Brass Rod NOW!!!
-
I always jig 
I am not manly enough to shove the springs about without assistance. Not without blood loss anyway :ahhh
Neil
-
Good to know I'm doing something right. ;)
-
Don't you find that peening from both sides will bend pins sometimes...in knives 4-layers and up that is.
-
I do it by hand. Strong, manly hands. :D
-
@SporK said:
Don't you find that peening from both sides will bend pins sometimes...in knives 4-layers and up that is.Having only girly hands
I've moved to using little girly hammers.Yes, I've bent pins in the past but now I just take an obscene amount of time over it with teeny, tiny, minuscule, feminine tools. Suits my demeanour

Your all just a bunch of ham fisted apes :P
Neil
-
I try to think of those sort of occasions as "learning experiences". Then I generally pick the whole lot up and throw it with considerable force across the garage. Often this will result in severe damage to the knife, so I will swear a lot and give up for the evening> If I'm lucky I'll have to walk past the remains on the way out and can give the thing one last Colorful Enunciationing kick.
Calm.
-
@DaveK said:
I try to think of those sort of occasions as "learning experiences". Then I generally pick the whole lot up and throw it with considerable force across the garage. Often this will result in severe damage to the knife, so I will swear a lot and give up for the evening> If I'm lucky I'll have to walk past the remains on the way out and can give the thing one last Colorful Enunciationing kick.Calm.
Yikes! I do stuff like that all the time when I'm working on stubborn (cough American cough) cars, but usually big heavy metal parts can handle a little frustration :P I really don't favor carrying anything over 3 layers, so hopefully I will never run into that problem, but it's good to know to be careful of that. Is that because brass is a little softer than what Vic uses? That silver nickel or whatever the heck SwissBianco is always insisting is superior? :P
-
Wow I can't believe in less than three days this thread went from "where can I get brass rod?" to "Here is my completed second mod!" Thanks everyone, I hammered this sucker together tonight and it is lovely! I am tempted to keep it for myself, but it will probably end up a gift for someone. It would make a great camping or landscaping/gardening knife. Now it's time to start dreaming and acquire donors, this was about all I could do in the way of a 2 layer with the leftover parts from a champ. I would've made a Scientist if I had a combo tool :P

-
That looks like a cool woody stuff sorter outer 8) :D
You could perhaps thin out the small blade and have it as a kind of super whittler.
Neil
-
Good job Ben. I've always liked the idea of a focused SAK, tool selections that are intended for a specific job. I did a similar one and, as Neil suggested above, I flattened out the edge to give more of a Wharncliffe shaped blade. It makes the blade a little easier to maneuver for detailed whittling/carving duties.
-
Now thats a good mod

-
Hey hey - great start Ben

-
Nice work man. Nice having one done eh?
The brass will go fast, just start doing a bunch for friends and you'll be through it in no time!

-
I do have one more question: Which side of the hammer is best to use? So far I've only done two, and I'm nor sure if it was just me or if the rounded end worked a hair better at making the pins mushroom out more. Is there any difference between using the blunt end and the ball?
-
You're right. Go for the ball

Neil
-
Sounds you are about right. I use the flat face to rough out and spread the head out. Then use the ball-peen to more finely shape it. Different people have slightly different techniques, I tend to go for 1 or 2 biggish hits straight down to start and then smaller hits to finish, the ball end will help work the edges out. The important thing is, once the action is nearly right, to keep checking it. Don't give it "one more for luck", the moment you have got rid of the sideways play stop hitting the pin. If you still have material sitting proud of the bushing then file it down.
When I first started doing SAK mods I hadn't riveted in a long time and some of my early results are ghastly to look at. :)
-
Another tip, that I think originally came from scibeer, is to insert a razor blade between the layers when you first start out with this brass bashing malarkey. pull it out once you've got it about right and then just a couple more wallops. Stops you over peaning. Not tried it myself but it makes sense.
Neil
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login