The Great Multi-Tool Restoration Thread!!!
-
Well Dave, you've inspired me to get after an old A100 I've got. Actually it is one with Craftsman markings, but exactly the same as the Kershaw in all other respects. Nothing horribly damaged on it, just plenty of dings and scratches and gunk.
Here is a picture of it gutted. With any luck I'll have it reassembled this evening.

-
@J-sews said:
Well Dave, you've inspired me to get after an old A100 I've got. Actually it is one with Craftsman markings, but exactly the same as the Kershaw in all other respects. Nothing horribly damaged on it, just plenty of dings and scratches and gunk.Here is a picture of it gutted. With any luck I'll have it reassembled this evening.

I take it your not drinking tonight then :D Imagine what it would be like if I put it back together :o
Dunc
-
Bob. The black "block" on the left of the picture - about half way up - is that the thread that the adjusting screw fits into? If so, is it plastic on yours? Mine is metal - probably aluminium.
-
@DaveK said:
Bob. The black "block" on the left of the picture - about half way up - is that the thread that the adjusting screw fits into? If so, is it plastic on yours? Mine is metal - probably aluminium.That is indeed the adjusting screw block. Mine is steel. It is discolored though, as if it has been heat treated?
I'd take a close up picture but it is already reattached. :-\
-
Done. 8) (bottom one in the pictures)


The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
-
So Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
-
@J-sews said:
Done. 8) (bottom one in the pictures)
...The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
Nicely done sir
Good tip about the bead blasting. In the past I've not got on well with little wire wheels, they seemed to shed at an alarming rate often managing to embed them selves in my hands and arms in the process ::) I jest not. I suspect purchasing a genuine dremmel one might be in order rather than the cheap knock offs.Neil
-
Done. 8) (bottom one in the pictures)
...The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
Nicely done sir
Good tip about the bead blasting. In the past I've not got on well with little wire wheels, they seemed to shed at an alarming rate often managing to embed them selves in my hands and arms in the process ::) I jest not. I suspect purchasing a genuine dremmel one might be in order rather than the cheap knock offs.Neil
Ahh, good point. Always wear glasses when using a wire wheel.

-
So Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
Oh dear... :o
-
@J-sews said:
Done. 8) (bottom one in the pictures)

The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
That looks good as new Bob. You do not need to get a new Craftsman now
:DSo Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
Neil you are a BAD man :o :D :D
-
Driven what though?
-
Super job Bob I wouldn't have been able to tell which 1 you claned up after you finished :o 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

