Your thoughts on multitool X
-
@J-sews said:
Anyone else have a tool (or several) that you would like to summarize? Please feel free to add them here.Okay to post duplicates too, doesn't matter whether you agree or disagree with the summary someone else posted before you.
This is an old post but it fits well: /topic/533
-
@supratentorial said:
This is an old post but it fits well: /topic/533Good stuff! I'd forgotten about that one. I can't hardly remember May, let alone December. :P
-
This is an old post but it fits well: /topic/533
Good stuff! I'd forgotten about that one. I can't hardly remember May, let alone December. :P
I remember May fondly... but I never touched December--I swear!!!
-
Leatherman Kick
-
Small, Light, Low-Profile: Can be carried in sheath or in a pocket, excellent minimal EDC
-
Zytel inserts are easier on the hand than PST design
-
Excellent tool quality: sharp blade out of the package, excellent wire cutters, and great drivers.
- Folding lanyard ring...could be removed to make room for a blade or tool..(awl, file, serrated blade..)
-Less tools than PST design due to zytel inserts
- joints were a little stiff out of the package...needed to add a little WD-40
Leatherman Super Tool
-
Excellent tool selection, very versatile
-
Built like a Tank
-
Tools lock
-
Heavy! Pulls down on the old pants when worn on a belt
-
Serrated blade would work better as a sheeps-foot, not a spear-point
-
must pull out another tool to unlock locking mechanism
Gerber MP400(?) blunt-nose (the older, hand-pinching one...)
-
One handed opening pliers
-
Excellent serrated blade
-
Excellent wire cutters
-
Stubby screwdrivers
-
Folding lanyard ring...(sense a pattern?)
-
blunt-nose pliers can't fit in tight spaces like needle-nose/combo plier heads
-
-
Victorinox Spirit
- Loaded with functions/tools
- Outside opening tools
- Best can opener I've tried so far
- Um... knife blade anyone?
- Not sold in mainstream stores :(
- Should I mention the knife blade again?
** Gerber MP400 Compact Sport**
- Sliding pliers are fun to play with
- Fiskars scissors (even though mine aren't labelled :( )
- I personally like the locking mechanism
- Short screwdrivers
- Cheap sheath
- Hard to use can opener
SOG ToolClip
- Strongest set of pliers I own
- Built like a tank
- Simple and useful design
- Big and Heavy
- Pliers sometimes open in my pocket
- Limited tools/implements
SOG Micro Toolclip
- Very strong small pliers
- Small saw works very well
- Small and easy to carry
- Strong blunt nose pliers aren't all that useful
- Pliers don't open far enough for some jobs
- Pliers sometimes open in pocket
-
Gerber Diesel

+Excellent evolution of Gerber's multiplier line, it's good to see the basic concept refined so well over so many years.
+Improved sliding mechanism leads to much less rattling and much more room between the handle ends when the pliers are open (no pinchy!).
+The implementation of Gerber's first integral wood saw, an excellent effort that works well and compliments the selection nicely.-The sliding out the front opening still limits the length of the short tools but they are longer than previous versions due to the reworked sliding mechanism.
-It is still a five-step process to use any of the tools in the handles.
-File is not ground for a metal saw, a real loss on so excellent a tool.Meyerco Paradox

+One of the few implementations of only a folding knife and pliers combination.
+Knife blade is AUS-8 and made in Seki City, Japan (knife city, the home of a large portion of many manufacturer's blades including much of Spyderco's low/mid level line-up).
+Depsite the original high MSRP the current "street price" of the Paradox is hovering between 5-15$.-No pocketclip.
-Folding pliers are workable but vary greatly between models and are of questionable quality overall.
-The tool is overly thick, mainly due to the massive FRN scales. -

Wenger SwissGrip
- Big super strong pliers
- Large knife and saw blades
- Two hex bit driver options
- Blunt nose pliers not as versatile as other multis
- Size and weight of tool are considerable
- Tool costs more than other more-capable tools
-
@Sparkey said:
Leatherman Super Tool-
Excellent tool selection, very versatile
-
Built like a Tank
-
Tools lock
-
Heavy! Pulls down on the old pants when worn on a belt
-
Serrated blade would work better as a sheeps-foot, not a spear-point
-
must pull out another tool to unlock locking mechanism
Now, that was the multi-tool that got me involved in the whole concept. Although the unlocking procedure was awkward, I did get used to it. As for the implements, they were all fine with me, including the spearpoint serrated blade. Worn in a nylon sheath horizontally on a belt, I found the weight almost unnoticeable. and have actually forgot it was there, on occasion. I replaced it with an ST200, which was okay, but overall, I preferred the Super Tool. I always thought with that model, Leatherman got it right.
These days, I carry a Core much of the time. Maybe I like it a little better than the Super Tools ;)
-
-
Don't get me wrong, I really like the super tool...I carried it for years before I got a job that didn't require having that many tools at your disposal...(I carry a kick now, b/c all I really need is some pliers and a screwdriver). I just needed to find 3 things that I considered to be minuses...fair and balanced and all that stuff... ;D
Oh, I've got some reviews of some swiss army stuff I'll post when I get time...
-

Schrade Tough Grip ST6
- Strong solid locking mechanism
- Based on framework of a "real" set of locking pliers
- Long needlenose jaws
- Tool itself and included sheath are too big for convenient carry
- Need to open up pliers to get at blades & drivers
- Screwdrivers are almost impossibly clumsy to operate
-
SOG Powerlock EOD
pro
-Good pliers. Compound leverage a definite plus-V-cutter is good for working with small rope/ fishing line/ etc.
-Tool is not overly large.
-Black finish is a plus. Helps inhibit rust. At least in my experience.
con
-Tools are too wimpy. Blade looks and feels like it was made from a cheap fillet knife.-Tool Clump. Go for the blade come out with several.
-Loosely constructed locks for blades. Might as well use a slipjoint.
Leatherman Wave
pro
-Well made solid tool.-One Hand opening of main blades.
-Locks are stronger than most designs.
con
-Rattles like a babys toy
-ho hum sheaths leave a bit to be desired
-Non premium steel blades.
Swisstool Spirit
pro
-Built like a swiss watch very precise
-good lockup and smooth action.
-shiny and well polished. resists corrosion
con
-Unless you have the "s" model the blade design leaves a bit to be desired.
-Blades are not one of the wondersteels
-no one hand opening action of the blades.
Gerber Multiplier
pro
-one hand opening blade
-remgrit saw will cut through anything
-spring loaded pliers are really cool
con
-cheap construction probally of chineese origin
-weak blade too small and thin
-Rubber insert in handles falls off above 80 degrees F.
-

CRKT Zilla-Tool
- Quite ergonomic; fits hand very well
- Strong and solid construction throughout
- "Big three" functions: Pliers, knife, bit driver
- Extremely long length overall
- Too long for using attached pocket clip. (No sheath included)
- Extra care must be taken to avoid corrosion
-
CRKT Zilla-Tool
- Quite ergonomic; fits hand very well
- Strong and solid construction throughout
- "Big three" functions: Pliers, knife, bit driver
- Extremely long length overall
- Too long for using attached pocket clip. (No sheath included)
- Extra care must be taken to avoid corrosion
One negative,,,,,,liner lock does not always positively engage blade
-
1,leatherman TTI
pros
-perfect one hand opening S30V blade and diamond file,no other multitools can match.
-stronger plier head
-efficient wood sawcons
-short phillips screwdriver only used in limited situation >:(
-useless micro screwdriver
-small scissors
-not all tools open from the outside
-(when closed)vertical plier head support part,easily bend
-hard leather sheath2,swisstool spirit
pros
-perfect design,compact size,light weight
-long screwdriver and big cap lifter(my favourite) ::)
-will not rust
-very good lock system
-all tools open from the outside
-(when closed)Horizontal plier head support part,good design
-soft leather sheathcons
-crap knife
-no one hand opening -
Leatherman Super Tool
-
Excellent tool selection, very versatile
-
Built like a Tank
-
Tools lock
-
Heavy! Pulls down on the old pants when worn on a belt
-
Serrated blade would work better as a sheeps-foot, not a spear-point
-
must pull out another tool to unlock locking mechanism
+1 vote for super tool!
i got the first version and the later with thumb roller locking system,and im keen to older one,although its worn and all.i filed the blade into middlecoarse serration about half the length of the blade.
have it on my tool box on car always.Now, that was the multi-tool that got me involved in the whole concept. Although the unlocking procedure was awkward, I did get used to it. As for the implements, they were all fine with me, including the spearpoint serrated blade. Worn in a nylon sheath horizontally on a belt, I found the weight almost unnoticeable. and have actually forgot it was there, on occasion. I replaced it with an ST200, which was okay, but overall, I preferred the Super Tool. I always thought with that model, Leatherman got it right.
These days, I carry a Core much of the time. Maybe I like it a little better than the Super Tools ;)
-
-
Let's see, what do I own...
Leatherman Charge TTi
Pros:
Outside opening blades, diamond file, and wood saw
Ti scales make for good gripping (IMO)
Bit driver (variety)Cons:
Scissors are kinda wimpy
No awl
Inclusion of crimper reduces usable plier real estateSOG Powerlock 1.0
Pros:
Compound gear thingy
Customizable
Great fit and finish
ComfortableCons:
No outside opening tools
Have yet to find a use for the 1/4 in. adaptor
Lock doesn't work well on 100% of the tools
Slippery when wetSwiss Tool Spirit
Pros:
Comfortable, ergonomic handles
Spectacular complement of tools
All tools outside opening
A+ fit and finish
Secure locking mechanismCons:
Almost feels like I'm going to break it, even though everything I've read says I won't
Slippery when wet
Butter-knife only (it is useful, but no pointed blade)
Scissors not as useful as those on smaller SAksLeatherman Juice CS4:
Pros:
Pocketable
Decent fit and finish
Great scissorsCons:
Have to fold out some of the tools in order to get to/put away/use others (saw/awl; corkscrew/bottle opener)
Flimsy saw
Size belies its weightLeatherman Micra:
Pros:
Grade A Bottle opener and mini screwdriver
Scissors some of the toughest on any multitool or any size
Small sizeCons:
Tweezers attached to the handles, not very useful
Tools don't open on the outsideLeatherman Squirt S4
Pros:
Same tool set as Micra.
Removable tweezers stored in handle, a la SAK
Outside openingCons:
Bottle opener sucks
So do the drivers -
Wenger NewRangers with Pliers (70, 73, 74, 75, Touring 174, Alinghi 176, 177) or Scissors (71, 172)
Pros:
4" locking blade (one-handed on Alinghi 176). Excellent lock/release mechanism.
Choice of plain or partly-serrated blades (172, 174, 176, 177 are partly serrated).
Full-size Pliers or scissors fold completely into the knife body.
4" metal file/saw (70 only).
4" wood saw (172).
Locking screwdrivers (73, 75, Touring 174, Alinghi 176, 177)
Hooked secondary blade (73).
Choice of plain or partly-serrated blades. (172, 174, 176, and 177 are partly serrated).
Bit driver that takes standard 1/4" hex scewdriver bits (174 only).
Marlinspike/4" ruler (Alinghi)Cons:
Can't get all these great tools on one knife. If you could it would be really big.
Probably contravenes the knife laws in some locales.
No tweezers.Thread with pictures here.
-

SOG Powerlock 2.0 EODPros
-New "piano lock" eliminates tool clump.
-Gear covers are great at protecting your hands.
-SOG-Compound leverage... duh.Cons
-Piano lock is a little cumbersome.
-Innermost components are a bear to get out with your nail.
-Almost as big a hassle as the Gerber MP series to get interior components into play.Overall, awesome tool for hard use. Mine's already been thrown into the fray in a U-pull-it junk yard looking for stuff for my Eclipse. I also am tripping over the customizable tool load-out on these tools.

STik -
I have an rs but wouldn't mind one of these.
-

I was gifted this bucktool several years ago.
I carried this for several years. it was my first multi tool. it had locking blades, and a unique opening for the pliers.what I didn't like was when opened up to use the pliers, the handles didn't match, they were always off center. this caused malfunctions when turning things clockwise to twisting back and forth.
the handles were nice and smooth, no rough edges. the locking mech. was located in good spot no problems.I did break one side of the lock.. this caused all the tools on that side to flop around, in and out. in my opinion it rendered the tool unsafe, so therefore unusable.
off to the fishing box it went..I think I would buy another one just because it's out of production now, it did serve me well for a long time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login