Brass Rod NOW!!!
-
Another tip, that I think originally came from scibeer, is to insert a razor blade between the layers when you first start out with this brass bashing malarkey. pull it out once you've got it about right and then just a couple more wallops. Stops you over peaning. Not tried it myself but it makes sense.
Neil
-
I rarely use the ball part of the hammer.
-
Well it sounds like there's more than one way to hammer a SAK, as uncomfortable as that sounds. I've got a couple of older Executives, by the way, and I was thinking about attempting to add the combo tool. Anyone know how far back they switched to larger pins for the 74mm series? Both of my Executives have a scissor screw, so they're pre-1991ish, is that old enough to have the smaller pins?
-
Pass. Next question please. :D -
@Ben X said:
Well it sounds like there's more than one way to hammer a SAK, as uncomfortable as that sounds. I've got a couple of older Executives, by the way, and I was thinking about attempting to add the combo tool. Anyone know how far back they switched to larger pins for the 74mm series? Both of my Executives have a scissor screw, so they're pre-1991ish, is that old enough to have the smaller pins?No idea, sorry. If you're careful you could take a peak under the scales to see and then push them back down.
Neil
-
I rarely use the ball part of the hammer.
::) Oh, there's always one isn't their :P
It just shows that there is more than one way to do it...the only correct way is the one that works best for you. Nothing beats hands-on experience and practice.
Very true

Here's a weird one I tried the other day. Fine crosshatch file over the brass the hit the file. It seems to push the brass outwards. Like I said a bit weird but you have to try these things. Well I do anyway :D
:ahhh
Neil
-
Not really weird...I've seen slipjoints staked that way before. Not with a file, but a staking tool with that sort of parttern.
I've seen and used a staking tool used in the precision mechanical trades like watchmaking and camera repair with an assortment of different punches and anvils. These all slipped into a heavy base to hold the tools in alignment...a couple taps with a hammer and it was done.
-
Something like this - Burgeon Staking Tool
-
@SporK said:
Something like this - Burgeon Staking ToolThose are cool. Expensive but cool 8)
Trust me to reinvent the wheel :)
Actually they remind me of an old address embosser I have kicking around
I wonder
....Neil
-
Weird, so would pressing the pins not work so well without the Vic factory unit? I know thats how they do it, but I just don't see how it would work. I would expect the brass to swell inside the knife layers or start to bend before it would just mushroom out perfectly into the bushing alone.
-
I finally received my parts back from Mikko and will need to complete my mod by myself (gulp). I am putting a pliers in a Farmer. Am I correct that I need 2.5mm and 3mm brass rods?
-
yes 2.5 and 3mm.
-
Nice easy one to start with then cgk? :D
Look on the bright side, when you master this (and I mean when, not if), everything else will be easy-peasy ;)
Have fun and remember the worst you have to worry about is that you might have to have a couple of attempts, just go slow and steady.

-
Let us know how it goes. A Farmer-Mechanic would rock!
-
I would like to start on my mod. I can not find 2.5 and 3mm brass. Anyone willing to part with a couple inches of each? I can certainly reimburse.
-
Rotokid announced that he found a source for the right sized pins. I don't know when they'll get to him. . .
-
Popped in to my local model shop this morning to find they've stopped selling metric stock ??? Apparently there was too little demand. Whilst I can still mail order, it was convenient to grab a couple of lengths and it was also just the right type (good strength to hardness).
Neil
-
If they don't carry metric, what do they carry?
I thought you didn't use "English" measurements in the UK anymore and it was just us Americans left using them.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Everyone else uses bubblegum and duct tape :D