February Fixie Challenge
-
Would that be the same as pine tar that I’ve seen used in a few wood preservative mixes?
I think so.
I've used another similar product called Montana Pitch Blend.

This is also made with pine pitch and beeswax. I just like the Huberd's. I think the pine pitch or pine tar prevents fungal breakdown of wood and leather.
Is this one bear safe?

-
Today was a relaxed day, I worked on some homework and helped my wife pack for her trip to Vegas for a birthday party for her friend.
My wife will be gone over the weekend which means I can work on some projects, gotta get prepared for spring, that is prime bass fishing season here in Texas before the Texas summer. I also plan on going hiking and camping more and I need to do some preps with my gear. A knife will surely be needed and will be a good test.So for the night, here is my knife next to a glass of George Dickel. Cheers to you and yours!

Ken
Sent from my iPad using Tapatalk
Nice green para cord on your ulu.

-
@KBM3 said:
Hahaha Nix, I saw your pic of the Montana Pitch and was wondering how the topic of ice cream came up until I read your post and then I started to laugh.
That container of pitch looks really similar to some Texas ice cream.
Now I want some ice cream!
Ken
Sent from my iPad using Tapatalk

Well have an extra bowl when you have it for me...ice cream is the biggest desert that I miss eating!
-
Thanks everyone! With the exception of the polished blade of the Mora, I really don't notice any difference. Price wise and quality wise, they're very comparable.
-
Is this one bear safe?

Doesn't have that smoky BBQ aroma of the Huberd's, but the beeswax does have a hint of a honey smell......so...not so much.


I’m going to go to bed....I will let you know tomorrow if I dreamed of bears chasing me...if you don’t hear from me, you will know they caught me!
-
@Nix said:
Cool new knife, Sak60!
Can you tell us a bit more.....

Pal Blade Company purchased the cutlery division on January 17, 1941 from Remington-Dupont which had been located at Bridgeport, Connecticut. Remington sold the cutlery department in order to utilize the existing Bridgeport plant space for the production of munitions ( I believe for the production of the Model 1903 rifle for the British government - GMC).
Pal leased a 100,000 square foot facility in Holyoke, Mass. located on the west side of Bigelow Street between Appleton and Cabot Streets. This building had been the A building of the Farr Alpaca Company. Interestingly enough, part of this building in the 1800s had been the home of the Henry Seymor Cutlery Company, makers of shears and scissors.
Removal of the machinery to Holyoke began on February 4, 1941 with the move scheduled to be completed within 30 days. By March 1st they planned to be in operation with two shifts employing 300 workers, many of them women. Plans were to have 450 employees within 3 months, and they were advertising that the company would be the largest cutlery manufacturing company in the United States. Full production was to begin in June, 1941.
At the time, Pal Blade also had factories in Plattsburg, New York, Montreal, Canada, Newfoundland and South America. Owners were brothers Abraham Mallman of Montreal and Joseph Mallman of New York.
The above information was taken from the February 3, 1941 Holyoke Transcript-Telegram
During World War 2, the plant was converted to make bayonets, sheath knives, and pocket knives for US forces. Following the war, the name was changed to the Pal and Personna Blade Co., Inc. Other company plants were located in Montreal, Canada, Plattsburg, New York, Barranquilla, Columbia and Buenos Aires, Argentina.
By December, 1945 the plant had been converted to peace time products and expanded their product line to include many items which had been unavailable during the war and for which there was a large market. Under the Pal name they produced pocket knives, paring knives, slicing knives and kitchen utility items in the moderate price range. The Personna items included gift sets, carving sets, carving knives and kitchen knives in the higher price brackets.
Employment in 1946 reached 950 workers on two shifts. 7:00 AM to 4:45 PM (3:45 PM for the women workers) and another shift from 3:00 PM to 11:00 PM. The plant worked 5 ½ days a week, closing at noon on Saturdays. At the time the plant operated on two floors of 90,000 square feet each. The first floor contained most of the assembly lines and production tables, while the basement was occupied by store rooms, a maintenance shop and one work room where paring knives were made. (Note – the building no longer exists - GMC)
The above information was taken from the December 4, 1946 Holyoke Transcript-Telegram
-
I'm generally not a fan of batoning but I've heard quite a bit about Mora's and batoning wood. It did a great job on this log, which was just narrow enough to finish :D

-
Cool new knife, Sak60!

Can you tell us a bit more.....

Pal Blade Company purchased the cutlery division on January 17, 1941 from Remington-Dupont which had been located at Bridgeport, Connecticut. Remington sold the cutlery department in order to utilize the existing Bridgeport plant space for the production of munitions ( I believe for the production of the Model 1903 rifle for the British government - GMC).
Pal leased a 100,000 square foot facility in Holyoke, Mass. located on the west side of Bigelow Street between Appleton and Cabot Streets. This building had been the A building of the Farr Alpaca Company. Interestingly enough, part of this building in the 1800s had been the home of the Henry Seymor Cutlery Company, makers of shears and scissors.
Removal of the machinery to Holyoke began on February 4, 1941 with the move scheduled to be completed within 30 days. By March 1st they planned to be in operation with two shifts employing 300 workers, many of them women. Plans were to have 450 employees within 3 months, and they were advertising that the company would be the largest cutlery manufacturing company in the United States. Full production was to begin in June, 1941.
At the time, Pal Blade also had factories in Plattsburg, New York, Montreal, Canada, Newfoundland and South America. Owners were brothers Abraham Mallman of Montreal and Joseph Mallman of New York.
The above information was taken from the February 3, 1941 Holyoke Transcript-Telegram
During World War 2, the plant was converted to make bayonets, sheath knives, and pocket knives for US forces. Following the war, the name was changed to the Pal and Personna Blade Co., Inc. Other company plants were located in Montreal, Canada, Plattsburg, New York, Barranquilla, Columbia and Buenos Aires, Argentina.
By December, 1945 the plant had been converted to peace time products and expanded their product line to include many items which had been unavailable during the war and for which there was a large market. Under the Pal name they produced pocket knives, paring knives, slicing knives and kitchen utility items in the moderate price range. The Personna items included gift sets, carving sets, carving knives and kitchen knives in the higher price brackets.
Employment in 1946 reached 950 workers on two shifts. 7:00 AM to 4:45 PM (3:45 PM for the women workers) and another shift from 3:00 PM to 11:00 PM. The plant worked 5 ½ days a week, closing at noon on Saturdays. At the time the plant operated on two floors of 90,000 square feet each. The first floor contained most of the assembly lines and production tables, while the basement was occupied by store rooms, a maintenance shop and one work room where paring knives were made. (Note – the building no longer exists - GMC)
The above information was taken from the December 4, 1946 Holyoke Transcript-Telegram

Great information! That is interesting on the women getting off a hour earlier - no doubt to give them time to get home and ready the family meals and other chores. It’s a shame the building no longer exists. -
@Barry Rowland said:
I'm generally not a fan of batoning but I've heard quite a bit about Mora's and batoning wood. It did a great job on this log, which was just narrow enough to finish :DI’m not a fan of batoning myself...the right tool for the right job...and as often as I have been in the woods, I have always found enough kindling to start a fire without having to baton anything. It is nice to know it can do it and if I had to I would!

-
Great stuff, Sak60!
Nice testing, Barry! I think that Mora has a stick-tang. Battoning might be a bit of a trial for it. Good to see it did well. Needless to say, I won't be battening anything with my Ulu.

-
@Nix said:
Great stuff, Sak60!Nice testing, Barry! I think that Mora has a stick-tang. Battoning might be a bit of a trial for it. Good to see it did well. Needless to say, I won't be battening anything with my Ulu.

Actually I think you have the right one for chopping - you could get a nice piece of wood, split the end long and wide enough to slide the handle in the wood and secure the end pining the ulu in it and have a hatchet. Mind you, within reason on the wood.
-
Day 8 photo

-
Great post and photos everyone!

-
Great stuff, Sak60!
Nice testing, Barry! I think that Mora has a stick-tang. Battoning might be a bit of a trial for it. Good to see it did well. Needless to say, I won't be battening anything with my Ulu.

Actually I think you have the right one for chopping - you could get a nice piece of wood, split the end long and wide enough to slide the handle in the wood and secure the end pining the ulu in it and have a hatchet. Mind you, within reason on the wood.
I was thinking about that, too. The ulu's blade is fairly thin, I'm not sure it would stand up to much real chopping.

Sometimes these knives are tougher than one might think. On the other hand, I've already seen a little chipping in the edge with the can opening task........
-
Great stuff, Sak60!
Nice testing, Barry! I think that Mora has a stick-tang. Battoning might be a bit of a trial for it. Good to see it did well. Needless to say, I won't be battening anything with my Ulu.

Actually I think you have the right one for chopping - you could get a nice piece of wood, split the end long and wide enough to slide the handle in the wood and secure the end pining the ulu in it and have a hatchet. Mind you, within reason on the wood.
I was thinking about that, too. The ulu's blade is fairly thin, I'm not sure it would stand up to much real chopping.

Sometimes these knives are tougher than one might think. On the other hand, I've already seen a little chipping in the edge with the can opening task........
If it is on the thin side then I wouldn’t.
On a different note, regarding batoning...I was thinking on just starting the split and then going to a wedge to finish the split. Want to try that out with a Ka-Bar military that I bought and rides in my bike pack as a backup. -
A little snak

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

