Wave pocket clip on a Rebar (proof of concept)
-
Or use normal stainless and heat treat it after
you have finished shaping and finished making the clipThat way it will be springy

... and discoloured
>:DYou will have to polish it up

-
I haven't given up on the Wave clip just yet... I'm thinking about fashioning (probably with some sharp files) a block of metal onto something with the profile shown below. Top right is where the clip's insertion leg comes on top, bottom left accepts the rounded-off handle edge, bottom further towards the right where the block would be epoxied to the handle...

-
Progress. JB Weld setting as I write this.




-
Hoping this works

-
is it holding with JB weld
Any problems with this or
does it work okay so far D_T
-
I've decided to let it set for the full advised 24h, which means no results until tomorrow morning at the earliest

-
Makes sense

-
Couldn't wait and tried the clip on/off at 23h 30m after applying the JB Weld. Seems to hold well and I'm happy to report that the wobble is now reduced to max about 1.5 mm at the end of the clip - roughly as much as on my SS ReWaveR. It helps that the filler plate abuts against the handle edge so shear on the bond caused by attempts to rotate the clip about the pivot axis is minimal. The only major strain is in compression, and the bond should be able to manage that. So tentatively I'm happy, but time will tell.
-
Nice one D_T hope it lasts

-
Latest pic:
/post/1796462
-
Glad that it worked out the way u wanted!

-
Looks really good

-
-
Thanks guys!

Almost looks as if LM wanted the Rebar to have a clip, doesn't it?

-
@Dutch_Tooler said:
Thanks guys!
Almost looks as if LM wanted the Rebar to have a clip, doesn't it?

all MTs should have the
option of using a pocket clip

Excellent work D_T

-
Thanks - it appears the idea worked but the execution could have been better. Instead of aluminium for the spacer I'll have to use stainless steel.

-
That’s a shame :ahhh
But should be easy to make out of stainless

-
Well yes, but considering that it took me about an hour and a half to make the aluminium spacer with files and a jigsaw, a stainless steel one might keep me busy for a while ;). Anyway, I've just ordered some sheet stock* [insert tinkering smiley here).*
-
Let me know when you have made one

-

Bottom pic: Crunch assisting



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login