Your thoughts on multitool X
-
SOG Pocket Power Pliers Deluxe
Pros:Nice compact size, one of the smallest full set of pliers I know
Tools all have an authoritive snap
Compound leverage makes the job easierCons:Handles cut into your palms with heavy use
I would rather have scissors than the Hex Driver
Tool doesn't flip open and close as good as the Powerlock (weight?)Leatherman XTi
Pros:154CM blades are a awesome
Titanium handles have surface texture enhancing grip
Bit driver to cut down on amount of tools inside handles.Cons:Serrated blade isn't premium steel
Doesn't take standard hex bits
Even though lighter than the Wave, still heavy for pocket carryLeatherman Wave (2004 Edition)
Pros:New locking system on tools works great and very smooth
Option pocket clip makes for another option of carry
Sheath can now be worn horizontal as well as verticalCons:Still the same ol' Wave steel
Bit driver doesn't come with extra bits like the Charge does
Scissors smaller than on the original WaveBuck X-Tract
Pros:All the tools you really need with no extra
Very large one hand opening blade
Sliding screwdriver works like advertised, and very well I might addCons:Outter handles are made of plastic, give me a cheap feeling
No Awl/Reamer....arn't all tools suppose to have one?
Main blade is Combo Edged, wish it was plainSwissTool CS Plus
Pros:Very strong and robust, strongest on the planet!
All the tools open from the outside
Bit kit with wrench may add more weight but well worth itCons:Weight, have to notch my belt tighter
Highly polished surfaces sometimes make screwdriver slippery
(really hard to think of cons for a Vic product)Swisstool Spirit
Pros:New compact design is smaller than ST but serves up a strong package
Contoured handles make cutting wire and turning bolts more comfortable
Very resistant to rustCons:New butter knife blade is odd, but useable
New scissors use a new spring design and don't open as much as the ST
Wish it had a one hand opening bladeCRKT Zilla Tool
Pros:Pocket clip...woohoo!
Very strong pliers
One hand opening bladeCons:Knife has to be wrist flicked hard to lock decent
Tool is huge and doesn't have any many tools as other on the market
Bits are held in by magnet, and not held in very well eitherCRKT Guppie
Pros:Carabiner clip as well as pocket clip makes for easy carry
Mountable LED light makes working in low light easier
Crescent wrench works well in spite of sizeCons:Carabiner gate sometimes doens't snap close right
When using the knife, the ergonomics don't work right
Can't have the bits on the tool and clip it to you pocket at the same time (too bulky)SOG CrossCut
Pros:Very powerfull scissors thanks to compound leverage
Include toothpick and tweasers....nope it's not an SAK
Small designCons:Scissors sometimes bind up on matierials due to gears being in the way
Toothpick is fixed to the tool, so pick you teeth in private, people give you funny looks
No Phillips driverSOG CrossGrip
Pros:Pliers may be small but have a hurcules type grip
Includes phillips driver
Little pouch to carry it in your pocketCons:Phillips works, but more thought should have been put into the design
Small handles hurt your hands if you try and use it for "bigger" projects
Tweesers really not needed on a plier tool -
Buck Model 355 "Bucklite"
+Very compact when closed but still comfortable under pressure when open.
+Icons on the tool handles inform the user of which tools are available at a quick glance.
+Pliers are very strong.-Tools do not lock and the slip-joint style of holding them open does not "lock up" solid and is subject to a slight wobble that makes the tools much more likely to close when using a lot of forward pressure.
-The handles flex a lot when applying pressure with the pliers.
-When using drivers or twisting something with the pliers the handles tend to begin closing, this being a problem caused by the overall opening/closing function of the tool.Buck Model 350 "MiniBuck"
+Smallest, lightest "full-size" pliers-based keychain tool.
+A good selection of implements also coupled with icons on the handles displaying which tools are where.
+Pliers are small enough to use in very small spaces and pick up very small items easily.-Handles flex easily when using the pliers; pliers are a strictly light use item.
-Some of the opening points for certain tools are ground really thin and long and easily dig under one's fingernails when opening, causing pain.
-Cap lifter is super-tiny and a questionable addition to a tool with so many other good choices.Gerber AutoRecoil
+Spring loaded pliers in 2 ways; one, the pliers are loaded under tension and shoot out of the handle. Two, the pliers feature a spring at the pivot point to hold them open and provide tension when squeezing them closed. Totally totally awesome.
+Outside opening tools.
+Includes a very long Philips driver, rare on Gerber tools.-Tool is very very thick, at it's thickest point it is as thick as the Leatherman Core.
-The release spring for the outside tools is the same one used to fire the pliers thus making the implements fairly difficult to close when the pliers are closed and too easy when the pliers are opened.
-Pliers are not always that easy to retract into handle since one must either find an object to press then against or use a body part to push them back in, the latter is usually a painful proposition.Gerber Freehand
+It's friggin' huge! Pliers are beefy, knife blades are long, and has good weight.
+Outside opening tools are easy to access.
+The handle/plier apparatus has been updated from prior Gerber models and is a vast improvement. No pinching!-It's friggin' huge! Weighs too much, includes too litte for how big it is and the sheath is ridiculous.
-Short implements are too short and too small.
-Includes a ruler. -

Leatherman Vista pruning tool- Much better quality than junky pruning multitools from China
- Properly shaped shears and comfy grips = able to prune larger size branches
- Long length saw blade, awl, phillips screwdriver
- Knife blade is WAY too short
- None of the blades and tools lock open
- Combo choke tube blade makes flathead screwdriver pretty worthless
-

Gerber Suspension
- Well made plier head, good shape, serrations, wire cutter
- Spring loaded pliers
- Better overall quality than comparable Chinese tools
- Much thicker/heavier than it needs to be
- Lattice type handles are a gimmick, allows dirt to get in
- Knife blade and saw blade are too short
-

Leatherman Crunch
- Most compact locking-plier multitool
- Strong and well made throughout
- Innovative blade lock-release mechanism
- Several step process to fold and unfold
- blades are too short
- Limited plier usage due to locking design

Schrade Tough Tool ST1
- Large, powerful design
- Laminated steel plier head
- Most blades lock
- large size when folded due to unusual design
- awkward hold in order to use knife blade
- too many strange knife-like blades instead of scissors
-
Anyone else have a tool (or several) that you would like to summarize? Please feel free to add them here.
Okay to post duplicates too, doesn't matter whether you agree or disagree with the summary someone else posted before you.
-
@J-sews said:
Anyone else have a tool (or several) that you would like to summarize? Please feel free to add them here.Okay to post duplicates too, doesn't matter whether you agree or disagree with the summary someone else posted before you.
This is an old post but it fits well: /topic/533
-
@supratentorial said:
This is an old post but it fits well: /topic/533Good stuff! I'd forgotten about that one. I can't hardly remember May, let alone December. :P
-
This is an old post but it fits well: /topic/533
Good stuff! I'd forgotten about that one. I can't hardly remember May, let alone December. :P
I remember May fondly... but I never touched December--I swear!!!
-
Leatherman Kick
-
Small, Light, Low-Profile: Can be carried in sheath or in a pocket, excellent minimal EDC
-
Zytel inserts are easier on the hand than PST design
-
Excellent tool quality: sharp blade out of the package, excellent wire cutters, and great drivers.
- Folding lanyard ring...could be removed to make room for a blade or tool..(awl, file, serrated blade..)
-Less tools than PST design due to zytel inserts
- joints were a little stiff out of the package...needed to add a little WD-40
Leatherman Super Tool
-
Excellent tool selection, very versatile
-
Built like a Tank
-
Tools lock
-
Heavy! Pulls down on the old pants when worn on a belt
-
Serrated blade would work better as a sheeps-foot, not a spear-point
-
must pull out another tool to unlock locking mechanism
Gerber MP400(?) blunt-nose (the older, hand-pinching one...)
-
One handed opening pliers
-
Excellent serrated blade
-
Excellent wire cutters
-
Stubby screwdrivers
-
Folding lanyard ring...(sense a pattern?)
-
blunt-nose pliers can't fit in tight spaces like needle-nose/combo plier heads
-
-
Victorinox Spirit
- Loaded with functions/tools
- Outside opening tools
- Best can opener I've tried so far
- Um... knife blade anyone?
- Not sold in mainstream stores :(
- Should I mention the knife blade again?
** Gerber MP400 Compact Sport**
- Sliding pliers are fun to play with
- Fiskars scissors (even though mine aren't labelled :( )
- I personally like the locking mechanism
- Short screwdrivers
- Cheap sheath
- Hard to use can opener
SOG ToolClip
- Strongest set of pliers I own
- Built like a tank
- Simple and useful design
- Big and Heavy
- Pliers sometimes open in my pocket
- Limited tools/implements
SOG Micro Toolclip
- Very strong small pliers
- Small saw works very well
- Small and easy to carry
- Strong blunt nose pliers aren't all that useful
- Pliers don't open far enough for some jobs
- Pliers sometimes open in pocket
-
Gerber Diesel

+Excellent evolution of Gerber's multiplier line, it's good to see the basic concept refined so well over so many years.
+Improved sliding mechanism leads to much less rattling and much more room between the handle ends when the pliers are open (no pinchy!).
+The implementation of Gerber's first integral wood saw, an excellent effort that works well and compliments the selection nicely.-The sliding out the front opening still limits the length of the short tools but they are longer than previous versions due to the reworked sliding mechanism.
-It is still a five-step process to use any of the tools in the handles.
-File is not ground for a metal saw, a real loss on so excellent a tool.Meyerco Paradox

+One of the few implementations of only a folding knife and pliers combination.
+Knife blade is AUS-8 and made in Seki City, Japan (knife city, the home of a large portion of many manufacturer's blades including much of Spyderco's low/mid level line-up).
+Depsite the original high MSRP the current "street price" of the Paradox is hovering between 5-15$.-No pocketclip.
-Folding pliers are workable but vary greatly between models and are of questionable quality overall.
-The tool is overly thick, mainly due to the massive FRN scales. -

Wenger SwissGrip
- Big super strong pliers
- Large knife and saw blades
- Two hex bit driver options
- Blunt nose pliers not as versatile as other multis
- Size and weight of tool are considerable
- Tool costs more than other more-capable tools
-
@Sparkey said:
Leatherman Super Tool-
Excellent tool selection, very versatile
-
Built like a Tank
-
Tools lock
-
Heavy! Pulls down on the old pants when worn on a belt
-
Serrated blade would work better as a sheeps-foot, not a spear-point
-
must pull out another tool to unlock locking mechanism
Now, that was the multi-tool that got me involved in the whole concept. Although the unlocking procedure was awkward, I did get used to it. As for the implements, they were all fine with me, including the spearpoint serrated blade. Worn in a nylon sheath horizontally on a belt, I found the weight almost unnoticeable. and have actually forgot it was there, on occasion. I replaced it with an ST200, which was okay, but overall, I preferred the Super Tool. I always thought with that model, Leatherman got it right.
These days, I carry a Core much of the time. Maybe I like it a little better than the Super Tools ;)
-
-
Don't get me wrong, I really like the super tool...I carried it for years before I got a job that didn't require having that many tools at your disposal...(I carry a kick now, b/c all I really need is some pliers and a screwdriver). I just needed to find 3 things that I considered to be minuses...fair and balanced and all that stuff... ;D
Oh, I've got some reviews of some swiss army stuff I'll post when I get time...
-

Schrade Tough Grip ST6
- Strong solid locking mechanism
- Based on framework of a "real" set of locking pliers
- Long needlenose jaws
- Tool itself and included sheath are too big for convenient carry
- Need to open up pliers to get at blades & drivers
- Screwdrivers are almost impossibly clumsy to operate
-
SOG Powerlock EOD
pro
-Good pliers. Compound leverage a definite plus-V-cutter is good for working with small rope/ fishing line/ etc.
-Tool is not overly large.
-Black finish is a plus. Helps inhibit rust. At least in my experience.
con
-Tools are too wimpy. Blade looks and feels like it was made from a cheap fillet knife.-Tool Clump. Go for the blade come out with several.
-Loosely constructed locks for blades. Might as well use a slipjoint.
Leatherman Wave
pro
-Well made solid tool.-One Hand opening of main blades.
-Locks are stronger than most designs.
con
-Rattles like a babys toy
-ho hum sheaths leave a bit to be desired
-Non premium steel blades.
Swisstool Spirit
pro
-Built like a swiss watch very precise
-good lockup and smooth action.
-shiny and well polished. resists corrosion
con
-Unless you have the "s" model the blade design leaves a bit to be desired.
-Blades are not one of the wondersteels
-no one hand opening action of the blades.
Gerber Multiplier
pro
-one hand opening blade
-remgrit saw will cut through anything
-spring loaded pliers are really cool
con
-cheap construction probally of chineese origin
-weak blade too small and thin
-Rubber insert in handles falls off above 80 degrees F.
-

CRKT Zilla-Tool
- Quite ergonomic; fits hand very well
- Strong and solid construction throughout
- "Big three" functions: Pliers, knife, bit driver
- Extremely long length overall
- Too long for using attached pocket clip. (No sheath included)
- Extra care must be taken to avoid corrosion
-
CRKT Zilla-Tool
- Quite ergonomic; fits hand very well
- Strong and solid construction throughout
- "Big three" functions: Pliers, knife, bit driver
- Extremely long length overall
- Too long for using attached pocket clip. (No sheath included)
- Extra care must be taken to avoid corrosion
One negative,,,,,,liner lock does not always positively engage blade
-
1,leatherman TTI
pros
-perfect one hand opening S30V blade and diamond file,no other multitools can match.
-stronger plier head
-efficient wood sawcons
-short phillips screwdriver only used in limited situation >:(
-useless micro screwdriver
-small scissors
-not all tools open from the outside
-(when closed)vertical plier head support part,easily bend
-hard leather sheath2,swisstool spirit
pros
-perfect design,compact size,light weight
-long screwdriver and big cap lifter(my favourite) ::)
-will not rust
-very good lock system
-all tools open from the outside
-(when closed)Horizontal plier head support part,good design
-soft leather sheathcons
-crap knife
-no one hand opening
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login