A better Leatherman, Tim Leatherman?
-

Great readHas the Bear patent expired? Maybe LM could release a PST with reverse handles.
-
Probably 14 years, so expired 2010. Outside opening PST sure would be cool! There are some design limitations that I’ll cover in my review. Will try to get it out by the weekend...been busy modding the lock tab hinges on my Rebar...
Cheers, Max -
@gerleatherberman said:

Will definitely be looking forward to a review of an early Bear Jaws. Thank you again for doing the leg-work, Max!I have a soft spot for Bear Knives and MTs, as they are produced in my home state. But, that said, I can objectively look at them and am aware of where Bear needs to improve. Mainly, the locking system on the 'L' locking tools. They need to grind the lock lever tang bump down to where it is about flush with the handles. And for goodness sakes, Bear, lets get the QC tightened up. :ahhh
So this is not a Leatherman review, but I know there are people on this forum that collect multi-tools, and the Bear Jaws is a historically-relevant first-generation multi-tool that deserves a closer look.
It’s a bit of a ramble and 2,000 words, so I’m going to release this review in 3 sections to also add some pictures.
Bear Jaws 155 Review (part 1 of 3)
Bear MGC Cutlery started in 1991, when former employee Ken Griffey bought the Parker Edwards facility in Jacksonville, Alabama, that was scheduled for closure. He sold the business to Swiss Army Brands in 1999, staying on to manage it. Ken bought it back in 2004 after Victorinox took over Swiss Army Brands, running it with his son, Matt, as Bear & Son Cutlery.
In 1995, and prior to the Swiss Army Brands acquisition, Bear introduced the Bear Jaws 155, a multi-tool with outside opening tools. Nothing we would not recognize today, but quite revolutionary for a multi-tool in the mid-90s. So much so that it was nominated as the most innovative new multi-tool on the market by Blade Magazine in 1995, and Bear MGC was awarded a patent for it in 1996.
At the time, Leatherman was ripping-up the multi-tool market with million-plus unit sales across only three models. The original Leatherman PST was the industry benchmark, to the point where Leatherman had successfully taken on over a dozen competitors legally for copying their design.
With their own patent, Bear MGC had a little more room to go head-to-head with Leatherman’s market-leader. Visually, the 155 mirrors many elements of the PST. It was the same 4” length with polished, straight-sided stainless channel handles, near identical pliers and near identical plain-edged blade.
But the significant design difference of reversing the C-channel handles gives the 155 a much more comfortable grip when using the pliers, a clear advantage over the PST. In fact, this feature alone kills the PST dead in any hands-on comparison. The 155 is a good example of coming late to market with a better design, but hopelessly behind the sales and marketing momentum of the market leader. Bear MGC was successful in rebranding the 155 for several companies, including Crescent, Sears and LL Bean, but they were never a threat to Leatherman’s market dominance.
Bear MGC added a locking mechanism to the 155 in 2001 (155L), and this model continues to be manufactured by Bear & Son Cutlery, along with smaller and larger versions (mirroring the LM Micra and Super Tool). As second-generation multi-tools, these Bear designs are now a little dated, but worthy of the recognition they deserve.
The example under review is an early-generation 155, stamped “patent pending”, dating it to 1995 or early 1996. I have a pre-date stamped, post-metric Leatherman PST that I will use as a comparison. While the PST is older, it is the model Bear MGC would have referenced when designing the 155. This is obvious when comparing these two products.
First impression is the greater heft of the 155. At 199g (7oz), the 155 is a significant 49g (1.7oz) heavier than the PST. In fact, the 155 has a similar weight to the modern 4” Leatherman Rebar that weighs in at 188g (6.6oz). In fact, the 155 and Rebar are visually and dimensionally a close match.
The main reason for the additional weight is the thicker gauge steel and the beefy tools. The 155 handles are made from heavy 16-gauge steel (0.06in), compared to the PST that uses only 20-gauge steel (0.03in). Today, Leatherman does not even use this thick gauge steel in their largest multi-tool, the Super Tool 300. There’s no doubt that the extra weight contributes to the perceived robustness and quality of the 155.
(…part 2 will follow tomorrow)



-
Thank you very much for doing this, Max! :)
Very good write-up so far.Got these out to make sure I am following along properly.


-
Excellent review with the write up and pics
I have a few Bear tools and they have one of the most aggresive wood saws out there
thanks for taking the time to do these historical reviews

-

I had one but I cannot remember what I did with it.

-
Great read

-
an excellent insight, Max!

-
Thanks for the info

-
@CallsignBadger said:
Thanks for the info

Thanks all...
part 2 tomorrow... -
Edit:
Oh, nevermind

-
Bear Jaws 155 Review (part 2 of 3)
Visually, the 155 is polished to an almost mirror-finish. Turning the 155 in your hands reveals its party-trick; the outside-opening tools. There’s no doubt that this patented feature gives the 155 a real advantage over the PST. While it’s not possible to open a tool with one hand, it’s easy to quickly select and deploy any one, with no handle or plier head to get in the way.
But there are a few unwanted consequences of reversing the C-channel handles to face outwards. The first consideration is that more dirt will enter and get trapped between the tools compared to the PST that closes around its tools. The second consideration relates to the geometry of the tools relative to the plier head. Because the plier head enters the handle on the opposite side to the tools, the 155 needs a stop plate midway inside the handle to prevent the head dropping through the handle and pushing the tools to the outside. These stop plates take up valuable space and are not needed in the PST where the plier head can push up directly against the tools, and everything folds up against the spine of each handle.
The 155 sample I have does not keep a tight closed position, which appears to be a result of the plier pivot-handle geometry. Maybe they fixed this in later versions, or maybe not, as it would require a retool of the head or stamping of the handles. Either way, this is a small design quirk that gives the 155 a little bit character that matches its slightly industrial feel.
Turning our attention to the plier head, it looks like it came out the same factory as the head on the PST, but looks can be deceiving as there are some significant, and possibly critical differences.
The 155 and PST plier heads are both 56mm (2.2in) long, and the profile of the 155’s head is a clear copy of the PST, with near-identical needle-nose, normal pliers and wire cutters design. The 155’s head is slightly narrower (by 0.3mm, 1/100in), because the head has to drop through a gap between the rolled edges of the handle, while the PST has no rolled edge where the head folds back into the handle, so is overall a lot thinner across the handle (11.7mm vs 14.8mm / 0.46in vs. 0.58in).
The 155 has a little more flex visible around the plier’s central pivot under load, more than can be explained by the slightly narrower (lower cross section) design alone. The longer pivots that link the plier head to the handles may be creating additional flexing under gripping load, but it’s also easier to apply much more grip pressure with the 155 because of the wider and more comfortable handles.
While we’re on the handles, the 155 uses standard torx button-head screws to secure the pivots, making user servicing a lot simpler that the knurled rivets Leatherman uses on the PST, and to this day on many of its multi-tools. The plier pivots of the 155 span an outside surface distance of 13.2mm (0.5in), which is a little more that the PST pivots that only need to span a distance of 9.3mm (0.35in), so theoretically, stronger.
Like the Leatherman PST, the 155 has ‘USA’ cast into the plier pivot, but facing outwards. ‘MADE IN USA’ is also stamped into the handle, long before the rule regarding material/component sourcing made this mark a little more difficult to use.
The ruler stampings are clear and sharp, and because of the thicker gauge steel, more stable than those on the PST that tend to distort the surface. Also, the 155’s metric and inch rules are on opposite sides of the handle, making it a lot easier to read off the markings compared to the PST that squeezes both scales on the narrow spine (in my sample).
(…the final part will follow tomorrow)




-
Part 2 was worth the wait and I thank you again for taking the time to do these
Can't wait for part 3 now :ahhh :D -
Nice write up

-
excellent read

-
@ThePeacent said:
excellent read
Thank you all for the feedback. I’m pleased it’s of interest!
-
Very attentive and well written! Thank you, Max!

I'm only saddened that part 3 will be the finale.

-
Great job on this


-
@gerleatherberman said:
Very attentive and well written! Thank you, Max!
I'm only saddened that part 3 will be the finale.


Thank you for taking the time to write this.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login