Shop projects
-
One thing I don't like about the Shopdog is how the top rail must be separate because of the way the legs cross.
This is what I came up with.... a prototype made from old pallets:
First I needed the tops of the legs cut to 20° in this shape:




All under the watchful eye of my Supervisor:

Next time I will try a more accurate method of cutting.
-
I chose these hinges because I thought their length down the legs would be good. In hindsight their pin is very short and I think butt hinges (like for doors) would have been better.:

Getting there....

Now to cut the legs down:

I thought about housing the leg braces in but it became too much of a faff with my limited tools:

So I only did one side. -
Not quite finished but it will do for now:

The plan is to make some sort of brace to stop the legs from spreading although it doesn't really need it.One side housed, the other not :-[ :

The top rail is only screwed to the legs on one side:

Uh oh, she found me... :ahhh

-
They look great Mate, very useful

It's always a good sign when all 4 legs touch the ground
-
Cheers Sparky, it is very strong and works well. 
@Sparky415 said:
It's always a good sign when all 4 legs touch the ground
If not, I could call the vet and tell them I have a saw horse....

-
Looks good, are you going to run a chain at the bottom?
JR -
Maybe chain or rope, but I would prefer something rigid like a wooden or metal brace so that it keeps it's shape if you want to quickly move it.
-
@Syncop8r said:
Maybe chain or rope, but I would prefer something rigid like a wooden or metal brace so that it keeps it's shape if you want to quickly move it.Well if your want to go solid how about taking a piece of plywood, hing on one side then run two strips on the other side so when it drops down that cross piece fits in between? This way when open it will also give a platform to store stuff on too?
JR -
I've thought about something like that, not sure if I want to store stuff there as it means I have to bend down to get it. ;)
The two strips is a good idea...

-
I made a rainstick, not the real thing but the pringles version. I think I need to double down on the three runs of nails I put in cause it only lasts about 2sec if lucky. I’d so love to get the real thing though, I could just sit there for an hour with one, I did when I was at my grandparents back in the day..
JR
-
I ended up doubling down each strip, I must say it sounds much better, still nothing like the real thing.. but closer..
JR
-
Hey sparky, I want to tap your brain!
I need something for my shop, I need like paper towels but too big, I’ve been using napkins, that’s more the size but I’d rather have them on a roll, so what about a toilet paper roll? But how do I hang it or put it somewhere? Thoughts?
Here’s something I found, I remember I saw something else long ago but can’t find it..
JR


-
Something hanging down from that shelf?
Something made from copper pipe fittings?

-
@Sparky415 said:
Something hanging down from that shelf?Something made from copper pipe fittings?

I had a brain fart but ran out of time, have to go to court tomorrow bright and early for a friend so maybe after we get home i can try my idea out, if it works I think your going to be shaking your head, but yet with a smile :D
JR -
Good luck in court Mate

I will get a picture of mine this afternoon, very ordinary
-
I have one of these (second hand) from Ikea, I removed most of the rods and screwed it to the ceiling
The hooks make a handy place to hang stuff while paint is drying etc
GRUNDTAL stainless steel, Wall shelf, 60 cm - IKEA UK
GRUNDTAL stainless steel, Wall shelf, 60 cm. Saves space on the worktop.
IKEA (www.ikea.com)

:pok: Your idea? :popcorn:
:D :cheers:
-
Nice, there is a rod since it is technically a closet in which I could put through but to put a new roll on every time would be a pain, but I did think of doing it last night! As for my thought I went ahead and did it, I found the pic I remember I saw long ago and after seeing it I new what to do but in which way, I had the perfect container and in the one pic you can see it has the perfect spot to cut out to allow the tp to roll through, or do I do like that soda bottle looking one and rip the core/tube out and pull it through the end? Anyway I figured the center would be better because it would make it easier to get in the container and easier to hang, I think it turned out pretty cool, when I need a piece of tissue just reach up and pull down..
JR

-
Cool idea

I had those blue rolls kicking about in the garage for ages, always getting lost or covered, before I got organised

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login