What's your latest SAK?
-
@Boonies said:
Basically I use a rolling pin and a hardwood base with a small piece of wood to raise up the tang of the blade. The outside curve of the bend is up against the rolling pin. Roll the pin up onto the blade applying pressure. You can vary the thickness of the small piece of wood for more “reverse bend”. Just kind of work the rolling pin back and forth, it does take a bit of pressure on the rolling pin.No guarantees, but I have been much more sucessful with this than other methods. Sharp bends have probably already micro-fractured the metal so not likely sucessful there. Have fun....

Thanks for the explanation and I will give it a try later tonight...thankfully there are no sharp bends.
-
@FolderBeholder said:
Bought this customized SAK for when I travel lite. I figured I could put my driver's license, insurance card and a $20 under that clip.


Can't ever get tired of seeing that mod!!

-
@ThePeacent said:
Can't ever get tired of seeing that mod!!

Thank you! I did have his mod changed a little. I asked that he take off the small Victorinox blade and add the cut and pick tool. I like it for clamshell, hard plastic package opening.
Here's his before picture with that small blade there.

-
Hello everyone
If i am not wrong my last SAK is a 2071r+ :D
-
Excellent latest SAKs everyone

-
A 108mm GAK. It arrived today and will get some TLC over the weekend. I´ll make pics afterwards.
-
I have this horn scaled Champion in route.

-
An SOS single pouch kit with a transition Swiss Champ.
This Champ has the older 8x gray plastic magnifier but with the newer,wider pliers.
New and unused but without a box.
-
@FolderBeholder said:
I have this horn scaled Champion in route.

I like that horn scale...those are some very nice scales on any knife it seems.

-
@FolderBeholder said:
I have this horn scaled Champion in route.

Nice one!

-
This poor fella. Is it possible to replace the broken saw with a 91mm saw?

-
-
@Ron Who said:
A 108mm GAK. It arrived today and will get some TLC over the weekend. I´ll make pics afterwards.Thanks to Codrin for this one. At first I thought there were some rust spots on the knife, but they turned out to be just dirt. After brushing with hot water and some mild detergent, all that was needed was a bit of time on the DC4 to restore the blade and awl to like new condition. There are scratches on the saw caused by sliding the cover on and off, but nothing too serious. I understand why the cover is there, but I removed it. Also because it seems to be a non stainless part. The teeth of the saw are hellishly sharp and aggressive, I don´t think the saw has ever been used. One minor issue: three ends of the scales (i.e. all except the corkscrew end) look like they´ve been used for bottle opening.
Here´s a pic with my two Safari Solo.
PS AFAIK the 108mm are the only SAKs with lanyard holes. 8)

-
-
@Ron Who said:
@Ron Who said:
A 108mm GAK. It arrived today and will get some TLC over the weekend. I´ll make pics afterwards.
Thanks to Codrin for this one. At first I thought there were some rust spots on the knife, but they turned out to be just dirt. After brushing with hot water and some mild detergent, all that was needed was a bit of time on the DC4 to restore the blade and awl to like new condition. There are scratches on the saw caused by sliding the cover on and off, but nothing too serious. I understand why the cover is there, but I removed it. Also because it seems to be a non stainless part. The teeth of the saw are hellishly sharp and aggressive, I don´t think the saw has ever been used. One minor issue: three ends of the scales (i.e. all except the corkscrew end) look like they´ve been used for bottle opening.
Here´s a pic with my two Safari Solo.
PS AFAIK the 108mm are the only SAKs with lanyard holes. 8)
It looks like it will definitely cut a lot of wood there. Nice looking knife there and glad to hear it cleaned up easy!
-
Very nice examples everyone

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


