February Fixie Challenge
-
Great post and photos everyone!

-
Great stuff, Sak60!
Nice testing, Barry! I think that Mora has a stick-tang. Battoning might be a bit of a trial for it. Good to see it did well. Needless to say, I won't be battening anything with my Ulu.

Actually I think you have the right one for chopping - you could get a nice piece of wood, split the end long and wide enough to slide the handle in the wood and secure the end pining the ulu in it and have a hatchet. Mind you, within reason on the wood.
I was thinking about that, too. The ulu's blade is fairly thin, I'm not sure it would stand up to much real chopping.

Sometimes these knives are tougher than one might think. On the other hand, I've already seen a little chipping in the edge with the can opening task........
-
Great stuff, Sak60!
Nice testing, Barry! I think that Mora has a stick-tang. Battoning might be a bit of a trial for it. Good to see it did well. Needless to say, I won't be battening anything with my Ulu.

Actually I think you have the right one for chopping - you could get a nice piece of wood, split the end long and wide enough to slide the handle in the wood and secure the end pining the ulu in it and have a hatchet. Mind you, within reason on the wood.
I was thinking about that, too. The ulu's blade is fairly thin, I'm not sure it would stand up to much real chopping.

Sometimes these knives are tougher than one might think. On the other hand, I've already seen a little chipping in the edge with the can opening task........
If it is on the thin side then I wouldn’t.
On a different note, regarding batoning...I was thinking on just starting the split and then going to a wedge to finish the split. Want to try that out with a Ka-Bar military that I bought and rides in my bike pack as a backup. -
A little snak

-
@Rapidray said:
On a different note, regarding batoning...I was thinking on just starting the split and then going to a wedge to finish the split. Want to try that out with a Ka-Bar military that I bought and rides in my bike pack as a backup.
I've seen entire trees split into planks with wooden wedges. Archimedes knew what he was doing with those.

-
On a different note, regarding batoning...I was thinking on just starting the split and then going to a wedge to finish the split. Want to try that out with a Ka-Bar military that I bought and rides in my bike pack as a backup.

I've seen entire trees split into planks with wooden wedges. Archimedes knew what he was doing with those.

So I don’t even need to start with a knife at all...I like that ideal way better. Thanks!

-
This challenge is continuing it's greatness!

Seems like your Mora held up better than my knife today Barry

Day 10:
Took the wife and dog out in the woods for a nice walk this evening.
All the wood is quite wet so I chopped and batoned some wood for my woodburning stowe to heat up water for a couple of teacups.
Noticed a big chip in the blade so it turns out it's not as good as I initially thought...On the other hand, I just need to order a blade from a bladesmith that makes knifeblades in laminated steel and make my own handle the way I want it

I might try and grind away the chip and use it for more delicate task from now on.





Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
This challenge is continuing it's greatness!
Seems like your Mora held up better than my knife today Barry

Day 10:
Took the wife and dog out in the woods for a nice walk this evening.
All the wood is quite wet so I chopped and batoned some wood for my woodburning stowe to heat up water for a couple of teacups.
Noticed a big chip in the blade so it turns out it's not as good as I initially thought...On the other hand, I just need to order a blade from a bladesmith that makes knifeblades in laminated steel and make my own handle the way I want it

I might try and grind away the chip and use it for more delicate task from now on.





Sent fra min FRD-L09 via Tapatalk

Ouch! Not good. Hope it works out on the regrind for sure.
Oh - nice night photo’s by the way!

-
This challenge is continuing it's greatness!

Seems like your Mora held up better than my knife today Barry

Day 10:
Took the wife and dog out in the woods for a nice walk this evening.
All the wood is quite wet so I chopped and batoned some wood for my woodburning stowe to heat up water for a couple of teacups.
Noticed a big chip in the blade so it turns out it's not as good as I initially thought...On the other hand, I just need to order a blade from a bladesmith that makes knifeblades in laminated steel and make my own handle the way I want it

I might try and grind away the chip and use it for more delicate task from now on.





Sent fra min FRD-L09 via Tapatalk

Ouch! Not good. Hope it works out on the regrind for sure.
Oh - nice night photo’s by the way!

A bit surprised by the size of the chip, more like a chunk...
If anyone have any tips or tricks to get the edge back I'll appreciate it very much

Don't have access to any powertools/grinders so it must be done by hand.
Maybe sand it down with sandpaper and finish on a sharpening stone?I like a good fire pic in the dark

Sent fra min FRD-L09 via Tapatalk
-
Wow. That's a big chip in the blade.
It will take a lot of work to get that out, but might be a fun project. I might start with a file and file it to shape. Then finish up with stones. Regardless, it'll be a lot of work.
-
@Nix said:
Wow. That's a big chip in the blade.It will take a lot of work to get that out, but might be a fun project. I might start with a file and file it to shape. Then finish up with stones. Regardless, it'll be a lot of work.
Thanks for the tip

I might try that and see if it feels like a lost cause, then it will be a decoration. If I can do it without loosing my mind I'll maybe use it again, but not for batoning
Sent fra min FRD-L09 via Tapatalk
-
Sand paper might work too.
Start with 60 grit and glue that to a flat surface. Might be good to use wet/dry sandpaper with water.
-
@RF52 said:
I might try that and see if it feels like a lost cause, then it will be a decoration. If I can do it without loosing my mind I'll maybe use it again, but not for batoning
Oh, it's not a lost cause!
You've got a good piece of steel there. You could turn it into a short knife or a longer thin-bladed knife, like a fish fillet knife.

-
I might try a combination of filing and sandpaper, and try to be patient.
Just take my time over a couple of days and not rush it might make it nice again
Sent fra min FRD-L09 via Tapatalk
-
-
I might try a combination of filing and sandpaper, and try to be patient.
Just take my time over a couple of days and not rush it might make it nice again
Sent fra min FRD-L09 via Tapatalk
It might be worth taking a sharpie or other marker and sketching a design directly onto the knife.
Might try that, thanks

Sent fra min FRD-L09 via Tapatalk
-
day 8: did a bit of drinking and cutting

-
Day 8
RF, just an old ‘war wound’. One day you can tell your grandkids that you picked up that nick on a challenge, and here’s the well-deserved badge.
I did not see much action today, unlike the LEGO Aston.


-
Nice shots, guys!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
