A "how-to" for basic SAK mods. Pic heavy.
-
@max6166 said:
Excellent, excellent tutorial! Thanks very much. I am sure many people will find this resource useful over the years.
I am still just a little confused about peening technique. When peening into a bushing, do you just strike straight down with a flat edge?
And if so, how do you get the rounded peen like on an alox knife?
Good questions. I use both the flat and ball ends of the hammer. The flat to start with and then the ball to fine tune a bit, ie make sure it's filling the bush nicely. If there is still play in the tools then back to the flat for a bit more. It becomes a question of feel. All that said SporK told me on another thread that he barely uses the ball-peen at all, so it's somewhat a question of personnel preference as well.
As to the Alox, from the factory they aren't peened but compressed so a lot easier for them. I have only done one Alox mod and had slightly mixed results. Basically I tried to use the ball-peen to bring down the edge and give it that slight domed look. Mostly it worked, but not perfectly, some ended up quite flat anyway.
-
Very cool Gareth I like the pics and the explanation
Very helpful thread :D -
Very well done Gareth

Now it's Neils turn to show his double-sided noodle-wrist teeny-hammer technique...
:D -
@SporK said:
Very well done Gareth
Now it's Neils turn to show his double-sided noodle-wrist teeny-hammer technique...
:DIts very similar, just much slower :D
Hey, I figured the how to swap the corkscrew out tutorial would buy me a <u>bit</u> of time ::)
Actually there are enough differences in the way we do things that another tutorial wouldn't be a total waste of bandwidth. Just no holding me to a time frame, I've started writing my project lists on rolls of wallpaper :ahhh :P
Neil
-
Fabulous tutorial Gareth, simply fabulous!

I've never tried a SAK mod before, being somewhat intimidated by the whole process. But your pictures and words make it sound easy. I'll have to give it a try now. :)
By the way: Thread Made Sticky

-
Very cool, this makes it so much easier than reading 10 different threads covering 10 different aspects of modding. I may even give this a go sometime soon. If I may make a suggestion, can you please clarify the pin diameters for each frame size, just so there's no confusion? e.g.
91mm: 2.5mm outer, 2.2mm (2.25) center
84mm: ?
74mm: ?
58mm: ? -
91mm: 2.5mm outer, 2.2mm (2.25) center
84mm: 2.25mm for all
74mm: 2mm modern, 1.5mm older
58mm: 1.5mmNeil
-
Very well done Gareth

Now it's Neils turn to show his double-sided noodle-wrist teeny-hammer technique...
:DIts very similar, just much slower :D
Hey, I figured the how to swap the corkscrew out tutorial would buy me a <u>bit</u> of time ::)
Actually there are enough differences in the way we do things that another tutorial wouldn't be a total waste of bandwidth. Just no holding me to a time frame, I've started writing my project lists on rolls of wallpaper :ahhh :P
Neil
Please, another tutorial would be great. As I alluded to there are other ways of doing mods and I, for one, would love to see it.
PS. also huge kudos to SporK and his tutorials, and Scibeer for the encouragement when I was starting.
-
Just a thought - we should add tutorials / tips and tricks on modding to the wiki(s) - you can always link back to this thread for discussion (and vice versa), but it's perhaps a bit more structured than a simple stickied discussion thread?
Just a thought really.
-
Excelent tutorial Gareth
thank you

-
@DaveK said:
Just a thought - we should add tutorials / tips and tricks on modding to the wiki(s) - you can always link back to this thread for discussion (and vice versa), but it's perhaps a bit more structured than a simple stickied discussion thread?Just a thought really.
Good thought
:DI am actually learning ppl that doesn't happen much as I am usually to thick to comprehend :D
-
What a great tutorial. :)
Well done mate.

-
Is there a best glue to use for re-attaching the scales?
-
I use Araldite - works a treat.
-
It's a poxy that comes in 2 parts, glue and hardener that you mix to make a super strong adhesive.
-
That would be epoxy, right Ben? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
