Bit adapter madness
-
Hmmm, not much a guy can do about that, eh? The extensions have an extra-deep hex receptacle to fit the Leatherman double ended bits, so regular single ended bits get swallowed up. :(
Somehow I'd never tried that myself.
-
Double ended normal hex bits work good in the LM adapters.
.jpg)
.jpg)
-
@prime77 said:
This is an older adapter that fits the "Old" LM Wave. It fits over the head of the pliers when the tool is closed. It takes normal hex bits. It's a pretty useful rig that can even fit on a Vic SwissTool.Hey Prime, we were wondering if the Universal Bit Adapter fits okay on the little Leatherman Mini-Tool?
Link: /topic/1614
-
@prime77 said:
As far as I know LM made two bit adapters. One called the standard tool adapter for the SuperTool and SuperTool 200, but it also fits the PST, PST2, Pulse and Sideclip. The other adapter, the one I have is the "Old" Wave or Universal Adapter that fits every LM except the SuperTool and ST 200. The two are still listed on the LM website. It does fit the Minitool and the SideClip....Never having actually handled either one, I'm still somewhat confused about the differences between the two Leatherman bit adapters. Apparently they only differ very slightly? Here is a decent comparison photo I found showing the two side-by-side:

-
To make things even more confusing, remember reading one time that the "standard" adapter came with a special clamp that could be used to make it fit the old Wave. I can't remember where I found this pic online, I saved it along time ago. I guess the clamps are between the bits and sockets.

-
Here's two more adapters from the Wenger swiss family of multitools. First up is a adapter that fits over the small screwdriver on the SwissGrip. It takes regular hex bits and really extends the reach for driving screws.


-
Next is the adapter that is comes on the Wenger pocketgrip. It's carried at the bottom of the pocketgrip and takes regular hex bits that are carried in a small plastic carrying case that fits in the middle of the tool.


-
Good show Prime, I'd forgotten about those two. Am I correct in thinking that the Wenger PocketGrip one is the only extension out there that is carried "on-board" the tool itself?
-
Hmm, my brother is having a few difficulties finding a leatherman bit adapter that can fit the PST / minitool, anyone have any leads? How much does it cost in the states (since it will obviously be less expensive than in the UK)?
-
He should try the Universal Tool Adaptor:
I think it's a pretty handy little gizmo, and cheap enough. I think it runs about $20-25 or so.
Def
-
Here is a adapter for the Bear and Son Bear Jaws tool that fits over the rather big phillips driver.
.jpg)
.jpg)
-
I'm gonna have to get me one of them sooner or later....
Def
-
-
@prime77 said:
Another adapter is this one that fits on the Gerber Deisel, Freehand, and Suspension. The bits fit nicely with a magnetic holder but the adapter is a bit wobbley on the Gerber phillips driver.Thanks for the info, prime77. If you would be so kind, please answer the following questions:
-Is this adapter made by Gerber? Is there a source you would recommend?
-How bad is the wobble? Just a slight inconvenience? Bad enough to make using the adapter a PITA?
-Have you verified that the adapter fits all the Gerber multis you mention?
I am contemplating modding my new Suspension to add a bigger Phillips. But, if there's a bit adapter available that'll work with Suspension, that'd probably be a better way to go.
.
-
Yes the adapter you are asking about is made by Gerber. The one I have came with the Diesel model I have. The wobble isn't that bad but it's still there, not enough to make using the adapter difficult. I have the Suspension and the Diesel so I know that the adapter will fit those models. I understand from your modding Suspension thread that you may switch some of the Suspensions tools out for older Gerber tools. If you do switch out the Suspensions skinny phillips driver for the older one you will have to go with the adapter that J-Sews posted because the newer on won't fit over the thicker driver. Hope this helps :)
-
I found this adapter on a cheap tool. Outdoor Edge Trek Tool and thanks to Corrugated thread on SOG parts I put it on the SOG PowerLock and it fits fine. It takes up 5 implements so I don't see much of an advantage to having it. It looks cool though and if you want to use full size hex bits it will work for you.
.jpg)
.jpg)
-
@prime77 said:
Yes the adapter you are asking about is made by Gerber....If you do switch out the Suspensions skinny phillips driver for the older one you will have to go with the adapter that J-Sews posted because the newer on won't fit over the thicker driver. Hope this helps :)Thanks a lot, prime77. That does help.
This adapter looks to be a decent solution to immediately extend the functionality of my Suspension.
Eventually, if I am able to find a used Gerber tool with a bigger Phillips and file that will fit the Suspension, I do want to mod it.
However, this adapter would still work after the mod because my Suspension would still have the smaller Phillips.
So far, I haven't been able to find a source for these adapters.
The Gerber website is extraordinarily unhelpful at providing useful info on products. No decent pics, info on weights, dimensions, and no listings of exactly what accesories are available for the various products.
Is there anywhere that you know of to buy the correct bit adapter kit that will fit the Suspension?
Thanks again for your help.
.
-
I don't know of anywhere that just sells the bit adapter but I'll keep a look out for one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login