Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
To keep my sanity, I have convinced myself, it is a gravity flap sheath.

-
The store didn't have the capped sodas I went for, but I did put another hole in an old work belt (from my heavier days) with the awl. It worked fairly well.


-
@gerleatherberman said:
To keep my sanity, I have convinced myself, it is a gravity flap sheath.

The moderately good news is, it seems that the velcro was added to the sheath in the last assembly step. People with a sewing machine and a supply of good quality sew-on velcro should have little trouble implementing an improved closure. As to the last, anyone know of a reliable online source? Because the rest of the sheath suits my needs...
-
@gerleatherberman said:
The store didn't have the capped sodas I went for, but I did put another hole in an old work belt (from my heavier days) with the awl. It worked fairly well.that belt looks strong, it will surely hold a lot of load

-
A job well done GLBM

-
To keep my sanity, I have convinced myself, it is a gravity flap sheath.


The moderately good news is, it seems that the velcro was added to the sheath in the last assembly step. People with a sewing machine and a supply of good quality sew-on velcro should have little trouble implementing an improved closure. As to the last, anyone know of a reliable online source? Because the rest of the sheath suits my needs...
3M makes a good stick-on velcro that can easily sewed on. My observations have led me to think the hook side on the PAD sheath has hooks that are too small. The loop side sticks to my maglite sheath hook side quite well.

The store didn't have the capped sodas I went for, but I did put another hole in an old work belt (from my heavier days) with the awl. It worked fairly well.
that belt looks strong, it will surely hold a lot of load

indeed, it is good for imitating Batman's belt. :DThank you, sir!

-
I wish that the popper that’s on
the back of the pouch was on the flap
I don’t like the popper on the back
I found that the popper undone
itself 4 times when sitting down
Throughout the challenge :ahhh :ahhh

-
Day 29
Today I opened the last 2 bottles from
the 4 pack I especially bought for this challengeAs my daughter has just finished her exams
We aloud her to have one of the bottles
And the missus had the other one :DAgain no problems using the cap lifter





-
Day 29
Today, a pic of how I avoid that the snap button on the back opens when you sit down ;)
Notice how the loop flap sits under the lower transversal webbing and is thus less subject to being lifted off.

-
Excellent D_T I will give that a try

-
Glad to be of help

-
I did the same as D_T and never had a problem with the snap coming undone.

But I still don't like that sheath.
-
The popper on the back of the
pouch worked well today with D_Ts tip
But I still would like to see a popper
on the flap I Don’t like Velcro on a pouch
But even with a popper on the flap
it’s still a rubbish pouch and doesn’t work
The bit set is in the wrong place
and that stops the flap to sit straight
-
Agreed.

-
Wspeed, Nix, have you tried putting both the tool and the bit holder in the main pocket? Tight fit, but no rattle.
-
@Dutch_Tooler said:
Wspeed, Nix, have you tried putting both the tool and the bit holder in the main pocket? Tight fit, but no rattle.I have but didn’t like it

-
I didn't try that. I'm surprised to hear there is enough space to do that. Had I kept the PAD, I would have made my own sheath for it, probably with a single pocket for both PAD and bit set.
-
Post 1/2 for challenge checklist completion.
Bought a pack of diet Coke in the glass bottles for the cap lifter test. The cap lifter worked flawlessly. No issue with that, but then again, that is a hard tool to mess up.




-
Post 2/2 for challenge checklist completion.
The measurement markers are pretty lame, but so are markings on most MTs(although Vic, LM and Gerber have more legible markings in general). Never a reliable measuring device. This is the first time I have used an MT to measure something. :ahhh
The blade cut the paper from the inside perfectly, but I had to use a saw motion to start the cut from the edge of the paper. After the initial sawing, the cut was fine. Seems about like it did when I started the challenge.Checklist completed.

Thank you again, Nix! The checklist made this one of the (if not THE) most comprehensive challenges on MT.o.

I will write an in-depth assessment as soon as I can to cover the toolset, feel, impressions, comparisons, and thoughts.

One more challenge day tomorrow. PAD is ready. :)



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login