All things paddling
-
Nice one Alan! -
Plan of action:
Make some knives
Sell some knives
Have a canopy built for my Suzuki so...........hopefully I can load my little Feel Free Nomad and get out on the water again.

It's been a long time.... :-\
Hopefully before the end of 2018

-
@Alan K. said:
If you enjoy kayaking up there where it's cold I bet you would really enjoy an excursion down here to Florida where the water is warm and clear.When I was in Orlando in '09 for SHOT I was amazed at all of the great places you could go kayaking there. There were streams almost everywhere and they all looked like great places to go paddling.
Then I remembered what lives in all of those waterways, and decided that maybe it wasn't such a good idea after all.
Then I got a backstage tour of Gatorland, and got up close and personal with some of those things and decided that paddling in Florida was really something I could probably do without after all....

Here I am with a 13.5 foot, 1,000lb + gator named Chester:

Here I am with a (well secured) 5 foot, 200lb gator, who's name I never learned:

And here I am being killed and eaten because my Charge wasn't able to repel jaws of that magnitude:

If you are interested in seeing the whole experience, this is the thread:
/topic/8705
And for those of you paying attention, it's the same Johnny that I recently posted about, going back to Gatorland after ten years:
/topic/77762
Def
-
@Grant Lamontagne said:
@Alan K. said:
If you enjoy kayaking up there where it's cold I bet you would really enjoy an excursion down here to Florida where the water is warm and clear.
When I was in Orlando in '09 for SHOT I was amazed at all of the great places you could go kayaking there. There were streams almost everywhere and they all looked like great places to go paddling.
Then I remembered what lives in all of those waterways, and decided that maybe it wasn't such a good idea after all.
Then I got a backstage tour of Gatorland, and got up close and personal with some of those things and decided that paddling in Florida was really something I could probably do without after all....

Here I am with a 13.5 foot, 1,000lb + gator named Chester:

Here I am with a (well secured) 5 foot, 200lb gator, who's name I never learned:

And here I am being killed and eaten because my Charge wasn't able to repel jaws of that magnitude:

If you are interested in seeing the whole experience, this is the thread:
/topic/8705
And for those of you paying attention, it's the same Johnny that I recently posted about, going back to Gatorland after ten years:
/topic/77762
Def
That... must have been an interesting experience, to say the least...
-
You've never been eaten by an alligator? Oh, it's an experience everyone should have at least once in life! :D
Def
-
Those pictures are actually from the Orlando area. They were taken by a news crew in a helicopter that happened to see the gator swimming with the deer in a lake about 10 or 15 years ago. I save them to post on special occasions. Listen, Grant, I'd be squatting behind a bush too if I'd been that close to a 1000 pound alligator. Nothing to be embarrassed about. ;) We're all human.
-
Grant, Alan, great pics and stories !
Pics below, boat in dry dock for some tweaking, new dragonfly salt cos we all like our toys, common jellyfish and a rare pic from on the water :)




-
Beautiful!
I'm visiting my parents this week, so I'll have lots of new paddling photos soon!
Def
-
Did your kids graffiti it?

-
I got into paddleboarding a few years ago. Bought a used 14' rigid board and a used 12' 6" inflatable board off a friend. There's lots of places to go around where I live; the ocean is a 5 minute drive, and there are numerous alpine lakes to hike up to and explore. We also have 3 major rivers close by so there's a lot to do.
-
While cleaning out my cargo box yesterday to re-attach it to my trailer properly I decided to take some photos of my equipment for this thread.

First up are my kayak carts. These are invaluable for transporting a kayak (or canoe) and they fold like a 70's lawn chair so they are easy to take along with you. These are both Wheeleez brand carts. I have seen others, but these are the only ones I have used and I am very happy with them. The nice thing about them is that the wheels (pictured below) are not only removable, they are also replaceable. I have the all terrain tires, but there are also ultra wide tires for going across soft sand. I've never felt the need to get them, but I like having the option.

I've put an awful lot of mileage on these carts and appreciated having them every time. There have been times that I left them behind and really regretted it.

My only real complaint about them is that they don't fit in the hold of a kayak and have to be strapped to the deck, which can be a pain in the arse.

This is my Fox 40 safety kit. It should contain a flashlight, signaling device, bailing device and a floating rope, but it doesn't. The flashlight was a cheap incandescent that died almost immediately, the signalling device is a reflective bit inside the cap, the bailing device is the bucket everything is contained in and the rope is.... well, it's a rope. In Canada one of these kits is required for each boat, but I accidentally left one in my parent's boat, so I will have to get a replacement or risk the $250 fine for not having it if I get caught. The kits retail for about $10, so I'll probably pick up a couple of new ones this week.

This one isn't so much a piece of paddling equipment as support for the paddling equipment. It's a silicone desiccant pack and I keep four of them in the cargo box. It makes sense, as many things are likely to be wet when put away, and I don't want my stuff to get moldy. As my cargo box is 250 litres and each rechargeable pack is good for 80 litres, I have four of them that I keep in the box at all times, except for ow as I have them in the house to recharge them in the oven.

This is one of many waterproof boxes that I have along for the ride. It is currently used for holding extra R pins for the kayak carts. R pins are used to quickly clip the wheels on, and are frequently lost, so I carry spares just in case. In fact, I think I will need to get a few more soon, as I am running low. This particular box is a GSI Extra Small Lex model in orange. I have to say that I wasn't overly thrilled with this one when compared to Otter or Pelican boxes. The plastic seems more brittle and the clips that hold it closed aren't as easy to use as the Pelicans and Otters, which is why it stays in the box and holds spare equipment instead of going on the boat and holding wallet, phone, keys, cameras etc.
Speaking of boxes....

This is my big Plano waterproof box, and I've been using this one for years. It is uber cheap and not always the most waterproof box, so it has also been relegated to spare carrying rather than actual use. It was $25-30 at Canadian Tire and it's bigger than the Pelican 1150 box that I have which is almost $100. There's a good reason for that- this one is is kind of flimsy and the steep bars that hold the three clips on fall out from to time.


Inside I keep some wiring, spare bolts, nuts and washers and wrenches for trailer and equipment repair, spare rope and other random bits and pieces just in case. It is here that I have decided to keep my new wrenches.

Next post is the paddles... buckle up, that is the long bit!
Def
-
nice one Grant
-
These are my fastest paddles. Many of you will be wondering how one set of paddles can be faster than another, but there are serious differences that affect performance.

These are Cannon Wave paddles and are generally considered best for whitewater. They are a fiberglass shaft and polymer blades, and, as you can see, the blades are short and broad so they move a lot of water, and, just as important, the shaft is also very short which encourages a high angle stroke, which generally equals more power. This type of paddling is faster, but also more tiring, which is why it is great for whitewater as it gives lots of control and speed for short periods. It's not great for longer trips as you get wiped out a lot faster. As you can see, these have been (messily) repaired after the fiberglass split on me in the middle of the lake and I lost a paddle blade. I was able to recover it and some fiberglass tape and epoxy fixed it right up. It looks terrible, but they work well, and that's what matters.

These Aquabound paddles are the complete opposite of the Waves. They are also a fiberglass shaft and a polymer blade, but the shaft and blades are significantly longer. The blades are also narrower, meaning these push a lot less water. The longer shaft encourages a low angle paddle which saves a lot of energy, which, coupled with the narrow blade means this paddle is much, much slower, but great for long distance paddling, since it means that you are not exhausting yourself. I actually carried these as spare paddles a few times, and at one point one paddle half was swept off my boat and into the ocean. As I was concentrating on not being dead, I hadn't noticed the loss of the paddle until I was safely on shore and packing up. I was pretty bummed, but at Paddlefest the next year they coincidentally had a matching paddle half. I don't think it was my original since I lost it on the opposite side of the province, but it was an amazing stroke of luck to find the exact paddle half I'd lost!

These Aquabound paddles are very similar to the black ones above, only not quite as long, and they don't have a cool story to go along with them like the black ones. :D

I have two almost identical sets of these, and they are Megan's favorite to use. These Accent brand paddles are all carbon fiber, which means they are super strong and remarkably lightweight. They are the lightest paddles I have since both have shafts and blades made of carbon fiber. Both of these put together weigh less than any other single set of paddles i have, and almost feel like there's nothing there at all. I love these paddles too, and, since Megan usually uses one set, I usually bring the other set along as spares. Why do I need spares? Re-read the section above where I say I broke a paddle blade off in the middle of a lake once... always bring at least one set of spare paddles, because a long walk home is made much longer when you have to drag a boat with you.

These are mu favorite paddles- they are also Accent paddles and have a carbon shaft and polymer blades. What sets these apart is that they are bent shaft paddles, which are not only more ergonomic, but also add about an inch to your paddle stroke. They are a lot less common than the straight shaft paddles, and despite being technically better, not everyone likes them. This is my second set of bent shaft paddles. I lost one half of my first set a few years ago and I was devastated, as it was due to stupidity and not a legitimate accident like when I lost the paddle half in the story above. Luckily I managed to come across these ones shortly afterwards for an excellent price. They were brand new, but had been slightly damaged in shipping- you can see the tip of the blade was snapped off, and so I picked them up for a fraction of what they should have cost. The chip doesn't really affect the way they paddle so I've been paddling with them as is, although I do have many other paddles that I could swap blades on if it ever started to bother me. I do manage to have a little fun with it though, as I have convinced my nephews that the tip of my paddle was bitten off by a shark while paddling in the ocean. :D
I have a few other paddles as well, but these are the ones that I usually bring with me, even though the carbon fiber and bent shaft paddles are the only ones that regularly get used.
Def
-
That's quite a setup......as it should be!

-
@Gerhard Gerber said:
That's quite a setup......as it should be!
It's worth mentioning that most of this is the result of buying second hand, bargain hunting and costs spread over many years. Not counting the trailer, I am well over $10k replacement costs for two boats and the equipment kept in the cargo box. I have a lot less than that actually invested in it though.
The carbon fiber paddles and bent shaft are all worth about $400 each, but I got them for less than $100 each by looking for ones with minor damage and getting them at liquidation pricing. The fiberglass paddles are worth around $150-200 each, but some were bought for as little as $10 because they were rental units being liquidated. My fiberglass boat was also heavily damaged when I bought it- new it goes for about $3200, I bought it for $275 ten years ago. Even counting the $$ I am spending on it to repair it, it is still well below market value. Megan's boat cost me less than $1000 because I bought it for $800 on sale, instead of the $1200 it was originally going for. There was no damage to it, it was just an end of season sale.
I am proud of the stuff I have, as I believe I have a pretty good setup, and my biggest worry is that it will all be stolen or damaged at some point and I will have to replace it all at real costs rather than what I paid for things. Much of what you see above was slowly upgraded from cheaper equipment as I found deals on things- for example, I started with a paddle that had an aluminum shaft and polymer blades and they weighed a ton. I also started with a standard neoprene life jacket, which, under normal circumstances would be extremely comfortable but rides up in a kayak and restricts movement. I also paddled for years without a safety kit....

Def
-
Here are a few pics of some of the Lamontagne Fleet.


The yellow/orange one is the Point 65 XO13 that Megan usually paddles. When I got it, it had gas pedal style foot pedals to control the rudder, but with my messed up ankles, the gas pedal style doesn't work for me. The gas pedal style rotates around a pivot point, so I changed it to L style brackets that push back and forth. Those are a simpler, cheaper options and not a lot of manufacturers offer them any more as they seem pretty basic.
The blue and white one is my father's Riot Tourlite 15, a thermoformed plastic skin on frame design similar to my big fiberglass boat. Instead of fiberglass (or kevlar or carbon fiber etc) the Tourlite uses a plastic sheet that is heated and moulded over a frame to create a multi chine hull for added stability. The design didn't last long, likely because of the expense of making it, but makes for a nice boat that combines the (almost) lightweight factor of fiberglass and the added resiliency of the plastic, which is less brittle than fiberglass. Unfortunately it is a bigger pain in the arse to repair than fiberglass so you have to be really careful with it. The skin on frame design allows for a much sharper keel, which you notice when paddling in rougher water. This boat, like my big fiberglass one, tends to punch through waves and pop out smoothly on the other side, while the rotomoulded plastic boats have a flatter hull that tends to go over the waves instead of through them.
Speaking of rotomoulded boats, like the Point 65 boat above, the green one is my brother's rotomoulded plastic Current Designs Whistler 14. It's a nice boat with a rudder and is a bit more compact than the Point 65, despite being a foot longer. The forward deck is a lot lower, while the Point 65 deck feels like it was moulded with a beach ball in the cockpit. My brother also has an MEC (Mountain Equipment Co Op) Aegir deck bag. I originally got one for my own kayak, but it got in my way more than it helped, so I gave it to my father, who liked it so much that he also got one for my brother. :D
Rotomould boats are usually stronger and more stable than skin on frame designs, but they unfortunately weigh almost twice as much due to the thickness of the plastic. In fact, my 17 foot boat weighs in around 40 pounds, while the Point 65 13 foot boat weighs 52 pounds. The flip side is that a fiberglass boat costs 2-3 times as much as a rotomoulded one, and a kevlar of CF boat can be double that of a fiberglass one.

These are also part of the Lamontagne Fleet- a trio of Pelicans, made by the same folks that do the Pelican boxes, flashlights etc. The Canoe is a Pelican Explorer 14.6 DLX and included moulded in seats and cargo box/center seat. It is a nice, robust boat that suffers from being quite heavy. I have paddled this boat and I like it a lot, although this isn't one you want to paddle by yourself due to the weight.
The red and white one is a Pelican Summit 100, a ten foot molded plastic boat using Pelican's proprietary RAM-X plastic that is surprisingly strong despite it's thinness. It has no frame- it is just two molded halves heat sealed together and weights all of about 35 pounds. It's short, being only ten feet long but is also remarkably wide, making it super stable. I have one just like it in my garage in Halifax that I picked up brand new from Canadian Tire for under $300. This particular one belongs to my older nephew.
The blue one is an older version of the Summit, made from a thicker plastic and is a rotomould. It is also the boat that is responsible for all of the other boats in the Fleet. This is the boat my father started paddling in, when friends visited with a pair of them. He tried it and liked it, then when they decided to upgrade, sold him this one, which he paddled for a couple of years before upgrading to the Riot. My brother and I paddled this Pelican for years until I got my big fiberglass boat and my brother got the Whistler. Then I got the Point 65, my brother's wife wanted the canoe and so on and so on. My younger nephew now paddles this boat, and is a lot more interested in paddling than his older brother.
These are inexpensive boats, good for farting around at the cottage, but are not so good for actually covering any distance. They are short and wide and track terribly compared to every other boat in the Fleet. They are stable though, which is great as both boys like to stand up in them and jump off them to go swimming. When the boys get older I have no doubt they will graduate to bigger boats, but at this point they are still unable to keep up with the rest of us on the longer trips the rest of us like to go on.
I hope to add another canoe to the mix soon. I am looking for a decent deal on an old Sports Pal canoe, which is a Canadian brand built not far from here in a city called North Bay. They make them out of aluminum and the boats are extremely light- a 12 foot aluminum canoe will weigh as little as 35 pounds! And, they are very resistant to puncture, but when you do, there is a proud Canadian tradition of repairing them with tree sap and beer cans. :D
Def
-
Some nice equipment here.
Im running some rather simple equipment and gear, really. A 10 foot Wilderness Systems Pamlico, or a 9.5 foot Islander Swifty. They are both about 10 years old and have been repaired with an old Frisbee and a heat gun. An Extra Sport life vest, and some Field & Stream branded paddles. I keep a rope with me, a knife, and whatever I need for lunch and water. I usually just cruise, sometimes blast to one side of a lake and back, sometimes I fish. Scout the ThunderBeagle has been known to accompany me, and I keep him clipped to a harness which is clipped to the seat. He likes to stand at the bow scouting for seabirds or watching for other dogs and animals along the shore, and will alternately jump in and then ask to be hoisted out of the drink.
-
Kayaks on the Jeep WJ a little late in the season...

-
^^^ Wasn't ready to give up for the season...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

