Wave Scissors
-
@Antti Lammi said:
Dont file that other side, only if it absolute necessary. Filing scissor isnt easy and most of people will fail it so that scissors are useless after sharpening
Only Tools Matters

-
@Antti Lammi said:
Dont file that other side, only if it absolute necessary. Filing scissor isnt easy and most of people will fail it so that scissors are useless after sharpening

Only Tools Matters
I had to file the inner side cause a Rolled edge doesnt let the scissors close.
File it only lightly, if you file it too much there will be gap and you can say bye bye for scissors. If that happens you could send it warranty (not sure will that kinda go through warranty) or change yourself scissors.
Only tools matters
-

Its a tricky process, so take your time.
Good luck, sir

-
Some good advice is already been given
so all I will say is good luck in getting them back in order 
-
I have at work some files that my chainsaw operator uses to sharpen the chain do you thing some of this will help me? maybe the flat file? or i need a smaller file



-
I would only use the flat file
it would be best to use a sharpening stone or small flat diamond card 
Guess I still had to put my input in ::) :D
-
Thanks everyone with the help i hope i can fix this i love my wave just make me sad about the scissors i know i know my fault.

I also hear the scissors can cut a medium size zip tie is that right?
-
It is possible, but I'm cautious with zip ties. Some can be hard and dent the edges of scissors. If you do cut a zip tie, be sure the blades are starting the cut at the corners of the zip tie.

-
It is possible, but I'm cautious with zip ties. Some can be hard and dent the edges of scissors. If you do cut a zip tie, be sure the blades are starting the cut at the corners of the zip tie.

better with the knife so no risk will taken
If you can access the zip tie with the wire cutter they work well too. I sniped a bunch with my LM Squirt P4 wire cutters.
-
It is possible, but I'm cautious with zip ties. Some can be hard and dent the edges of scissors. If you do cut a zip tie, be sure the blades are starting the cut at the corners of the zip tie.

better with the knife so no risk will taken
If you can access the zip tie with the wire cutter they work well too. I sniped a bunch with my LM Squirt P4 wire cutters.
You are right that will work too
ill keep in my mind -
I use a sharp knife to get it perfectly flush the first time. Works well

-
@CallsignBadger said:
I use a sharp knife to get it perfectly flush the first time. Works well
I agree but sometimes due the space it is better with the scissors or like Aloha007 said with the wire cuters
-
If you can used the wire cutters, they are great!
-
Very true

And the wire cutters are the fastest option
-
@aolmos said:
I have at work some files that my chainsaw operator uses to sharpen the chain do you thing some of this will help me? maybe the flat file? or i need a smaller fileId say use diamond file or stone cause those files are too rough for scissors. I prefer diamond file for sharpening scissors
@aolmos said:
Thanks everyone with the help i hope i can fix this i love my wave just make me sad about the scissors i know i know my fault.
I also hear the scissors can cut a medium size zip tie is that right?
Yea it can cut medium zip tie but like said start at right point when cutting zip or it will go between scissors, its prolly easier to use cutters to it.
Only Tools Matters
-
When deburring your scissors, do not file or stone against the flat edge, only run it along the edge length of the blade.
The WAve's scissors are IMO intended for paper, cloth, threads and other thinner materials. Cutting heavier or thicker materials is likely not the best practice.
The Surge's scissors are much larger and able to much easier.
Then I am old school and try to use dedicated tools for intended purposes, and my MTs for convenience.
Zip ties I try to use my diagonal cutters, or straight edge blade. You could also saw thru with serrated blade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login