Brass Rod NOW!!!
-
I rarely use the ball part of the hammer.
::) Oh, there's always one isn't their :P
It just shows that there is more than one way to do it...the only correct way is the one that works best for you. Nothing beats hands-on experience and practice.
Very true

Here's a weird one I tried the other day. Fine crosshatch file over the brass the hit the file. It seems to push the brass outwards. Like I said a bit weird but you have to try these things. Well I do anyway :D
:ahhh
Neil
-
Not really weird...I've seen slipjoints staked that way before. Not with a file, but a staking tool with that sort of parttern.
I've seen and used a staking tool used in the precision mechanical trades like watchmaking and camera repair with an assortment of different punches and anvils. These all slipped into a heavy base to hold the tools in alignment...a couple taps with a hammer and it was done.
-
Something like this - Burgeon Staking Tool
-
@SporK said:
Something like this - Burgeon Staking ToolThose are cool. Expensive but cool 8)
Trust me to reinvent the wheel :)
Actually they remind me of an old address embosser I have kicking around
I wonder
....Neil
-
Weird, so would pressing the pins not work so well without the Vic factory unit? I know thats how they do it, but I just don't see how it would work. I would expect the brass to swell inside the knife layers or start to bend before it would just mushroom out perfectly into the bushing alone.
-
I finally received my parts back from Mikko and will need to complete my mod by myself (gulp). I am putting a pliers in a Farmer. Am I correct that I need 2.5mm and 3mm brass rods?
-
yes 2.5 and 3mm.
-
Nice easy one to start with then cgk? :D
Look on the bright side, when you master this (and I mean when, not if), everything else will be easy-peasy ;)
Have fun and remember the worst you have to worry about is that you might have to have a couple of attempts, just go slow and steady.

-
Let us know how it goes. A Farmer-Mechanic would rock!
-
I would like to start on my mod. I can not find 2.5 and 3mm brass. Anyone willing to part with a couple inches of each? I can certainly reimburse.
-
Rotokid announced that he found a source for the right sized pins. I don't know when they'll get to him. . .
-
Popped in to my local model shop this morning to find they've stopped selling metric stock ??? Apparently there was too little demand. Whilst I can still mail order, it was convenient to grab a couple of lengths and it was also just the right type (good strength to hardness).
Neil
-
If they don't carry metric, what do they carry?
I thought you didn't use "English" measurements in the UK anymore and it was just us Americans left using them.
-
@AndyTiedye said:
If they don't carry metric, what do they carry?I thought you didn't use "English" measurements in the UK anymore and it was just us Americans left using them.
Most stuff is in metric but you still find the occasional oddball tool or the like in inches. I've no idea why they should be able to shift brass in imperial sizes and not metric.

Neil
-
@AndyTiedye said:
If they don't carry metric, what do they carry?I thought you didn't use "English" measurements in the UK anymore and it was just us Americans left using them.
We're a very odd Country when it comes to this. In the 1960-70's we started to move over to metric, got about half way and then stopped. We still think in miles not kilometers, people are still described in feet, inches and pounds. We sell beer in pints not half litres, but we sell spirits in millilitres. ::) If you are buying food by weight then it will be displayed in both price/pound and price/kg. These are just a few examples and there are many more. To top it all off we are only taught metric in schools never Imperial (or English as you would say). Confused? Us? Never :ahhh.
-
@AndyTiedye said:
If they don't carry metric, what do they carry?I thought you didn't use "English" measurements in the UK anymore and it was just us Americans left using them.
As Neil says, there's lot of imperial measurements still used in the UK actually. Things like groceries are measured in Kgs rather than lbs, but all of our roadsigns still use miles for example. It's hard to imagine that we'll ever completely switch to metric.
Most Brits would be comfortable using both I would imagine.
-
Most, yes. Me I wish they'd just do everything in metric. Science background I suppose :)
The only time it really bugs me is with tools. Almost all the tools I use/come across are metric so when I'm confronted with some oddball item with imperial dimensions I have a bit of a :ahhh
moment and get annoyed that I'm going to have to work out a conversion or that the tool is likely not going to be the right size for what I want to do. Last time this happened was with parallel punches in the DIY store down the road. I went and bought elsewhere. Not out of principle or anything so petty but just because I didn't have a clue if they'd fit the holes I'd be putting them through.Neil
-
I'm waiting for time to go metric. What's this 60 sec to a minute, 60 minutes to an hour, 24 hours to a day crap?
:D
-
You can thank the Babylonians and their base 12 math for that. Oddly, no one has really adopted metric time since the French Revolution, other than for computing anyway.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login