The small blade?
-
Big for food, small for dirty stuff.
-
This plus a zillion or two!

One more here for the small blade for primary use. I use the main blade for food...and mostly to cut sandwiches and burgers at picnics and BBQs.
I think there should be more options for the the blades to be swapped. Small blades on the main blade side only need the proper spacer from the factory. I'd buy knives with a small blade and a pruner or electrician blade. Small + Pruner is on my list of upcoming mods now that I have a few donors in stock. What I'd really like is a gardener sized Hawkbill and the small pen blade.
-
I use the small blade mainly to open blister packs. Less chance to damage the item inside. Same applies to open packages, even though i mainly use the can opener on my wenger classic for that purpose nowadays.
-
I reserve the small blade for fine and intricate cutting, and keep it as sharp as possible.
I find the 84mm and 91mm large blades too small and too awkward for general food prep. The extra belly of the 85mm knives works much better for cutting and slicing on a board, but the blade is still often too short.
If I need a SAK for food prep I use a 111mm instead.
-
I feel another useless poll coming on but I'll spare you guys

-
I like to keep the edge bevel on the small blade ridiculously thin, around 6 degrees per side or less and hair-splittingly sharp. If used gently it makes a multitude of cutting tasks really easy.
If it touches your skin though, you bleed :ahhh -
DMT diamond hones for profiling and sharpening dullish edges and finish on a Spyderco ultra-fine ceramic that I lapped with a DMT fine hone to make it even smoother, crazy sharp.
-
One more here for the small blade for primary use. I use the main blade for food...and mostly to cut sandwiches and burgers at picnics and BBQs.
I think there should be more options for the the blades to be swapped. Small blades on the main blade side only need the proper spacer from the factory. I'd buy knives with a small blade and a pruner or electrician blade. Small + Pruner is on my list of upcoming mods now that I have a few donors in stock. What I'd really like is a gardener sized Hawkbill and the small pen blade.
How hard would it be to make a two layer with big+small and pruner+electrician with an awl on the back? That would be one heck of a lot of cutting utility in a small package.
-
@pomsbz said:
How hard would it be to make a two layer with big+small and pruner+electrician with an awl on the back? That would be one heck of a lot of cutting utility in a small package.Not hard at all with the right donor parts. Pre-'85 spring would be easiest and would only need the right spacers for both blades ~0.5mm for both sides. If a knife layer spring is used, then 1mm spacers could be used and the awl would need a ~0.5mm spacer too.
I think it would be a good knife...
-
@pomsbz said:
How hard would it be to make a two layer with big+small and pruner+electrician with an awl on the back? That would be one heck of a lot of cutting utility in a small package.Well, it wouldn't be SAK, but something like a Case Congress already packs four blades into one smallish knife. There are even a few 5-blade trappers and sowbellys floating around, but I believe they were all special runs.
-
@nate j said:
Well, it wouldn't be SAK, but something like a Case Congress already packs four blades into one smallish knife. There are even a few 5-blade trappers and sowbellys floating around, but I believe they were all special runs.True but these four blades are IMO a better overall package and of course you get the package of super stainless, easy to sharpen and great form factor.
-
I could live without the small blade BUT its sure nice to have when the right application ( as mentioned ) comes up

-
The doggone small blade. I say I would not miss it yet in some applications its nice. Looking over the usage of my small blade I can say with a bit more gusto that I would not miss it. My Wenger PTC or 58mm blade are far more precision. I am thinking the nail file would be best in place of.
-
Today I found the neighbour had chucked a chair out in front of their door. Totally collapsed but the wood was all unbroken. Just seperated at the joints. I knocked on and offered to put it back together for them, she's a single mother with 6 kids and I know money is very tight. Anyway back on topic, I used the little blade to cut and pry out the old glue and clean up the joints. It wasn't well put together to start with methinks and I needed to do a lot of work to get it all back together. It was dirty work, lots of old glue and lots of new glue all over the thing. Wipe off afterwards and still use the big blade to cut up buns and pickles for my hotdog supper.
-
@pomsbz said:
Today I found the neighbour had chucked a chair out in front of their door. Totally collapsed but the wood was all unbroken. Just seperated at the joints. I knocked on and offered to put it back together for them, she's a single mother with 6 kids and I know money is very tight. Anyway back on topic, I used the little blade to cut and pry out the old glue and clean up the joints. It wasn't well put together to start with methinks and I needed to do a lot of work to get it all back together. It was dirty work, lots of old glue and lots of new glue all over the thing. Wipe off afterwards and still use the big blade to cut up buns and pickles for my hotdog supper.Random kindness always is the best.

-
@pomsbz said:
Today I found the neighbour had chucked a chair out in front of their door. Totally collapsed but the wood was all unbroken. Just seperated at the joints. I knocked on and offered to put it back together for them, she's a single mother with 6 kids and I know money is very tight. Anyway back on topic, I used the little blade to cut and pry out the old glue and clean up the joints. It wasn't well put together to start with methinks and I needed to do a lot of work to get it all back together. It was dirty work, lots of old glue and lots of new glue all over the thing. Wipe off afterwards and still use the big blade to cut up buns and pickles for my hotdog supper.Nice work pomsbz!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login