kamakiri's Former Lurker / New Member Intro (long read)
-
'Yeoman Special' was the initial project name...but maybe Reverse Yeoman makes more sense? Small Blade Yeoman? Kamakiri Yeoman?
:ahhh too many options...
Hmm

Its very nice though, whatever it may be called

Thanks CsB :) ...It's also a Left-Hand Yeoman. :D 
And checking the wiki on Yeomen, theres a pic of two with the scissor and mag/phillips layer switched. Might have worked better for this one too. I don't use hooks much, but I like it better in the middle for kickstand use.
-
'Yeoman Special' was the initial project name...but maybe Reverse Yeoman makes more sense? Small Blade Yeoman? Kamakiri Yeoman?
:ahhh too many options...
Hmm

Its very nice though, whatever it may be called

Thanks CsB :) ...It's also a Left-Hand Yeoman. :D 
And checking the wiki on Yeomen, theres a pic of two with the scissor and mag/phillips layer switched. Might have worked better for this one too. I don't use hooks much, but I like it better in the middle for kickstand use.
Kickstand duty and usage is a plus!

-
This is a pleasure to watch

-
And always better used that way without either keyring style in the way. I gotta make one with a hook and shackle, because the it can be flipped out of the way!
This is a pleasure to watch

Agreed!

Thanks gentlemen, and good to meet you Sir Jones!

I was thinking about making it a Woodsman or Modeler version, but indecision on that and what donor knife to pull got in the way of project timing. Next one is probably going to be a kamakiri Troubleshooter.
-
+1

-

woodsman sounds great! -
January Challenge is over...back to work:





Liners were too dirty and oxidized to leave alone. Re-brushed them all before polishing all the visible surfaces and edges.
Gonna go through all the tools too, so assembly might not happen until next week. Only tool done was the Metal Saw and that's not going to get extra polish.
-
Great mod the reverse kamakiri style yeoman thingy

I was wondering, does the combo tool get in contact with the scissors?
And do you think the mag/philips layer could be better put into the middle position?Excellent thread btw

Looking forward to the next one

-
Looking good

-
@MTMatt said:
Great mod the reverse kamakiri style yeoman thingy
I was wondering, does the combo tool get in contact with the scissors?
And do you think the mag/philips layer could be better put into the middle position?Excellent thread btw

Looking forward to the next one

Thanks, MTMatt!There's zero contact for the combo and scissor. The combo tool does sit into the liner space, but have to push pretty hard to make them touch. I thought about the mag layer in the middle like the Swiss Bianco? (not sure on that), but I think the older/longer Phillips would make contact with the combo where the newer short style wouldn't (I suppose). If I recall correctly, the original Yeoman had the same liner contact issue. I figured I could live with it.
Not sure if I mentioned it earlier, the main reason for the reverse is to have the short side spring and higher compression to resist movement better when using it as a pry tool. I'd say the force to close is nearly double from the normal position. I know most would not like the small blade, but I wanted this to be proof of concept to put a Pruner blade instead.
This one is 'nothing special' technically speaking. I've got some other more interesting stuff lined up for 'proofing'.

Thank you Sir W!
I hope this one isn't too boring!
I also gotta get back to some of the content I intended for the original post. :ahhh But new mods are more fun.

-More of the story for my '84.5 Champion
-The bee story
- Marlboro stuff and mods
-Champions
-Early naming conventions (Particularly Craftsman and 136xxx relatives)
-More Hoffritz and Timeline data
-Ranger Production Timeline
-Camping Inlay Timeline
-Vintage Catalog version dating.
And I'm probably forgetting something at the moment. ::)

-
Beautiful work with the Yeoman!

I'd just call it Yeokiri and be done with it! ::) :D
-
@AlephZero said:
Beautiful work with the Yeoman!
I'd just call it Yeokiri and be done with it! ::) :D
Thanks, AlephZero! I'm just not that clever! 
-
This is definitely not boring kamakiri keep up the good work

-
Most welcome!

-
Very entertaining

-
<u>Project: 'Troublemaker'</u>
Had some time to finish my Troubleshooter Lite + Pen. Waffled a bit about adding a Wood Saw and using the Corkscrew instead for this temporary/test build and making it a Handyman Lite Plus, but it would add time to get the Saw from the fodder box. And adding another Layer would make it close to Champ size. This way it would still be about a half layer thinner than a Champ and about a full layer thinner than a CT Lite but have at least 1 saw. Intent is to have a Magnifier in place of the In-line Phillips for the 'final' build.
Misc polishing:

Don't need this:

'free' pins during assembly:

Layer 1 Openers/Awl:

Layer2 Lite (would add magnifier here on permanent build instead of phillips):


Layer 3 Pliers (FYI - If I put the scissor here it could save a 1mm spacer):

Layer 4 Scissor/Hook:

Layer 5 Saw/Chisel:

Layer 6 Blades and back Phillips:

Top view:

Measure and trim pins:

Hammer Time:





Pressed on original/modified for pen scales:




@CallsignBadger said:
Very entertaining

Thanks, CsB...I hope this one was, even if a little. Was glad for the knife time today and to finish this one. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login