What's your latest SAK?
-
@Boonies said:
A couple of 84mm Salesmen that I bought for $19.95.......one older, one later. Both had bends at the tip of the main blade, the later one a sharp bend that I figured would break when I tried to straighten it (and it did) and the earlier one a gentle bend that I rolled out without a break. Re-profiled the broken tip and kind of like it in use. Both of these were Hoffritz retailed. Not too bad for less than $20 I think........

-
@Boonies said:
A couple of 84mm Salesmen that I bought for $19.95.......one older, one later. Both had bends at the tip of the main blade, the later one a sharp bend that I figured would break when I tried to straighten it (and it did) and the earlier one a gentle bend that I rolled out without a break. Re-profiled the broken tip and kind of like it in use. Both of these were Hoffritz retailed. Not too bad for less than $20 I think........
I have to ask...what do you mean by rolled out??? I have a SAK that has a slight bend and with my OCD sure would like to straighten it out. Thanks
-
Basically I use a rolling pin and a hardwood base with a small piece of wood to raise up the tang of the blade. The outside curve of the bend is up against the rolling pin. Roll the pin up onto the blade applying pressure. You can vary the thickness of the small piece of wood for more “reverse bend”. Just kind of work the rolling pin back and forth, it does take a bit of pressure on the rolling pin.
No guarantees, but I have been much more sucessful with this than other methods. Sharp bends have probably already micro-fractured the metal so not likely sucessful there. Have fun....


-
Bought this customized SAK for when I travel lite. I figured I could put my driver's license, insurance card and a $20 under that clip.


-
It will take more than a $20 bribe to get you out of a ticket.....

Very nice.....never would have thought of that as a money clip, pocket clip was the only thing that came to mind.....good use.

-
@Boonies said:
Basically I use a rolling pin and a hardwood base with a small piece of wood to raise up the tang of the blade. The outside curve of the bend is up against the rolling pin. Roll the pin up onto the blade applying pressure. You can vary the thickness of the small piece of wood for more “reverse bend”. Just kind of work the rolling pin back and forth, it does take a bit of pressure on the rolling pin.No guarantees, but I have been much more sucessful with this than other methods. Sharp bends have probably already micro-fractured the metal so not likely sucessful there. Have fun....

Thanks for the explanation and I will give it a try later tonight...thankfully there are no sharp bends.
-
@FolderBeholder said:
Bought this customized SAK for when I travel lite. I figured I could put my driver's license, insurance card and a $20 under that clip.


Can't ever get tired of seeing that mod!!

-
@ThePeacent said:
Can't ever get tired of seeing that mod!!

Thank you! I did have his mod changed a little. I asked that he take off the small Victorinox blade and add the cut and pick tool. I like it for clamshell, hard plastic package opening.
Here's his before picture with that small blade there.

-
Hello everyone
If i am not wrong my last SAK is a 2071r+ :D
-
Excellent latest SAKs everyone

-
A 108mm GAK. It arrived today and will get some TLC over the weekend. I´ll make pics afterwards.
-
I have this horn scaled Champion in route.

-
An SOS single pouch kit with a transition Swiss Champ.
This Champ has the older 8x gray plastic magnifier but with the newer,wider pliers.
New and unused but without a box.
-
@FolderBeholder said:
I have this horn scaled Champion in route.

I like that horn scale...those are some very nice scales on any knife it seems.

-
@FolderBeholder said:
I have this horn scaled Champion in route.

Nice one!

-
This poor fella. Is it possible to replace the broken saw with a 91mm saw?

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

