Roxon Storm S801 Multi-tool Review
-
Thanks! So pleased it all worked out. :D
Fix your can opener Roxon!
Let's look at the corkscrew next. It's very low profile, but only because there is room for it in its big handle.
Compared to the Juice CS4, Victorinox SwissChamp, and Wenger Swiss Sportsman.

-
@ReamerPunch said:
Thanks! So pleased it all worked out. :D
Fix your can opener Roxon!
Let's look at the corkscrew next. It's very low profile, but only because there is room for it in its big handle.
Compared to the Juice CS4, Victorinox SwissChamp, and Wenger Swiss Sportsman.

great! One of my pet peeves with the Juice series was the annoying Corkscrew
that hung up on clothes
-
Awesome review, thoughts, and testing RP! I may need to acquire on of them at some point.

-

Also a fan of the almost universal bit adapter.


-
:o :o :o


-
A few more points regarding the scissors, compared to the Outu.
The scissors have been redesigned. At first glance, they are identical, but looking closer, things start coming to the surface.
-The tips have been rounded off. And as mentioned in the review, they do not close past each other.
-The part behind the main pivot has changed shape.
-The secondary handle pivot has changed configuration.
-The sharpening is precise.
-The performance has improved. Outu took three cuts to get through jeans seam, Storm took only one.
-The finish is not mirror polished anymore.
-The Outu's open a bit wider.


-
Your making this tool sound better and better RP
I really like those bigger scissors :ahhh and those other models from them look very nice as well :o 
-
@ReamerPunch said:
A few more points regarding the scissors, compared to the Outu.
The scissors have been redesigned. At first glance, they are identical, but looking closer, things start coming to the surface.
-The tips have been rounded off. And as mentioned in the review, they do not close past each other.
-The part behind the main pivot has changed shape.
-The secondary handle pivot has changed configuration.
-The sharpening is precise.
-The performance has improved. Outu took three cuts to get through jeans seam, Storm took only one.
-The finish is not mirror polished anymore.
-The Outu's open a bit wider.


good that they added an adjustable pivot
and solved the overlapping tips issue 
It seems that even though they ignored some key problems in the tool (can opener... ???) they addressed other points and realised how to improve on their olde designs
-
@ThePeacent said:
good that they added an adjustable pivot
and solved the overlapping tips issue 
It seems that even though they ignored some key problems in the tool (can opener... ???) they addressed other points and realised how to improve on their olde designs
All three monster scissors have a screw in the pivot.
I do not know who designed those scissors, but I'd shake their hand. And to find that model with just knife and scissors... Can't wait to get hold of a few of those.
-
I will keep an eye out for these tools, but I don't like their logo. It looks like some dodgy person in a hoodie, is it Assassin's Creed I'm thinking of?

-
So close, yet so far apart...
The wire-cutters look like LM ones, but the shape is a bit different. The LM wire-cutters do not bite into the bolt gripping part, and are slightly larger overall.
With LM wire-cutters in there, the Storm pliers cannot close all the way.


-
When I first saw this multi-tool, the hook disgorger was called a nail puller.
Though officially changed in the Roxon website, some sellers still have it as "nail puller."By the time I got it, the implement was renamed. Admittedly, not a lot of people actively look for a hook disgorger on their multi-tool.
I assume it was changed because it was not as good a nail puller as they had hoped.
The nail-pulling notch is not beveled, the tips are not ground to an edge, you can barely called it angled, and it is quite short and thin. Also one end is pivoting around a screw post, so not exactly the strongest set-up.Of course, despite the name change, it can still be useful as a pry tool, for staples, paint cans, plastic boxes or packaging, split rings, small chain links, or any other light duty tasks that could possibly damage the blade tip. Maybe even pulling small nails out of soft wood, who knows.
It could have also been a wide flathead, and still be used as a pry thingy, or maybe there could be a chisel edge, or a reamer-punch, a clam-shell package opener, or anything that could fit there.In any case, it can stay, as a pry thingy, a staple remover, a small nail puller, or hopefully a hook disgorger, just for the heck of it.

-
If you have a corkscrew, you might as well find some use for it, right?
When a jar lid is too tight, you can pry it from the side to break the airtight seal.
The corkscrew tip was at the perfect angle, and thin enough to fit under the lid, and fssst!

-
@ReamerPunch said:
If you have a corkscrew, you might as well find some use for it, right?
When a jar lid is too tight, you can pry it from the side to break the airtight seal.
The corkscrew tip was at the perfect angle, and thin enough to fit under the lid, and fssst!

there's no "3 cm" mark in the ruler? ??? ???
-
@ThePeacent said:
there's no "3 cm" mark in the ruler? ??? ???No, there is a pin there for the scissors backsprings.
-
there's no "3 cm" mark in the ruler? ??? ???
No, there is a pin there for the scissors backsprings.
I like that the markings are over a black background,
on some Leatherman and Gerber it's darn hard to see the numbers :ahhh -
Can opener at the top, cord cutter at the bottom. After I swapped their positions.
The can opener was at the bottom position, now it is at the top. This slight relocation made it from unusable to functional.

-
This kitchen scale is 8mm thick, and can hold up to 150kg. I put it in a plastic bag, and what do you know. The glass breaker shattered it.
Until I get to break a car door window, this test is a placeholder of sorts. I cannot say this is the best option for vehicle rescue. This kitchen scale was thick, and made to hold the weight of a person, and it shattered quite convincingly. Would a car window yield the same result? Maybe, but do not take my word for it.




-
that's a great test!
I've done it myself to test one of my glass breakers too
Re: car windows, they are less resistant than this scale and a good hit (especially on the corners/aways from the center) is sure to break them and shatter the glass to bits

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
