PAD and bit set.
-
Post 1/2 for challenge checklist completion.
Bought a pack of diet Coke in the glass bottles for the cap lifter test. The cap lifter worked flawlessly. No issue with that, but then again, that is a hard tool to mess up.




-
Post 2/2 for challenge checklist completion.
The measurement markers are pretty lame, but so are markings on most MTs(although Vic, LM and Gerber have more legible markings in general). Never a reliable measuring device. This is the first time I have used an MT to measure something. :ahhh
The blade cut the paper from the inside perfectly, but I had to use a saw motion to start the cut from the edge of the paper. After the initial sawing, the cut was fine. Seems about like it did when I started the challenge.Checklist completed.

Thank you again, Nix! The checklist made this one of the (if not THE) most comprehensive challenges on MT.o.

I will write an in-depth assessment as soon as I can to cover the toolset, feel, impressions, comparisons, and thoughts.

One more challenge day tomorrow. PAD is ready. :)



-
Day 30
<u>Challenge completion post</u>This marks my completion of the 30-day Power Access Deluxe challenge. I'll be rating the various tools at points/10 below.
As visible from the narrower of the pics below, the PE blade still cuts as well as it did when new - a small blade-lengthwise movement on the edge of the sheet was enough to start the cut, with occasional like movements being necessary to proceed, without actual sawing being needed; no tears. Truth to tell, I have not used the PE blade excessively, but I did various cuts on rope and whittling on a wood stick, and I have not once touched up the blade. It is a tad slim (due to constructional details of the PAD - I'll come to that) but at least it uses the space available to it when folded to the fullest extent. I'll give it 8 points.
The SE blade, likewise, appears as sharp as ever. What I wrote above on the space usage of the PE blade applies here as well. 8 points.
The saw blade works quite well for its length. The saw teeth are still not noticeably duller than in the beginning - to the contrary, the finishing imperfections I noticed earlier (small residual barbs of thin metal about some of the planes on the teeth when unused) have disappeared after a few cuts, and any cutting impairment one might have imagined to be caused by them have as well. However (and this applies to the file as well) it could easily have been made at least 9mm longer and still fold into its space in the handle - one point demerit. 7 points.
The file. Volumes have been written about this. This combines the dubious distinctions of being by far the worst implement on the PAD and the worst file I personally have ever encountered on any multitool I have handled so far. While it works (through side effects of an imperfect cutting, no doubt) the grooves are ridiculously shallow and do not result in actual teeth being formed between them. Despite all this however, it does take off some metal when applied, at a fraction of the rate any other file achieves - although this appears to be the result of chance rather than design. 1 point.
The cap lifter and medium screwdriver work more or less as advertised, although some demerits are due for the rounded-off screwdriver blade edges, making purchase iffy on slotted-head screws (offset by slightly better usability on Phillips), the restricted reach due to the shape of the remainder of the tool and the slightly awkward hook angle on the cap lifter, resulting in some caps' edges not being caught immediately. 8 points.
The can opener and small screwdriver: the latter is OK apart from the same problems as the medium one; the can opener works, albeit at a slower rate than some other multitool can openers I know. There is a strange mismatch between the design, which appears to be made for left-handed clockwise opening motion, and its location, which kind of makes that impossible due to the bulk of tools and handle being in the way. The edge, though, is reasonably usable and could be sharpened if needed. The rating applies to mine - I hear there is a huge quality spread on the PADs out there. 6 points.
The jeweler's screwdriver is actually quite good: sharp edges on the blade help purchase and the long shaft adds reach. One demerit for a minor bend in the shaft. Still, 9 points.
The Phillips has a good head, allowing very small screws to be turned as well as larger ones, on a strangely awkwardly formed shaft. Beats me why it was formed this way, as it is necessary neither for its function nor for reaching the other tools, and severely limits reach e.g. on recessed screws. 7 points.
The large screwdriver / prying tool is pretty sturdy, but its one almost beveled edge makes purchase on slotted screws awkward, and as a prying tool one would have expected a notch. I have not ground it down to a chisel - that would probably work OK, I am guessing. 7 points.
The awl works as advertised, and its edge is easy to sharpen if one is so inclined. 8 points.
The best part of this tool apart from the compound leverage pliers are the multiple possibilities of using either the accompanying bit set or all generic 1/4" bits or extensions. This is very practical per se - the PAD adds to this two ways of using these, one as part of the back ends of the pliers (magnet helps keeping bits in place - the one downside is that one has to keep applying pressure to apply torque) and one dedicated stub as one of the handle tools, with as a bonus a 90° detent slot for added torque leverage if needed. 9 points.
Then the pliers. I have never previously owned a SOG and I really like the pliers. Compound leverage makes for doubled gripping strength at the cost of more handle splay and more space needed in the tool for the pliers at the cost of space available to the remaining tools, especially the longer ones (the blades spring to mind, pun intentional). On my PAD the alignment is perfect, wobble non-existent and the cutters (even if not replaceable) do their job as advertised and show no sign of dulling as yet. 9 points.
The sheath is moderately well designed, I find. Tool and bit set fit in the main pocket and I use the side loop for a light. This double usage of the main pocket adds some out-of-plane bulk but prevents the tool from moving around too much, which would be the case were it the sole resident. The execution, however, is mediocre (sloppy stitching) to poor (horrible velcro quality). Compared to e.g. a Leatherman Cordura Molle sheath with Velcro closure, it is beyond the pale. 3 points.
Overall design, look and feel: initial misgivings regarding the thin tool lock bar springs, as formed by making cutouts in the handle sides, did not turn into problems. The springs still work well and have not broken off. Lock continues to be positive even under adverse strain. One spring was slightly bent out of plane, without impairing the function. The matte metal finish reportedly is not to everyone's taste, but I, for one, don't mind, as it gives a reasonably slip-free grip and is adapted to covert operations for lack of reflection, without becoming entirely invisible if dropped in the underbrush, as a BO tool would. The overall design of the handles and tools is OK and space-saving, keeping in mind the notes applying to the various tools expressed above. The file, though, causes the overall rating to go down sharply. With a good file I'd have given the PAD an 8/10 overall, now it is a 7/10. I am not counting the sheath in this one.
Plans for improvements: I would be untrue to my screen name if I didn't have any ;)
The file: I have a spare ST 300 file lying around which I think can be converted. This would take care of the biggest gripe I have with the PAD.
Sharpening the can opener and awl edges should be easy and bring some benefits.
I might apply a pry bar notch.
I think I'll remove the velcro from the sheath and replace it, either with a better quality velcro, or with snap buttons like on Skinths.Hope you all enjoyed this writeup, and especially the entire challenge - I surely have, also thanks to the detailed instructions. Many thanks to the initiators



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login