Bit adapter madness
-
Bit adapters seem to be the norm with any new multitool that comes out. I think it's a good idea. Anything thats expands the usefulness of the tool works for me. Some work better than others. Here are a sampling of the ones I have. Do you guys know of any others.
The first is the LM Bit Extender for the LM tools that have the bit changer (New Wave,Charge models, and Surge)
I like the adapter. It really extends the reach of the driver. It can take the LM flat bits as well as normal Hex bits.

-
This is the adapter that fits the Blast, Fuse, Kick, Core as well as the Juice line of tools. It can take LM flat bits as well as normal hex bits.


-
Another adapter is this one that fits on the Gerber Deisel, Freehand, and Suspension. The bits fit nicely with a magnetic holder but the adapter is a bit wobbley on the Gerber phillips driver.


-
This is an older adapter that fits the "Old" LM Wave. It fits over the head of the pliers when the tool is closed. It takes normal hex bits. It's a pretty useful rig that can even fit on a Vic SwissTool.



-
The last one I have is for the SOG line of tools that have the 1/4 drive attachment. The drive attachment can take 1/4 sockets as well a 1/4 socket to hex bit driver attachment. The really expands the type of jobs that your SOG tool can perform.


-
This one I have for Gerber 600 and 400-series tools is very well made. It has a single magnet in the center that retains the bit as well as holds the adapter onto the multitool.


-
Prime, how could you not tell us the most important piece of information?! Which works the best in your opinion, and why? Which works the worst, and why?
How do you think the best type of bit extender would be designed? -
@Raukodur said:
Prime, how could you not tell us the most important piece of information?! Which works the best in your opinion, and why? Which works the worst, and why?
How do you think the best type of bit extender would be designed?I like the two LM adapters. They are both small and are easy to carry and take the LM flat bits nicely. But one very annoying drawback of both of them is when using normal hex bits because they are shorter than the LM bits they sometimes get pushed in making it very hard to pull them back out.
.jpg)
.jpg)
-
Kick, Fuse, Blast, Core and Juice adapter
.jpg)
.jpg)
-
Hmmm, not much a guy can do about that, eh? The extensions have an extra-deep hex receptacle to fit the Leatherman double ended bits, so regular single ended bits get swallowed up. :(
Somehow I'd never tried that myself.
-
Double ended normal hex bits work good in the LM adapters.
.jpg)
.jpg)
-
@prime77 said:
This is an older adapter that fits the "Old" LM Wave. It fits over the head of the pliers when the tool is closed. It takes normal hex bits. It's a pretty useful rig that can even fit on a Vic SwissTool.Hey Prime, we were wondering if the Universal Bit Adapter fits okay on the little Leatherman Mini-Tool?
Link: /topic/1614
-
@prime77 said:
As far as I know LM made two bit adapters. One called the standard tool adapter for the SuperTool and SuperTool 200, but it also fits the PST, PST2, Pulse and Sideclip. The other adapter, the one I have is the "Old" Wave or Universal Adapter that fits every LM except the SuperTool and ST 200. The two are still listed on the LM website. It does fit the Minitool and the SideClip....Never having actually handled either one, I'm still somewhat confused about the differences between the two Leatherman bit adapters. Apparently they only differ very slightly? Here is a decent comparison photo I found showing the two side-by-side:

-
To make things even more confusing, remember reading one time that the "standard" adapter came with a special clamp that could be used to make it fit the old Wave. I can't remember where I found this pic online, I saved it along time ago. I guess the clamps are between the bits and sockets.

-
Here's two more adapters from the Wenger swiss family of multitools. First up is a adapter that fits over the small screwdriver on the SwissGrip. It takes regular hex bits and really extends the reach for driving screws.


-
Next is the adapter that is comes on the Wenger pocketgrip. It's carried at the bottom of the pocketgrip and takes regular hex bits that are carried in a small plastic carrying case that fits in the middle of the tool.


-
Good show Prime, I'd forgotten about those two. Am I correct in thinking that the Wenger PocketGrip one is the only extension out there that is carried "on-board" the tool itself?
-
Hmm, my brother is having a few difficulties finding a leatherman bit adapter that can fit the PST / minitool, anyone have any leads? How much does it cost in the states (since it will obviously be less expensive than in the UK)?
-
He should try the Universal Tool Adaptor:
I think it's a pretty handy little gizmo, and cheap enough. I think it runs about $20-25 or so.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login