The Great Multi-Tool Restoration Thread!!!
-
So Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
-
@J-sews said:
Done. 8) (bottom one in the pictures)
...The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
Nicely done sir
Good tip about the bead blasting. In the past I've not got on well with little wire wheels, they seemed to shed at an alarming rate often managing to embed them selves in my hands and arms in the process ::) I jest not. I suspect purchasing a genuine dremmel one might be in order rather than the cheap knock offs.Neil
-
Done. 8) (bottom one in the pictures)
...The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
Nicely done sir
Good tip about the bead blasting. In the past I've not got on well with little wire wheels, they seemed to shed at an alarming rate often managing to embed them selves in my hands and arms in the process ::) I jest not. I suspect purchasing a genuine dremmel one might be in order rather than the cheap knock offs.Neil
Ahh, good point. Always wear glasses when using a wire wheel.

-
So Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
Oh dear... :o
-
@J-sews said:
Done. 8) (bottom one in the pictures)

The screwdrivers were all boogered up. I reshaped them with a diamond file. Touched up the knife blade and re-buffed it with the dremel. Also used a little wire wheel attachment on the dremel to remove all the rust speckles. It worked surprisingly well. On tools with a bead blast finish (the A100, many Gerber tools, Leatherman SideClip, etc) the rust speckles get started rather easily. Removing them with steel wool or scotch brite leaves a spot that never matches the factory finish. The little dremel wire wheel is the answer to that problem. :)
That looks good as new Bob. You do not need to get a new Craftsman now
:DSo Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
Neil you are a BAD man :o :D :D
-
Driven what though?
-
Super job Bob I wouldn't have been able to tell which 1 you claned up after you finished :o 
-
So Dave what is the best thing for cleaning bird poo out of multitools ?? Or should I ask Ben :D :D :D
No experience of that yet (there would be a big row if that happened >:( ), but I have had to get a lot of seed out of my bloody keyboard. >:(
:o :-[ :ahhh
Oh wait, we're talking about budgie seed aren't we. My bad ;)
Neil
Eww!
-
There wasn't much I could do for this tired electrician. I cleaned it up with soap and water, dryed it with dust remover, and gave it a good oiling with Break Free. This baby is headed for retirement, but at least he will have some famous friends to hang out with. :D

-
My Sunday afternoon project:



Surely the translucent plastic-covered Micra's must rank as one of Leatherman's dumbest ideas ever. :P Moisture, dirt, and pocket debris just naturaaly collect beneath the plastic cover, and there's no way for a person to clean it out. Trapped up against the metal like that, it soon starts to rust. And worst of all, the see-thru cover showcases every rust and dirt spot for the whole world to see. ::) At least on the aluminum-clad models a person can't see the nastiness that is going on underneath. :P
First step in my restoration process was to rip the whole thing to bits. I'm generally quite good at that. :) Then comes the cleaning and reassembly stage. We'll have to see how that portion goes..... :-\
-
Yup - a pretty dumb idea I think.
I've done a couple of these Bob, and it never ceases to amaze me how many parts a Micra is made up of :D
-
-
Yup - a pretty dumb idea I think.
I've done a couple of these Bob, and it never ceases to amaze me how many parts a Micra is made up of :D
Agreed! 28 seperate parts by my count. Each one precisely cut and polished. It's a wonder they are able to sell them so cheaply.

and are you counting the scissor head as 1 or 3 separate pieces ::) :D
I bet it will shine when you finish Bob

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

