MiniMagLed - Mark II
-
Is the flickering normal? I though it was a defect in mine and took it in to be exchanged at Lowes.
-
@american lockpicker said:
Is the flickering normal? I though it was a defect in mine and took it in to be exchanged at Lowes.I've never any experienced any flickering issues with 2AA or 3AA Lux MiniMagLEDs after having owned several of each type.
All of mine have been quite reliable, including those given away as gifts.
There were a few reported instances of flickering in the 2AA version that were posted over on CPF. Most were resolved by cleaning the + battery contact with alcohol or ProGold IIRC.
Considering how many MiniMagLEDs are out there in circulation, there are bound to be a few reported issues.
.
-
I never had any issues with the terra lux modules in mini mags other than poor throw, the problem seemed to be with factory minimag leds. Cleaning the contacts help some, but it never completely solved the problem(although I used a pencil eraser, which might be why). I'd give the light another chance, but for my use, I want a flashlight that will work when I need it to, the maglite failed at that. I really hope though that this new model will work great.
-
My 3D mag doesn't flicker, but in the process of upgrading I did soldered points that're only friction fitted originally.
-
Sound interesting , wish they would do a 2xAAA version .
Chris
-
Terralux has an LED upgrade for 2AAA.
-
@SoDak said:
I never had any issues with the terra lux modules in mini mags other than poor throw, the problem seemed to be with factory minimag leds. Cleaning the contacts help some, but it never completely solved the problem(although I used a pencil eraser, which might be why). I'd give the light another chance, but for my use, I want a flashlight that will work when I need it to, the maglite failed at that. I really hope though that this new model will work great.Sorry to hear you had bad luck with your MM2AALED.
Maybe it was defective from the factory?
I'd have returned it immediately back to where you bought it.
IMHO a great thing about buying a Mag is that if you get a defective one, you can just go back to the store and swap it out for another. Or you can get your money back, if you just plain don't like it for some reason.
So, you can resolve most issues just by dropping by the local store where you picked it up.
If something goes wrong with a Mag, even years down the road from when you bought it, Mag will fix it or replace it for free. Mag stands behind their products in my experience.
You'll have to deal with mailing it back to Mag and waiting a few weeks, but that's true of warranty service anywhere.
.
-
Sometimes Mag will send you the part so you can replace it your self. They even throw in free tools.
-
Multis?

-
Well, they finally came to Quebec, and I picked one up from walmart. Quality wise, it's okay for the price, but otherwise pretty disappointing.
-color tint is pretty blue
-there is no useful focus ability, as soon as you turn it on it's in focus, but any further turn of head will make the reflector too high and block most of the light from LED.
-output kinda sucks, high is about the same as my fenix L0D's medium.
-about an inch longer than incan minimag
-no lanyard attachment pointBut then again, for $25 I'm not complaining.
-
I'll trade ya. Mine has a reddish/pinkish tint.
-
@jzmtl said:
Well, they finally came to Quebec, and I picked one up from walmart. Quality wise, it's okay for the price, but otherwise pretty disappointing.-color tint is pretty blue
-there is no useful focus ability, as soon as you turn it on it's in focus, but any further turn of head will make the reflector too high and block most of the light from LED.
-output kinda sucks, high is about the same as my fenix L0D's medium.
-about an inch longer than incan minimag
-no lanyard attachment pointBut then again, for $25 I'm not complaining.
Sorry to hear you're not happy with it, jzmtl. I'd take it back and exchange it for another, because you may have gotten a bad one.
Mine has a neutral white output - typical Rebel LED tint - not warm, but not bluish. Of course there is probably something of a tint lottery, but neutral white seems to be what most people have been getting.
Output on high should be around 60 lumens - mine lights up half of my backyard on flood setting.
Sounds like your light may have a misaligned LED/reflector assembly.
When it first switches on it should output a bright flood with a tiny hotspot (and a few artifacts in the beam.)
Continue turning the head another 45 degrees or so. That should direct most of the output into the hotspot, making it wider and a lot brighter. At this point the beam is kind of ringy with a darker area around the hotspot. No good for close up work, but the throw is impressive for a 2AA light.
If your light won't focus to a fairly bright spot, something is messed up and you should exchange it.
.
-
It came in a clam pack so I don't think walmart will be too inclined to take it back as it's not resaleable anymore. I suppose I'm just used to other high powered LED lights, so this seems not as good in comparison. It's definately not 60 lumen in high, as in ceiling bounce it's not as bright as my other light that's known to be 60, probably 40 or so on high. As for focus, mine can be focused into spot, but cannot be defocused for close up work like incan version.
I might go fishing later today if the wind dies down, I'll try it out.
@Black Rose said:
I'll trade ya. Mine has a reddish/pinkish tint.Hehe, with canadapost we might as well buy a new one for cost of postage.
-
@jzmtl said:
It came in a clam pack so I don't think walmart will be too inclined to take it back as it's not resaleable anymore. I suppose I'm just used to other high powered LED lights, so this seems not as good in comparison. It's definately not 60 lumen in high, as in ceiling bounce it's not as bright as my other light that's known to be 60, probably 40 or so on high. As for focus, mine can be focused into spot, but cannot be defocused for close up work like incan version.I might go fishing later today if the wind dies down, I'll try it out.
@Black Rose said:
I'll trade ya. Mine has a reddish/pinkish tint.
Hehe, with canadapost we might as well buy a new one for cost of postage.
Man, I feel kind of bad about recommending this light and then two of you guys buy them and get bad ones. Maybe Mag is sending its factory seconds off to Canada.
This isn't a light I'd recommend anyone to mail order, because the variability of the product seems high. Mag maybe needs to tighten up its manufacturing process a little.
I still think it can be a good buy if you pick one up in a Big Box store near home, then try it out and exchange it if you get one with bad tint, misalinged reflector, etc.
I picked up another at Lowes last week and it's very close in output and tint to my first example. Flood to spot focus works well on both of my examples.
Again, this light isn't for white wall hunters who want a perfect beam.
It's not a light I'd choose for outdoor activities because there are so many superior alternatives for not a whole lot more money.
I do think it'd serve most people well as a toolbox, general utility beater, or automotive light that can be purchased locally for a very reasonable price.
.
-
I can't wait to get the new one. Is it brighter than the first one?
-
@american lockpicker said:
I can't wait to get the new one. Is it brighter than the first one?It's definitely brighter than my first generation 2AA MMLED, which is about 40 lumens on fresh cells IIRC.
The first gen 3AA MMLED is around 55 lumens on fresh cells, IIRC but I no longer have one around to compare.
The 3AA is probably about the same output as the 2nd gen 2AA, working from memory.
Again, the 2nd gen 2AA lights don't offer tremendous output, being maybe 60 lumens (guesstimated by comparing to my other lights.)
They are more efficient than the 1st gen lights in terms of longer runtime.
They have a low setting which is useful for closeup work inside enclosures, computer cases, etc.
They have strobe and SOS settings which could be useful for emergencies, which is why I think they'd make good automotive lights.
.
-
@ringzero said:
Man, I feel kind of bad about recommending this light and then two of you guys buy them and get bad ones. Maybe Mag is sending its factory seconds off to Canada.This isn't a light I'd recommend anyone to mail order, because the variability of the product seems high. Mag maybe needs to tighten up its manufacturing process a little.
No worries, it's the nature of LED product, mag obviously doesn't want to pay for premium color bin, so they probably just said give us whatever you got.
-
@american lockpicker said:
Terralux has an LED upgrade for 2AAA.
Where can I find this 2AAA upgrade, AL?
Bright guy carries it. http://www.brightguy.com/products/Universal_LED_Lighting_Kit_(TLE-20).php
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login