Awls and Chisels for LM Charge, Wave, Surge
-
Got a couple of bits waiting to send to you here Raukodur. (If that darn bit extender from L'man ever shows up!)
I made the bevel angle on the chisel steeper, so that it won't tend to "dive in" as much when cutting. I also rubbed them up with gun black, so that they would match the rest of your tool. (After all, we multitool enthusiasts wouldn't want to commit an embarrassing faux pas in public by having our bits clash with our tool now would we?) ;)

-
Those look amazing Bob :D Cannot wait to test them out, hopefully LM will have their bit extender in stock soon.
Thanks for going the extra step and blackening them ;) Can always tell a master craftsman by the attention to detail.
One point, maybe I missed it on the photos (my screen isnt too good), do the bits need to have a small slot on either side where they 'slot' into the bit driver, like we see on the sides of the bits provided by LM? If not, are they not necessary? I guess the bits may be held quite tightly without the slots.
-
:-[ Ummm...hang on a moment. (Sound of dremel tool in the background. Sounds of cleaning solution being opened, black oxiding, re-oiling.....)
There we go!


-
-
They look stunning Bob! As if made by leatherman themselves. You should find out if there is a market for these things and start selling them, I mean who doesnt want to add two new functions to their multitool without having to alter it in any way?
-
@Raukodur said:
They look stunning Bob! As if made by leatherman themselves. You should find out if there is a market for these things and start selling them, I mean who doesnt want to add two new functions to their multitool without having to alter it in any way?Anyone with a Leatherman bit driver should want them, especially the awl. There are just so many occasions where an awl is needed, yet so many multitools that don't have one.
However, the whole idea about discussing this topic in the Mod Forum is to show how easy it is for folks to "do it themselves." Seriously, I've got less than $2 invested in a 5/16 spade drill bit, and about ten minutes on either a dremel grinder or an ordinary bench grinder. Go give it a try guys!

-
I think it is also worth mentioning that the metal that these bits are made of will also braze (silver solder) very well so those bits with drill bit or long driver extensions are quite easy to do after a bit of practice. This also works with standard bits. The way to look at it is if you want something just try it, if it fails you have just waisted 5-10 minutes :-[ but if it is successful you will have exactly what you were after with the knowledge that you made it happen.

Dave
-
Recieved those bits today Bob, they are awesome! I am really busy at the moment (have a three week clinical anatomy course) so cannot post any pictures right now, but as soon as I am free I will test them out and post my findings. Cannot wait!
The saw also looks brilliant, will also test that out when I get the chance.
Amazing to think that my Charge acquired two new functions today!
-
Glad to hear that they arrived safely sir!

-
Tried out the awl really quickly, works like a charm! Makes holes in a wide variety of hard meterials in no time, can really work the thing too because its made out of a drill bit which is made for this type of use, and because at the end of the day its replacable.
Same with the chisel, works perfectly for little jobs, and it is so easy to use in the charge bit holder, the fact that you can flip it over to use the other side of the edge is also quite useful.
I have to say Bob, you have outdone yourself with these, I really think you should start making and selling them.
-
Does it work on Mother In Laws? Cause if so, I'll take a dozen... >:D
Seriously, Bob does some good work!
Def
-
Hey, I'll take just a wee bit of the credit for this one...it was all Raukodur's idea in the first place. I never would have thought of it. And like I've stated earlier in this thread, ANYONE with a bench grinder or a dremel tool can make these extra bits. They're very easy, very inexpensive, and very useful.
(And how often does that ever happen these days?) :)
-
I hope you kept some to yourself to play with?
Def
-
They're very easy, very inexpensive, and very useful
When you combine that with the fact that most people are either inept at using such tools, too lazy to do so, or just want to buy ready made stuff, then you have a saleable product ;)
The fact that the bits are cheap, and it doesnt take long to make them means you would have low cost of production both in terms of money and time, and they are so small you could easily package them and sell them at a relatively cheap price but also make a nice little profit per each bit.
Maybe Multitool.org should start producing a selling some of its modding ideas...would help raise money for the website, if the tools are stamped with the logo, would help act as the best form of advertisement.
-
Hmmm...you may be on to something there.
-
Along with the bits, there is the metal (and wood) saws you have been handing out free to multitool members, they could very nicely have the multitool logo on the side...
-
Just now getting the chance to read this thread. This sounds like a great idea to me. I'm planning to make a couple of my own. Now that they've had a few months in the field, any feedback as to how they're working/holding up/suggestions for improvement? Thanks.
-
The awl works great as a general purpose poker/knife tip saver/hole starter. No problems at all, and very easy to make.
The chisel I haven't really needed to use very much. :-\
-
And like I've stated earlier in this thread, ANYONE with a bench grinder or a dremel tool can make these extra bits. They're very easy, very inexpensive, and very useful.
I just happen to have a bench grinder.
I challenge you!
I bet a golden goose egg I can't make one (I wonder if I get a discount for buying 100 drill bits to practice on?)
-
J-sews,
I picked up a 5/16" bit this week and went to work on it last night, but when I pulled it out of the plastic and measured the thickness, it was just over 1/16" thick, whereas the LM flat bits are a full 1/8" thick. I checked several of my other larger spade bits and they were all just as thin as the new one. Was the bit you used just as thick as the flat bits, or were you able to make it work even though the material is thinner? Just wanted to check before I go tearing up a new bit and then not having anything useful when I'm done. Thanks!
Tim
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login