Shop projects
-
Nice little setup.

JR -
Thanks !

-
I use contact adhesive for making strops, and the 2nd time I load it with polish some part always comes loose
......any better suggestions? -
Try gorilla glue, I've never had that come apart
-
@Gerhard Gerber said:
I use contact adhesive for making strops, and the 2nd time I load it with polish some part always comes loose
......any better suggestions?I use the same stuff and had no problems
Operator error?

Is your leather clean?
I'm using old belts and gluing down the shiny side, seems to stick ok
-
@Gerhard Gerber said:
I use contact adhesive for making strops, and the 2nd time I load it with polish some part always comes loose
......any better suggestions?Do you coat both surfaces and let it go tacky before sticking them together? Make sure it's well clamped while it sets too.
I'll bet Sparky's got loads of
old smurfheavy things in his garage he uses to weight his down. ;) -
Or bring it along to the UK meet and get Hiraethus to sit on it


-
:D
-
Put a little stain and poly on it



-
looks good
-
After using my mini pallet/skid to place my watch and sak earlier I fig it was time to make another since I had some sticks doing nothing. So I started and now waiting for the glue to dry..
JR

-
Cute!
-
Since the one set dried I had enough to make one more, and ended with “1” extra, but I threw the others together and clamped them before the day was over, so today I can start fresh..
JR
-
Ok, next step.. after that sets then I can do the other side, so maybe in a few hrs, but till then I’ll let gravity run the project

JR
-
Ok, side ones ready, now on to the second side, got to let them sit under the redneck clamps for a few, then file the edges and then put some color into them, but that will have to wait till tomorrow..
JR
-
@MadPlumbarian said:
Ok, side ones ready, now on to the second side, got to let them sit under the redneck clamps for a few, then file the edges and then put some color into them, but that will have to wait till tomorrow..
JRThat's an awesome idea for coasters, no way your glass/mug would get a coaster stuck to the bottom of it with a small amount of spillage unable to hold surface tension
-
The only downside is you would have to purchase many ice blocks. ;)
-
Ok, pretty much done, just drying and maybe put a second coat on, other then that done..
JR
-
Anyone want to guess what I’m working on?
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
