February Fixie Challenge
-
@Nix said:
Wow. That's a big chip in the blade.It will take a lot of work to get that out, but might be a fun project. I might start with a file and file it to shape. Then finish up with stones. Regardless, it'll be a lot of work.
Thanks for the tip

I might try that and see if it feels like a lost cause, then it will be a decoration. If I can do it without loosing my mind I'll maybe use it again, but not for batoning
Sent fra min FRD-L09 via Tapatalk
-
Sand paper might work too.
Start with 60 grit and glue that to a flat surface. Might be good to use wet/dry sandpaper with water.
-
@RF52 said:
I might try that and see if it feels like a lost cause, then it will be a decoration. If I can do it without loosing my mind I'll maybe use it again, but not for batoning
Oh, it's not a lost cause!
You've got a good piece of steel there. You could turn it into a short knife or a longer thin-bladed knife, like a fish fillet knife.

-
I might try a combination of filing and sandpaper, and try to be patient.
Just take my time over a couple of days and not rush it might make it nice again
Sent fra min FRD-L09 via Tapatalk
-
-
I might try a combination of filing and sandpaper, and try to be patient.
Just take my time over a couple of days and not rush it might make it nice again
Sent fra min FRD-L09 via Tapatalk
It might be worth taking a sharpie or other marker and sketching a design directly onto the knife.
Might try that, thanks

Sent fra min FRD-L09 via Tapatalk
-
day 8: did a bit of drinking and cutting

-
Day 8
RF, just an old ‘war wound’. One day you can tell your grandkids that you picked up that nick on a challenge, and here’s the well-deserved badge.
I did not see much action today, unlike the LEGO Aston.


-
Nice shots, guys!

-
@Max Stone said:
Day 8
RF, just an old ‘war wound’. One day you can tell your grandkids that you picked up that nick on a challenge, and here’s the well-deserved badge.
I did not see much action today, unlike the LEGO Aston.

Good point Max, but I think I'll try to remove the chip

Nice pic again

Sent fra min FRD-L09 via Tapatalk
-
Great pics and stories guys!

RF52, sorry about the chipped blade man, but Max Stone has a good point!
I'd go with filing to bring back the edge. Just don't forget to attach the file to some sort of guiding rod to keep the angles consistent.
Something like this

Sent from my Redmi Note 5
-
Day #8 - hard and busy day at the office today and not much action at home, so I leave you with a picture of the little guy just sitting pretty on top of my EDC pouch.

Sent from my Redmi Note 5
-
Lookin' good, FInixNOver!

-

Sent fra min FRD-L09 via Tapatalk
-
@FInixNOver said:
Great pics and stories guys!

RF52, sorry about the chipped blade man, but Max Stone has a good point!
I'd go with filing to bring back the edge. Just don't forget to attach the file to some sort of guiding rod to keep the angles consistent.
Something like this

Sent from my Redmi Note 5
Do you have any tips in making one of those rigs? Looks very nice

Sent fra min FRD-L09 via Tapatalk
-
Day 07:
I used the Ulu to trim a couple threads today, but didn't take any action photos. I thought it might see a little extra action, and just didn't bother. Sorry.
Anyway, here is the Ulu on the craft mat:

-
Sorry for the chip, thankfully its sortable

@FInixNOver said:
I'd go with filing to bring back the edge. Just don't forget to attach the file to some sort of guiding rod to keep the angles consistent.
Something like this

neat idea, adjustable with the eyebolt i assumeDay 8,
Just a bit of whittling ;)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

