Any Jeepers out there?
-
I agree with you- something is indeed lost when you have to qualify it like that.
And yes, you are absolutely right that the wind dams and other bits are too close to the ground- in fact I see so many of those torn off because of winter that I have to wonder why they even exist.

But then there's the flip side- my Jeep is terrible to drive. The JKU is worlds better than the TJ, but the suspension is still stiff and hitting bumps at highway speeds causes it to flutter a bit and crosswinds blow it all over. Most folks don't want to deal with those kinds of issues, especially when the full transfer case (versus an AWD system) just adds weight and buggers up fuel economy. Most people don't even know the difference between 4WD and AWD and think they are just different names for the same thing.
Def
-
@Grant Lamontagne said:
I agree with you- something is indeed lost when you have to qualify it like that.And yes, you are absolutely right that the wind dams and other bits are too close to the ground- in fact I see so many of those torn off because of winter that I have to wonder why they even exist.

But then there's the flip side- my Jeep is terrible to drive. The JKU is worlds better than the TJ, but the suspension is still stiff and hitting bumps at highway speeds causes it to flutter a bit and crosswinds blow it all over. Most folks don't want to deal with those kinds of issues, especially when the full transfer case (versus an AWD system) just adds weight and buggers up fuel economy. Most people don't even know the difference between 4WD and AWD and think they are just different names for the same thing.
Def
Sad but true. People no longer seem to want manual transmissions, nor do they want manual transaxles. Like you said earlier, they want the truck to drive like a sports car.
When I drove cars (' 87 Honda Crx, '94 Honda Accord, '06 Honda Civic Si) they were mostly standard shift. Even my first pickup truck was standard. Moving to the big Blazers of the '90's, it was difficult to find one in standard shift, but at least I had the 4x4 shifter.
The '99 Grand Cherokee I will be in does have a 4x4 shifter for the Selec-Trac, thank God for that, but I think the new ones are some sort of dial.
-
I hate the dials for more reasons than I can say....
Def

-
I'm officially a Jeeper again. Re-registered the old Grand Cherokee I had before I had the Thundah Blazer.
Tomorrow I will check in with the local auto glass folks, because a 2×4 was pushed exhuberantly from the hatch until someone heard a little bit of glass.
Shocks and springs are tired. Since I'm replacing them anyway, this is an opportunity to get taller springs and shocks and do the 2" lift. That seems to be a respectable lift without having to changet out every other peice of hardware under the Jeep. Stopped at Advance Auto Parts today. They have the 2" lift shocks, but the fronts only. So I will have to order some. Same with the springs.
Rancho? Rough Country 2 and a half? Fat Bob? What does all the WJ crowd suggest?
May as well do sway bar links since I'm in there.
And the brakes at all 4 corners while the wheels are off.
Then I'll order up some 31" tires and that should do it.
Any other suggestions?
Thanks
-
Just lift the front and grip the steering wheel really hard and people will think you are going really, really fast. :D
I don't know about the WJ, but when it comes to Wranglers many guys try to steer clear of Rough Country lifts. I haven't had one myself, so I really can't comment too much but I do know a guy that didn't even get a year out of his Rough Country lift kit before swapping it out for a different one. At least one of the shocks was totally beat and he wasn't a hardcore wheeler.
Def
-
@Grant Lamontagne said:
Just lift the front and grip the steering wheel really hard and people will think you are going really, really fast. :DI don't know about the WJ, but when it comes to Wranglers **many guys try to steer clear of Rough Country lifts. I haven't had one myself, so I really can't comment too much but I do know a guy that didn't even get a year out of his Rough Country lift kit before swapping it out for a different one. At least one of the shocks was totally beat **and he wasn't a hardcore wheeler.
Def
So I am reading on a number of forums. I reached out to Kolak and am getting some advice from him. He's some sort of Jeep performance guru out in US Mountain time zone somewhere.
He is suggesting Iron Rock Off-road. His 3" lift suggestions are tempting but put me in a whole different spending and replace - parts bracket.
So I'm settling back to a 2" lift, and he's been very helpful in the decision making process.
-
@The Lone Wanderer said:
I own a 1998 ZJ, 4.0, NP242, my daily driver. My Dad has a 1994 ZJ, 5.2, 268,000 miles, retired now since he got a newer SUV.The ZJ was originally intended to be the next Cherokee. It tested very well, and opinion ratings in focus groups were very high. But when focus groups were told it would be replacing the Cherokee, it was all pitchforks and torches. Nobody wanted the Cherokee replaced, but they did love the ZJ. Hence the ZJ was instead marketed as a separate model and the GRAND Cherokee was born.
-
We have a 2015 Cherokee, and love it. It's a run on the mill SUV, and is not built or intended to be an off-roader (including the Trail Hawk IMHO). What it is is a great family hauler, and very comfortable and nice to drive. Also, most people buying them have no idea what the old Cherokee is, nor would they care.
I had a 2002 WJ that I lifted 4" (Rough Country
) and put 32's on it. I slowly built it over 4ish years, and when it got to the point of being built to how I had pictured it, it was time for a change. So I bought a 2005 TJ Rubicon.Now you can call me all the names you want, but I believe the TJ is the last of the "real" Jeeps. Now of course that's just my opinion. I think a Jeep should be something small, nimble and easy to work on. JK's and now JL's have far too many electronic gizmos, computers and sensors in them.
A CJ on coil springs would actually be my ideal Jeep. Stupid simple, and with coils, half decently comfortable.
-
@derekmac said:
We have a 2015 Cherokee, and love it. It's a run on the mill SUV, and is not built or intended to be an off-roader (including the Trail Hawk IMHO). What it is is a great family hauler, and very comfortable and nice to drive. Also, most people buying them have no idea what the old Cherokee is, nor would they care.I had a 2002 WJ that I lifted 4" (Rough Country
) and put 32's on it. I slowly built it over 4ish years, and when it got to the point of being built to how I had pictured it, it was time for a change. So I bought a 2005 TJ Rubicon.Now you can call me all the names you want, but I believe the TJ is the last of the "real" Jeeps. Now of course that's just my opinion. I think a Jeep should be something small, nimble and easy to work on. JK's and now JL's have far too many electronic gizmos, computers and sensors in them.
A CJ on coil springs would actually be my ideal Jeep. Stupid simple, and with coils, half decently comfortable.
After test driving the new Cherokee, I came to the same conclusion. A nice Nissan Rogue or something, comfy, all that, but it hurts to see that done to the Cherokee name. They could have brought it to market under some other name and it'd be fine.
Ya just can't tell me that nobody wants a tall, capable 4x4 SUV as long as Toyota keeps making the 4Runner like this.
I've enjoyed reading about your WJ Grand and seeing the videos of it here. It gives me hope for mine. I'm starting out with two inches of Iron Rock Offroad coil lifts with new coil isolators, and Pro Comp series 9000 shocks. New Moog sway bar links and brakes for all four, and will see how that rides for a bit.
I can see myself getting a YJ at some point, but yes, the holy grail of Jeeps is the old CJ. And I can agree that some nice coils under one of those would make it nice.
Also agree with you about the TJ being the last of the greats. Too much electronics in the new Jeeps. Especially for a company known for being cheap on wire lengths in harnesses and such. Most of the time a Jeep power window craps out is because the negative wire between the door and the jam has cracked, because they are too short for the distance.
Funny to see how many people look down on the WJ, when compared with the CJ, YJ, and TJ, the WJ has the same Dana 35 diff in the rear and Dana 30 up front, the same motor, longer wheelbase, wider track, more storage space, more towing capacity, and can do it with a little bit of style.
It is the Star Trek The Next Generation of the Star Trek world. In many ways a superior product, but will never be as recognized as the original
But it's small wheelwells limit the tire size, so despite its breeding and muscle, it starts from a disadvantage.
-
I was heavily involved with the local Jeep club for a number of years, I don't own it anymore but here's a couple of shots of my TJ on a trail at one of the factory sponsored Jamborees


-
Greg, if you don't mind me saying, that's a rather "slick (er)" looking Jeep in those pics.
Eh? See what I did there?
-
My WJ pre- lift

-
.

-
My WJ post-lift

-
.

-
This is with a combination of new Crown Automotive and new Moog coil spring isolators, all 8, plus Iron Rock Off road coils to bring it 2" above stock. Pro Comp 9000 series shocks and stock Moog anti-sway bars.
By the way, Kolak on the Jeepforums is the guy to speak with if you are looking to modify your WJ at all. He just knows them inside and out and suggested my mods here. He is out of Arizona. Don't know if he can service Canada customers but I wouldn't be hesitant to contact him. (Sorry Mods, I don't mean this as an advertisement) I'll be doing so for some other parts. I am very happy with Kolak's suggestions and his customer service.
I am doing this in stages, so i havent done everything that has been suggested yet. As a result...A pucker-inducing wobble does develop, but only after hitting patches of pot holes at highway speeds. I can keep from doing that until I get a new Panhard rod, tie rod ends and steering damper. That's my next stop. Then tires and an alignment.
Sure it's only August, but I'm trying to get all this done during hurricane season and before the first snow flies.
-
Thank you Derkmac for confirming for me here, that it IS worth it to do this to a WJ.
-
@ThundahBeagle said:
Thank you Derkmac for confirming for me here, that it IS worth it to do this to a WJ.NP, the WJ is a great platform to build. The Jeep is lookin good!!

-
I guess I should add a little update for my TJ.
At the Pirate Off-road Nation Valley Invasion (massive off-road event), I won a set of five General Tire tires (any size I want). I went with the Grabber X3's in 35x12.5x15.
Now in order to be able to run these tires, my Jeep needed some upgrades. I installed a new ZJ tie rod, which is much stronger than the wimpy TJ one. I have also ordered a JKS adjustable front track bar, and a 1.25" body lift.
A friend gave me a set of 4" rear coils (3.25" lift when installed), so I got those installed. My old coils gave me 2" of lift. It's now sitting with a little too much rake, so I'm going to raise the front another 0.5". Once I get the BL and get it installed, it should clear the new tires nicely. :)
The pic is how it's sitting right now.
-
Don't have a Jeep atm. but big fan of the offroad myself.
Subscribed

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login