PowerPint Overview Mighty Little MT
-

(I had to borrow this from ThePeacent.)I was born wrong.

-
@gerleatherberman said:
I had to borrow this from ThePeacent
I was born wrong.

@gerleatherberman said:
your line of sight.
:D
@Sam Lim said:
U can't even see where u are cutting.
-
Seriously...... Take a piece of paper, draw a line, cut with those mentioned left hand mini scissors, tell me is easy.

-
Admittedly, I am at a bit of an advantage. When I had all of those surgeries on my right arm, I had to learn to do everything with my left arm(even writing). The cool part is that I now have two equally capable arms/hands.





-
Amici,
I've been using the PP on and off for the past few weeks in between using the Juice, to see which is more useful and comfortable as a user. Here it is along with my Ernie mini 7, D25C-TI, and a 1930's repro zippo.Cheers,
Serge
-
Fantastic combo, Serge! Looking forward to reading your thoughts on the Pint and Juice.

-
2 essential mods for the PP for me. Idea borrowed from Sam
.- converted that useless "nibble" to a flat head screw driver
- filed down the back of the awl so it won't cut my finger accidentally
Scissors will be next, but I haven't found a suitable donor yet. More importantly, I don't feel my skills are ready for this yet


-
wow, that bottle-opener looks great, as if the tool came with it like that. Fantastic job.

-
roamingcat,
Good job and thank you for inspiring me to do some work on my Pint.
Made two different size flat drivers with the can opener and bottle opener. Used a fine wheel stone to get the sharp hollow-grind to make them bite. Did a similar mod to the awl that roamingcat did, where I lower the tip angle to avoid it catching my pocket/hand. Then used a hand diamond-file to file the back of the scissor spring where the spring tang touches the frame when engaged. Ground the semi-circle spring tip down to lessen the distance needed to squeeze. All in all the scissors are notably more functional(being easier to squeeze) and will be less likely to break(the spring doesn't exert as much force).
Used a sharpie to show how far I wanted to go.

After the grinding work on openers and awl.

Four good drivers now. :)

See how I moved the leaf spring out and up to work on it.
This is when I used the diamond-file to gently remove some tang-stop material.

Photo showing the new spring profile and position.

-
amazing how they can pack so many implement in such a small package. -
gerleatherberman,
This is amazing
, and thank you for sharing your excellent ideas and improvements it make to the PP (in particular the scissors)! Also, those excellent and clear photos certainly help me a lot to go ahead with mine.With these mods in place, imo the PP is well placed to become the best single EDC available today (at least for me), As I said b4, the PP has all the great design features I always wanted for an EDC. If we can collectively improve upon the few shortcomings in its execution by way of mods then we are all set !
-
@roamingcat said:
gerleatherberman,This is amazing
, and thank you for sharing your excellent ideas and improvements it make to the PP (in particular the scissors)! Also, those excellent and clear photos certainly help me a lot to go ahead with mine.With these mods in place, imo the PP is well placed to become the best single EDC available today (at least for me), As I said b4, the PP has all the great design features I always wanted for an EDC. If we can collectively improve upon the few shortcomings in its execution by way of mods then we are all set !
You're quite welcome, and thank you again for posting your mod.

Indeed, I think we can suss out some practical fixes for our Pints. The scissor work was primarily brought on by seeing several member's spring breaks. The fix is a bit of a pain-in-the-butt, but <u>will be worth it if it works out in the long run</u>. Right now I am involved in the Center-Drive challenge and may be participating in the Surge challenge next month, so won't be able to actually EDC the Pint for a while. However, I will try to brainstorm some ideas, in the rare event I have a complex thought.

-
Spoiler:
roamingcat,Good job and thank you for inspiring me to do some work on my Pint.
Made two different size flat drivers with the can opener and bottle opener. Used a fine wheel stone to get the sharp hollow-grind to make them bite. Did a similar mod to the awl that roamingcat did, where I lower the tip angle to avoid it catching my pocket/hand. Then used a hand diamond-file to file the back of the scissor spring where the spring tang touches the frame when engaged. Ground the semi-circle spring tip down to lessen the distance needed to squeeze. All in all the scissors are notably more functional(being easier to squeeze) and will be less likely to break(the spring doesn't exert as much force).
Used a sharpie to show how far I wanted to go.

After the grinding work on openers and awl.

Four good drivers now. :)

See how I moved the leaf spring out and up to work on it.
This is when I used the diamond-file to gently remove some tang-stop material.

Photo showing the new spring profile and position.

Great work.

Why did the openers not come like that!
-
@ReamerPunch said:
Great work.
Why did the openers not come like that!
Thank you, RP!

What is really crazy is that I only spent a couple of minutes grinding and smoothing the tools. A trained factory worker could have done the same thing in a few seconds(and a computerized machine could probably have ground hundreds at a time for a few seconds).

The tools have room for nail nicks as well. :-\ -
My mods so far (from left to right):-
- Bottle opener "nipple" converted to "large" flat head screwdriver/pryer
- Can opener "nipple" converted to "medium" flat head screw driver
- Hook cutter back sharpened for use as a scraper
- Back of awl filed down to minimize risk of cutting my finger when using main blade
- Filer tip converted to scraper
I want to thank all the posters in this thread for sharing their ideas. Very tempted to do the scissors mod too but want to practice more on my dremel skills first!
Very interested to see what mods other posters have done so far to their Pints too!
(Together, lets make it a Perfect Pint
)
-
@roamingcat said:
My mods so far (from left to right):-- Bottle opener "nipple" converted to "large" flat head screwdriver/pryer
- Can opener "nipple" converted to "medium" flat head screw driver
- Hook cutter back sharpened for use as a scraper
- Back of awl filed down to minimize risk of cutting my finger when using main blade
- Filer tip converted to scraper
I want to thank all the posters in this thread for sharing their ideas. Very tempted to do the scissors mod too but want to practice more on my dremel skills first!
Very interested to see what mods other posters have done so far to their Pints too!
(Together, lets make it a Perfect Pint
)That's alot of improvements from the original design RC!
I would really like to incorporate some kind of swing lock for the handles.. The pocket clip is on the wrong end and the handles keeps opening up in my pocket.. -
Sam,
Can you tighten the pliers mount screws anymore than they are(I know some SOG models have pins that are bottomed out)? That is how I got mine to stop opening in my pocket.
-
@gerleatherberman said:
Sam,
Can you tighten the pliers mount screws anymore than they are(I know some SOG models have pins that are bottomed out)? That is how I got mine to stop opening in my pocket.
But I like to flik the pliers open and bash my knuckles a little.. :D
-
@Sam Lim said:
That's alot of improvements from the original design RC!
I would really like to incorporate some kind of swing lock for the handles.. The pocket clip is on the wrong end and the handles keeps opening up in my pocket..Thanks Sam. Regarding the lock for the handles, would cutting a notch out of the lanyard ring and right handle (as per diagram) work?
Also, how straight forward is it when reassembling the springs? Does it require any 'tricks' like the LM Juice to put the springs back in place?
Thanks.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login