Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

First mod done. I present...

Scheduled Pinned Locked Moved The Mod Squad
44 Posts 1 Posters 9.7k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Mr. WhippyM
    Mr. WhippyM
    Mr. Whippy
    Global Moderators
    wrote on last edited by
    #1

    The Ice Climber.

    Here it is next to a 91mm Tinker

    The tool list:
    Small blade
    Metal file and metal saw
    Bit driver

    It turns out that the file is narrower than the main blade by approximately the width of a standard liner. Because of this, I was able to pair it with the small blade by offsetting the spacers of the two tools, thereby saving one layer.



    The scales are from an old Aluminum Land Rover plate (which I happened to have in the scrap pile.)

    I'm gonna tie a short cord to the keyring and clip it to my harness with a carabiner. This is designed to be a harness tool. It has the three most often needed tools on it, with the least weight possible (I think).

    It turns out that older main blade springs are more arced than the newer main blade springs and actually work better, giving the file and small blade better snap than the newer spring.

    1 Reply Last reply
    0
    • Poncho65P
      Poncho65P
      Poncho65
      Global Moderators
      wrote on last edited by
      #2

      😮 Nice looking mod Mr. B w :tu: really looks like it would be very useful as well :cheers:

      1 Reply Last reply
      0
      • Poncho65P
        Poncho65P
        Poncho65
        Global Moderators
        wrote on last edited by
        #3

        Owe and I love the scales nice touch 😄

        1 Reply Last reply
        0
        • Mike, Lord of the Spammers!M
          Mike, Lord of the Spammers!M
          Mike, Lord of the Spammers!
          wrote on last edited by
          #4

          Nice one mate :tu:

          1 Reply Last reply
          0
          • GarethG
            GarethG
            Gareth
            Admin Team
            wrote on last edited by
            #5

            Excellent mate. Good job on getting the file and small blade to sit together. :tu:

            1 Reply Last reply
            0
            • BennerB
              BennerB
              Benner
              wrote on last edited by
              #6

              Nice one! 🙂

              1 Reply Last reply
              0
              • J-sewsJ
                J-sewsJ
                J-sews
                Admin Team
                wrote on last edited by
                #7

                That's pretty amazing how the LAND and ROVER fit just perfectly within the profile of the scales. 🙂 Good show sir! :tu:

                1 Reply Last reply
                0
                • S
                  S
                  Sean
                  wrote on last edited by
                  #8

                  Absolutely a fine piece! A really nice keepsake and hopefully a very functional, useable tool for you as well. I would be proud as you must be. Unfortunately I don't think I have the skill to make my own tool. Well done.

                  sean

                  1 Reply Last reply
                  0
                  • N
                    N
                    Neil
                    wrote on last edited by
                    #9

                    Love the scales 😄

                    What have you got on the back of the blade layer?

                    Neil

                    1 Reply Last reply
                    0
                    • DaveKD
                      DaveKD
                      DaveK
                      wrote on last edited by
                      #10

                      What a great mod. I love the scales!

                      1 Reply Last reply
                      0
                      • Mr. WhippyM
                        Mr. WhippyM
                        Mr. Whippy
                        Global Moderators
                        wrote on last edited by
                        #11

                        @NKB said:
                        Love the scales 😄

                        What have you got on the back of the blade layer?

                        Neil

                        I left the back open--no tool. I drilled the hole for the keyring into that space. The blade layer seems to work well without the back tool, so I left it out.

                        1 Reply Last reply
                        0
                        • Don PabloD
                          Don PabloD
                          Don Pablo
                          wrote on last edited by
                          #12

                          Bumped and bookmarked.:hatsoff:
                          Even though the pics are gone, it's great to know that you can pair the file(and presumably the woodsaw? :think: ) with the combo tool, or small blade, or inline awl. :climber:

                          1 Reply Last reply
                          0
                          • Don PabloD
                            Don PabloD
                            Don Pablo
                            wrote on last edited by
                            #13

                            Hmm, is the wood saw the same as the metal file, in thickness at the tip and tang?
                            I want to do this mod with the wood saw in place of the metal file.

                            1 Reply Last reply
                            0
                            • King_GorillaK
                              King_GorillaK
                              King_Gorilla
                              wrote on last edited by
                              #14

                              😢 cant see the pictures :ahhh

                              1 Reply Last reply
                              0
                              • Don PabloD
                                Don PabloD
                                Don Pablo
                                wrote on last edited by
                                #15

                                Photobucket ate them. :facepalm:

                                I'll try this out myself in a few weeks though, and will post pictures. :cheers:

                                1 Reply Last reply
                                0
                                • Don PabloD
                                  Don PabloD
                                  Don Pablo
                                  wrote on last edited by
                                  #16

                                  Ok, I've tried it a few ways.
                                  First off, keep in mind that the wood saw has lots of big teeth that could catch on a tool or liner if it doesn't have enough space. So what doesn't work well for the saw may work with the metal file. Anyone with a metal file care to experiment and post pics? :pok: 😉
                                  Second, I put the Inline Phillips/Mag layer beside the corkscrew layer. Because the inline phillips head sticks out a little bit to the sides, over the liners, its basically a worst case scenario for putting the wood saw beside. If a wood saw configuration works with the inline phillips beside, it should work with anything else. :tu:
                                  Third, if you see/think of a configuration I missed, tell me! :cheers:
                                  Fourth, nevermind how high the saw tip is. I'm not going to grind at the spacers until I've got something that works well. 😉

                                  These are ranked from worst to best, in my opinion.

                                  Spoiler:
                                  First up, is putting the small blade and spacer in the place of the main blade, with the saw and a spacer where the small blade normally goes.

                                  Bad, because the small blade nick is inaccessible. :facepalm:
                                  You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips.
                                  Also an old style liner without the stamped indent to get the small blade to fit.
                                  Also, the spacer by the saw is too thick, It needs to be 0.6mm or so, and its 0.9-1mm. 😕

                                  Spoiler:
                                  Next is the small blade and spacer in its usual place, with wood saw in place of main blade.

                                  Not very good, because the saw will catch on the small blade unless you guide it in. But has potential.
                                  You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips, also one liner and the small blade spacer will have to be shaped to provide a proper rest for the saw tip.
                                  Also, the saw spacer here in this case is too thick. Its about 0.4mm thick, and needs to be 0.2mm thick. That can be achieved by sanding. :cheers:
                                  If you used the metal saw, you might have less/no problems with teeth catching the small blade. Needs more investigation by someone with a metal saw. :cheers:

                                  1 Reply Last reply
                                  0
                                  • hiraethusH
                                    hiraethusH
                                    hiraethus
                                    Admin Team
                                    wrote on last edited by
                                    #17

                                    @King_Gorilla said:
                                    😢 cant see the pictures :ahhh

                                    Right click, select open image in new tab (or whatever). Photosmurfet page for the image opens.

                                    1 Reply Last reply
                                    0
                                    • hiraethusH
                                      hiraethusH
                                      hiraethus
                                      Admin Team
                                      wrote on last edited by
                                      #18

                                      @Pablo O'Brien said:
                                      Ok, I've tried it a few ways.
                                      First off, keep in mind that the wood saw has lots of big teeth that could catch on a tool or liner if it doesn't have enough space. So what doesn't work well for the saw may work with the metal file. Anyone with a metal file care to experiment and post pics? :pok: 😉
                                      Second, I put the Inline Phillips/Mag layer beside the corkscrew layer. Because the inline phillips head sticks out a little bit to the sides, over the liners, its basically a worst case scenario for putting the wood saw beside. If a wood saw configuration works with the inline phillips beside, it should work with anything else. :tu:
                                      Third, if you see/think of a configuration I missed, tell me! :cheers:
                                      Fourth, nevermind how high the saw tip is. I'm not going to grind at the spacers until I've got something that works well. 😉

                                      These are ranked from worst to best, in my opinion.

                                      Spoiler:
                                      First up, is putting the small blade and spacer in the place of the main blade, with the saw and a spacer where the small blade normally goes.

                                      Bad, because the small blade nick is inaccessible. :facepalm:
                                      You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips.
                                      Also an old style liner without the stamped indent to get the small blade to fit.
                                      Also, the spacer by the saw is too thick, It needs to be 0.6mm or so, and its 0.9-1mm. 😕

                                      Spoiler:
                                      Next is the small blade and spacer in its usual place, with wood saw in place of main blade.

                                      Not very good, because the saw will catch on the small blade unless you guide it in. But has potential.
                                      You'll need a double liner between the corkscrew layer and mag layer to stop the saw catching the phillips, also one liner and the small blade spacer will have to be shaped to provide a proper rest for the saw tip.
                                      Also, the saw spacer here in this case is too thick. Its about 0.4mm thick, and needs to be 0.2mm thick. That can be achieved by sanding. :cheers:
                                      If you used the metal saw, you might have less/no problems with teeth catching the small blade. Needs more investigation by someone with a metal saw. :cheers:

                                      Excellent work. :tu: I've been thinking about doing this for a while now (with the metal file) but never got round to it. Definitely worth a try.

                                      1 Reply Last reply
                                      0
                                      • Don PabloD
                                        Don PabloD
                                        Don Pablo
                                        wrote on last edited by Don Pablo
                                        #19

                                        Overall, when it comes to putting the wood saw in the corkscrew layer, I'd rather ditch the small blade and take up the extra space with washers. :think:

                                        Like this:

                                        Spoiler:

                                        The saw spacer is too thick. Its 0.9-1mm, and needs to be 0.6mm

                                        Or like this:

                                        Spoiler:

                                        The tweezer/mag end needs an additional 0.4mm spacer for everything to fit right.
                                        And the saw spacer needs to be sanded down to half the thickness.

                                        The latter is my favorite, and its basically the same idea as what Jaya_Man did, only with small blade spacers instead of a rest made from a scissor spring:
                                        </topic/68332

                                        1 Reply Last reply
                                        0
                                        • tommywpT
                                          tommywpT
                                          tommywp
                                          wrote on last edited by
                                          #20

                                          Nice try Pablo....would have been sweet to get the small blade on there.

                                          Big fan of your recent posts about mod attempts with with all the pics taken along the way. Thinking about attempt my first mod and they're definitely making me feel like I have a better grasp going in.

                                          :tu:

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World