The Great Multi-Tool Restoration Thread!!!
-
Dave, what grit sandpaper? Thanks
-
I'm using 3 in 1 PTFE oil at the moment, it seems to work well and doesn't get all cruddy like the regular stuff.
LM123 - it's in the picture ;) (1500 grit)
-
Maybe I should go to bed! :D
-
Very nice PST Dave :o looks brand new
I like a nice and shiny PST
Thanks for the rundown of what you do to 1 I may start tracking these beauties down and cleaning them up myself
I will use that as a reference 
-
Let's keep this thread alive.

-
OK - Let's!
Neil (NKB) sent me a Kershaw A100 in a trade, and it arrived today. Neil had warned me that it was a bit grubby, so it was a planned clean-up job!
Here it is before:


During:

...and after!


-
That is looking SO much better. Top job

Neil
-
Nice work. Especially on that saw blade!

-
Great job, Dave!

-
Great job Dave another top notch clean up

You are getting very good at that
:D -
@MultiMat said:
Nice job again Dave, I really like my A100. Did you remove the main blade Dave & have to tackle that tiny nut
The main blade is dead easy to remove. The little nut that you refer to is actually welded in place, so you only need to remove the external one (for which I used the socket you can just see in one of the pics).
Before I realised that, I was intending to grip the internal nut with a Squirt P4 or Clutch - didn't need to in the end though.
-
Nice job again Dave, I really like my A100. Did you remove the main blade Dave & have to tackle that tiny nut

The main blade is dead easy to remove. The little nut that you refer to is actually welded in place, so you only need to remove the external one (for which I used the socket you can just see in one of the pics).
Before I realised that, I was intending to grip the internal nut with a Squirt P4 or Clutch - didn't need to in the end though.
No weld I my one ya lucky dog , I tried the Squirt & Crunch & not enough room :ahhh
-
Nice job again Dave, I really like my A100. Did you remove the main blade Dave & have to tackle that tiny nut

The main blade is dead easy to remove. The little nut that you refer to is actually welded in place, so you only need to remove the external one (for which I used the socket you can just see in one of the pics).
Before I realised that, I was intending to grip the internal nut with a Squirt P4 or Clutch - didn't need to in the end though.
No weld I my one ya lucky dog , I tried the Squirt & Crunch & not enough room :ahhh
Are we talking about the same thing?

-
Fu#k me Dave & your BIG red arrow (you should have been a teacher) . You just made me leave my cider & corn chips to go too my treasure chest. Yes the P4 can sort of grip the nut if you tilt your head, bite your lip & say a prayer. But not well enough too hold in place.
BTW I think your A100 not only has a bloody weld but clearly it is bigger than my nut
:D :D :D :D :D.
I could of said your A100 has got BIGGER NUTS but that would be un- Australian :P :D :D :D -
Did you like the way I used a pink Squirt, 'cos you're being a big girl about it ;)
:D
Get into it. You can't make an omelette without breaking eggs, etc

-
In case Ben reads this:

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
