Cull Update
-
One of my combo themes, still isn't complete, even after all these years, and I've come to the conclusion that I won't be happy until I build my own solution - and that's formal carry.
When it's time to get suited up, a different set of tools come out to play. I want something light, pocketable without "printing", more glamorous looking than usual, and yet still be able to handle tasks that I realistically expect I might encounter.
At the larger end of the options, is a Wenger Traveler and Sideclip. I never got my hands on a polished version, but intend to polish one of mine up. I have some micro-mesh cloth, and some of those multi-grit nail buffer pads for that specific reason.
If I want to go lighter than that, I have the scrolled bolster Case barlow, and a decent little stainless toolset with quartz pocket watch, which will easily distribute about my person. I haven't quite got the "yellow metal" one complete though, to pair up with the gold plated mechanical watch. I do have the TiNi pliers and Cu Maratac, but need to carry out my intended modification of a Victorinox Executive to really round off that set.

-
Good thread Al and I'm enjoying reading your thoughts regarding what and why you carry .

-
One way of managing combos like all these, is to relate them to shoes. Bear with me, there is a logic path here, honest! :D
Lets go back over some combos to illustrate my point.
Hiking Boots
Spoiler:
Work Boots
Spoiler:
Polished dress shoes
Spoiler:
Light trainers or sandals
Spoiler:
Slippers (at home, or on holiday)
Spoiler:
And then there's the issue of the casual shoes for ordinary daily carry. Here's where is goes completely ape.
While I've posted pics only showing one or two combo formats at a time, once you push the "specific role combos" to one side, there's a huge abundance of regular daily carry options.... and it will get worse, before it gets better...

-
Bah!
Why do those spoiler tags not have images in.OK, brief interlude while I fix this....
Talk amongst yourselves :D
-
OK, fixed. Sorry about that. :)
-
Where was I ... Ah, yes! It'll get worse before it gets better.
That's because I've still not done >:D
As shown above, I still need to rebuild the MP6000, and "archive" the blunt nosed pliers.
I still need to do the Executive mod.
I still need to polish the Sideclip.... and I still have A LOT of knife mods to do.
The three Victorinox and Wenger mods I shown earlier, are all going to be redone. Out of the pile of donor parts, another four new mods will be born. One 93mm non-alox, another couple of 91s, and the 74mm mentioned already, These will be a long time coming, as I have quite ambitious plans for all of them. I've given insights into some of the tweaks I have planned in the past, but I don't want to spell out every last detail of each one. I'll let that be a surprise for later. However, I expect there will be several tens of hours spent on each one, and each will have it's own new set of logistic and technical challenges.
So until I get all those done, and spend time "testing" them in their relevant combos (it ALL revolves around the combo), I won't know which my favourites are, and which other combo elements will suddenly find themselves redundant.

-
For me, everything revolves around the combo, and the environment/role that combo will be carried in. Some things just don't fall neatly into a combo. I mentioned before, that the MP6000 mod had lost it's "placement" since I no longer found myself in the two hard use environments, but that's something that I can address and change.
Some stuff, like the Style PS, just ends up being a bit of an odd sock, and never really pairing up well with anything. I've tried to like it, and repeatedly tried to incorporate it, but never achieved either to my satisfaction.
Here's why...
It's got pliers, scissors, bottle opener, nail file, and a small driver that will actually turn a loose-ish PH2 headed screw. It's even got a pair of tweezers tucked in there too. Brilliant. All I need is to add a traditional pocket knife, and I've got a cool little combo, that's great for carrying in shorts.
Except I haven't.
The scissors spring has crapped out again. I've already had this replaced once, and it's not worth the stamp to send it back in again. The next one will be no better, and it's just a matter of time before that one meets the same demise. So now I need a knife, and I need scissors.
A Classic gives me decent scissors, but doubles up on tweezers, nail file, and driver - so the only benefit the Style gives is the pliers and bottle opener. Pairing it with a Micra is even worse, as that doubles up on the bottle opener too, not to mention the build quality on mine - despite it celebrating their 30th Anniversary - is abysmal. The scissors are next to useless, and if I ever find a role for them, I'll need to repeen the scissors to take the gross slop out of them, and look at why the "backspring" part of the handles, isn't giving the retention it should on the smaller tools ::)
Well, it is another Leatherman after all. There's a good reason I own more Gerbers :P :D
... but moving swiftly on before I get flamed...

The comedy, highly sprung, ping out of your hand and fly across the room, True Utility SciXors, are a fantastic prank to play on someone who desperately needs scissors, but doesn't carry their own tools. However, they're next to useless if you actually need scissors yourself :D In fact the best way of making up for the Style PS scissor defecit (which is still oK for single snip solutions, just not multiple snips), might be adding nail clippers. Unfortunately that tool, a penknife and nail clippers, just doesn't feel like a proper combo to me.
So that's just a brief insight into the type of thoughts my head spews out when putting together these combos :)

-
So, summing up,
-
I've come a long way, but still have more to do.
I have more to come, as well as more to go
When the new stuff comes, that might changes what old stuff goes
I never say in a single paragraph, that which I can spread over two pages

Also, despite feeling snowed under with options, they are all (or at least most of them) getting some use. I'm pretty sure I've used every one of the knives in the attached picture over the last 12 months. There's also the issue of "tomorrow".
My life has changed immensely in the last three years. Who knows what further changes my lie in store. Even if my health and lifestyle don't change, tools break, or get lost or stolen, despite the reasonable care we give them. The surplus that I currently own, would be incredibly difficult or expensive to replace should I need to do so at a later date.
The Wave consists of parts from a 2004 Wave, a Grappler, a Blast and a Wingman. Try tracking all those down in good condition in 10 years time. Will the market continue to offer pocket clipped OHO sub 3" slippies? The parts for the planned Swiss knife mods took a long time to round up too. So while I do sometimes feel swamped in my residual excess, even though I've managed to offload great swathes of stuff that was overshadowed by what i've shared in this thread, I have to bear in mind that anything else I let go, might never be replaced by its equivalent or equal.
So the journey continues, to and fro. Tools in, tools out, tools killed, tools born. No matter how frustrated and crochetty I might get along the way, I'm certainly a lot happier in my tool selection than I was when I started. Many of the trophies I collected, were hard won, and I'd be unlikely to win them again. I can honestly say that I have some of the best tools and mods I could wish for, in terms of my own evolving needs and preferences.
Ok, I'm done :)
Thanks for following along, and putting up with my ramblings in my tale of the journey so far



-
-
@Aloha said:
I'm am thankful to not have been so hasty with some tools. I also make it a point as you allude to, to put certain tools into use to get a clearer understanding of that tool or as you state "Maybe I ought to force myself to start carrying them all more, and see which ones I get sick of quickest." My Skeletool CX is such a tool. I am glad I just put it aside and let enough time pass to try again. My Charge TTi is another.I've revisited tools a few times now. I didn't instantly connect with the Gerber Multipliers, which have now become a strong favourite, and I sold my first Sideclip, only to really notice the benefits and true potential of the Sideclip/Swiss knife combo a couple of year later.
The CS4, XE6, and Blast are tools I bought, sold then bought again, only to realise I didn't like them any better the second time around. However, revisiting them helped me settle on the Fuse and KF4 as the sweet spots in the Zytel and Juice lines.
The Rebar was a fail for me both times, and even after modding it, and trying a custom loadout with the integral cutter pliers, I still couldn't abide it. I tried Bear and Sons pre-Swisstools twice too. Solid tools, and an interesting point in the timeline, but just that little bit too clunky for me.
One thing that's been great for wondering if I made a mistake before, is the UK meet. It's good to try tool versions that I've let go in the past, and see if my perceptions have changed. That's how I "rediscovered" the Sideclip again.
@Aloha said:
I am not hesitant to assign a tool a purpose even if that purpose on the surface is lowly ;). I don't currently have a bathroom drain tool, YET
. I have tools parceled about my home. I have them on my coffee table, in my shed, garage, kitchen drawer, hall closet, small tool box, vehicle, evacuation bag, and other places. These are tools that are good tools just not tools I want to carry. This is yet another distinction I tend to make when deciding a tools fate. Just because I don't want to carry it doesn't mean its time to go.I really like this thread.

I really ought to do this a little more, and put one of the more comprehensive pliers tools in the kitchen. All that lives in there is a Tourist knife in the cutlery drawer, and a few specific food and drink oriented tools (a huge BBQ tool I got from Beat, the Bar10der, and a pair of CRKT Crossover shears). The orange hiking gear lives in an outdoors vest in the wardrobet, the Octane currently resides in the bathroom, and the rest is stored all together in drawers.
I used to be a lot better at having tools spread out where I might need them. I suppose I've tended not to bother as I don't stray as far now. I do have a couple of items stashed in kits though, such as the Clipper in the washbag, and the Compact in a first aid kit.
-
@Aloha said:
It is super tricky to find that balance you seek. There are some tools that can be easily parted with after trying and trying. I know those all too well. Back ups are good. Once I deem a tool a back up then I make peace with it so I don't deliberate on and on about selling or keeping.Beater tools. I have tools that are tools I have no problem working hard with little regard. It if breaks then it breaks. I have a Swisstool in my garage for that as well as in my house tool box. I don't mind keeping them in their places. Out of sight, out of mind, till of course I need them. I have a few SAKs and folders that also fall into this category.
Next up the ladder are tools that are on standby. These tools are good tools that have proven themselves. I keep them closer at hand for things that pop up. My OG Surge and Modded Wave are my coffee table tools. If I need a tools I grab these first. If I need dedicated tools then I get my house tool box. If I need more specialized tools then out to the garage. I keep a SAK, folder, and Micra on my coffee table as well as a headlamp.
Further up the ladder are my on person tools while home doing chores. These are tools I rely on as I will have them on person. Today for example I have my Skeletool CX, OC Farmer, Squirt P4, and Benchmade Nimravus on me. If I require more then I can go to my garage or house tool box. If my Farmers saw comes up short for example, I'll go to my shed and fetch my saw. If my Skeletools pliers are a bit weak then out to my garage to get the big channel locks.
Work tools. This is much like my on person tools except that these tools are only used at work. My Charge TTi, Deluxe Tinker are examples of those tools. I like both tools a lot. They earned their spot on work detail.
Off day tools. I have tools that I carry off days. These are tools that I will leaving the house with on off days. Errands, trips to the store, lunch with my kids, etc.
Hiking, camping, walks tools, evacuation bag tools, etc.
Like many here I ended up with a lot of tools. Some were easily moved on. Some are just wonderful and are now shelf queens. Some have jobs. The spillover tools are the ones I have a hard time with, I've recently referred to these as benchwarmers. These are tools that aren't back ups, aren't still being tested, aren't bad tools, they are just EXTRA stuff accumulated over this process.
I think many of us who aren't actively collecting or seeking out tools to collect find ourselves in similar circumstances. I am still a collector to an extent admittedly. Funny thing is, I just don't know what the next tool I'd designate to shelf queen status until I meet it
.One thing I noticed that made a big (perceived) difference, was rounding up all the mod fodder, and dumping it in a cardboard box by the hobby desk. Instantly the number of Swiss knives I was faced with every time I opened the drawer, halved in one foul swoop :D
There are other duplications in the drawers, such as both Sideclips, both Byrd Terns, the spare MP400 that has all the offcast parts from a knifeless mod, and the spare handles for the MP600..Clearing those out and stashing them somewhere out of sight might give a little psychological lift Too. I have got a box with assorted spare parts in, and maybe organising that a bit better and putting the duplicates in there, would make sense, but I don't want to fall into the hoarding trap of keeping stuff but just hiding it so I can pretend its not really there :P.
I'll have a play with the idea though, and just have a "pick of the day" drawer, and just put the rest in a different drawer, just so it's not hitting me between the eyes every day.
-
Some of my favorites threads and videos to watch are ones discussing what people carry and why. I like to read and hear about the mindset of how one reaches conclusions about gear. I also like to see how one item may not have worked for someone yet I find does for me, or vice versa. When it comes to choosing what to carry and what works is a matter of personal discovery if one decides to go that route. Another route is simply familiarity. This can work too.
I have come to really appreciate combinations. Yeah I carried a MT, SAK, light, but until I gave it some further thought it was just tools. This might sound a bit much for some but for me it has streamlined what I carry and how. I'm also not lugging around a bunch of gear "just incase". The Squirt for me has become a staple of my carry. I want to like the Micra but after several attempts to carry it I find it needing a V.2 variant YMMV. If I want a scissor based tool I'd rather carry my Style CS.
Your keyring set ups are well very well thought out for what you desire and want to carry. I believe I am still working on the right combination myself.
I have thoroughly enjoyed this thread. Its helped me take a closer look at what I carry and has given me some great things to think about.
The next step for me are the benchwarmers. What to do with the benchwarmers

-
@AimlessWanderer said:
Fixed blades are exactly the same too. Way more than I need, but none I can single out as wanting to part with.If you ever decide to part with the Sheffield one on the bottom row 2nd from the left I know someone interested

-
@Aloha said:
Some of my favorites threads and videos to watch are ones discussing what people carry and why. I like to read and hear about the mindset of how one reaches conclusions about gear. I also like to see how one item may not have worked for someone yet I find does for me, or vice versa. When it comes to choosing what to carry and what works is a matter of personal discovery if one decides to go that route. Another route is simply familiarity. This can work too.I have come to really appreciate combinations. Yeah I carried a MT, SAK, light, but until I gave it some further thought it was just tools. This might sound a bit much for some but for me it has streamlined what I carry and how. I'm also not lugging around a bunch of gear "just incase". The Squirt for me has become a staple of my carry. I want to like the Micra but after several attempts to carry it I find it needing a V.2 variant YMMV. If I want a scissor based tool I'd rather carry my Style CS.
Your keyring set ups are well very well thought out for what you desire and want to carry. I believe I am still working on the right combination myself.
I have thoroughly enjoyed this thread. Its helped me take a closer look at what I carry and has given me some great things to think about.
The next step for me are the benchwarmers. What to do with the benchwarmers

Thanks mate. It's taken a long time for each of these combos to evolve and become as fine tuned as they are. I went through a heck of a lot of failed combos along the way too. All it takes is to be faced with one task that you can't handle, even though you really should, and the whole ensemble goes back to the drawing board.
As to your benchwarmers, I think that's a good analogy of the tools that I've been wrestling with. Great tools that you absolutely want on the team, that have no immediate need of. The knifeless MP600 mod is definitely one of those. I think I'll do the swap to regular plier head, and store the blunt nosed pliers as back ups. I'm loathed to part with them, as they'll be too hard to track down again in future, but I'll me more likely to use the tool with regular pliers. In turn, I'll feel better about having it on hand if it's something that I might actually pick up for a day's carry.
I'll shuffle things around over the next few weeks, with all the stuff I want to mod in one pile/drawer, everything that gets regular use/carry in another, and everything that doesn't seem to have a role in the third. Once all the mods are done, I might feel swamped again, but at least I can revisit it all, and see if my favourites are as they were, or have gotten even better :D
-
Fixed blades are exactly the same too. Way more than I need, but none I can single out as wanting to part with.
If you ever decide to part with the Sheffield one on the bottom row 2nd from the left I know someone interested

Ahh, the Warthog. Yes, that's a knife I don't particularly want to part with, even though I'm unlikely to ever need it. In the mythical "stuck in the woods with only one knife" scenario, that would certainly be my one. Since my personal abilities to get the most from it have shrunk, I've given it a few coats of looking at several times, but so far it's gone back in the keeper pile every time.
If I do decide to put it in the "let it go" pile, I'll be sure to put you at the head of the queue for it, Kev

-
The MP6000 is reborn.
Different head and handles, but same tool load. I reckon that just like the modified MP400, this can be carried with just a traditional knife, although it could of course be carried with a clipped OHO folder or Swissknife instead. I do like tools that lend more flexibility to putting together a combo :D

-
One thing I haven't mentioned in all this, is lights.
There have been a few strategically included in various kits. The keychain and small tool combos all have them, and there's a Nitecore tube on my keys. The outdoors ones both have them too, as does the travel wash kit, and the tool kit with the Diesel in. In fact, I think everything that isn't regular daily carry, has some form of light assigned to it. There's also one by the bed, and one in the kitchen.
The lights not dedicated to any ensemble are shown in the attached pic.
The bulk of the pocket carry is done my the Quark AA2 tactical, with the two cell tube. The second most used is the Sunwayman V10R - fantastic light - but it does have a habit of trying to escape from my pocket.
There's a couple of little ones that clip on top of a 9V battery, and they're excellent if there's a black out (doesn't happen often, and usually only for an hour or so) and also great for use in a small tent. The others don't get much use these days, mainly because they don't have a pocket clip, but I really don't mind having a few spare lights. As they have a more limited lifespan than a knife or pliers, I don't feel as overwhelmed by them. I've given quite a few away over the years too.

-
There's another issue with having too many combos. Sometimes you forget they even exist

I found this tin yesterday...



-
@AimlessWanderer said:
There's another issue with having too many combos. Sometimes you forget they even exist
I found this tin yesterday...
That seems a useful little load out. The kind of thing I would put in my briefcase.
-
I've never carried it
I built it, and promptly forgot about it 
It's a solution looking for a problem, unfortunately. If I stash it in the weekend bag for example, I'll just forget about it again, not keep the light charged, and not go get it if I ever needed it anyway. It's also not the kind of thing I'd carry in a pocket either. I was just trying to make surplus stuff useful, and failed :D
Needs garlic...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login