Any Jeepers out there?
-
Nice haul!
I need to put new wipers on my Jeep- I am terrible when it comes to replacing wipers. They clean the window okay, but they make such horrible noises...
Def
-
@Grant Lamontagne said:
Nice haul!I need to put new wipers on my Jeep- I am terrible when it comes to replacing wipers. They clean the window okay, but they make such horrible noises...
Def
I have gotten into the habit of replacing them once a year (or twice if needed).
I usually just buy the cheapest ones they have, those high end ones from Borsch I have found to be a total waste of money. They don’t clean the windows better and I have found them to only last about 6 months more than the cheapest ones, and at €80 vs €5 a piece it really doesn’t make sense to get the high end ones.
The only time I have seen a huge difference, is in extreme cold weather, the cheap ones flexing mechanisms tend to freeze and get stuck, so they don’t wipe the window fully. The high end ones doesn’t seem to have this problem
But that’s just my opinion
Sent from my iPhone using Tapatalk
-
I used a patch from a company called MastaPlasta to patch a giant hole in my drivers seat.
Not sure how I feel about the result, but it’s better than before regardless
Before:

After:

There was also a wear hole in the door cart that I used the remaining on.
Before:

After:

I am no interior guy, and I don’t care to spend 1000+ dollars / euros on a reupholstery on a Jeep with 325.000 km on it that I paid around €1200 for.
This patch was €20 with shipping, and it’s way better than before now.
Let the hate begin!
Sent from my iPhone using Tapatalk
-
Looks perfectly fine to me.

Great job! If anyone else doesn't like it, feel free to have it properly reupholstered and send them the bill!
Def
-
Installed a new wiper motor and wiper arm today ...and removed the ugly and fainted dealer decal and license plate frame
I don’t have a proper “Before” picture, but you get the idea:

After:

And don’t worry; I will do something about those ugly and dated 80s looking auxiliary reverse lights, I have a set of LED reverse lights in the mail.
...and yes I know my Jeep needs a wash [emoji27]
Sent from my iPhone using Tapatalk
-
@MMR said:
Installed a new wiper motor and wiper arm today ...and removed the ugly and fainted dealer decal and license plate frameI don’t have a proper “Before” picture, but you get the idea:

After:

And don’t worry; I will do something about those ugly and dated 80s looking auxiliary reverse lights, I have a set of LED reverse lights in the mail.
...and yes I know my Jeep needs a wash [emoji27]
Sent from my iPhone using Tapatalk
Nice progress! And it's a jeep.. It's to clean [emoji6]
[It's not failure if you learn something from it]
-
Installed some LED license plate bulbs and front side marker bulbs

Hard to take a picture of, but this is the closest to how it looks irl:

I am not sure how I feel about the blue’ish light they give in the front marker lights....I might swap them for some yellow ones instead...idk we’ll see
Sent from my iPhone using Tapatalk
-
@kottskrapa said:
Nice progress! And it's a jeep.. It's to clean [emoji6][It's not failure if you learn something from it]
It’s actually a lot dirtier IRL that it looks in the pictures [emoji846]
Sent from my iPhone using Tapatalk
-
Replaced the tired and dated looking 1980s auxiliary reverse lights with some more discreet LED lights.
Before:

After:

Close ups:


Can’t wait to test them out later when it gets dark, they seemed extremely bright on my test bench, so hopefully they will perform well on the Jeep...
....otherwise FML!!!
UPDATE:


Sent from my iPhone using Tapatalk
-
Very cool!
I need to upgrade the reverse lights on my Jeep. I upgraded the reverse bulbs in the tail lights to LED's but they aren't bright enough. I would eventually like to put some recessed LED lights into the rear bumper, but I will wait until I have a new bumper to do it in.
Def
-
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
If that's the case, no wonder mechanics charge a minimum three hours! :ahhh
Def
-
So I did a thing a couple of weeks ago. I painted my Jeep Desert Tan. it was a ton of work, but I think the results were worth it. Now let me see if I can get some pictures upload...
-
See if this works...
-
If anyone has any interest, you can have a look here for more pics. :)
https://wranglertjforum.com/threads/my-05-rubi-build-and-picture-thread.1022/page-20#post-366630
-
A few comments about the 4.0: this was the last iteration of the Rambler I6 engine that was introduced in 1964 as a 232. There was a 199 cubic inch version produced from 1965-1970, and AMC introduced the 258 in 1970. The 232 and 258 were both produced through the '70s. 1979 was the last year of the 232, but the 258 continued to be produced for another 10 years. It was joined by the 242 (4.0) in 1987. The 4.0 has a shorter stroke and larger bore than the 258.
Some people have actually put a 258 crankshaft in a 4.0 block for a 4.5l engine. This was really nothing new since AMC's Mexico plant built a 282 cubic inch version from 1971 through 1986. It used the 258 crankshaft with a larger bore; pretty much the same thing as a 258 crank in a 4.0 block.
Jeep used these Rambler I6 engines starting in at least 1966; I've read that Jeep used them right from the beginning in 1964. I don't really doubt it but can't say for sure, since I had a 1965 Wagoneer with the OHC Tornado 230 I6 engine as stock.
Anyway, the Rambler 6 was the most common engine in both Jeeps and AMC cars through the '70s and '80s.A buddy of mine once worked for a distributor of used major auto assemblies. Not a junkyard; this was actually a warehouse with high racks full of engines, transmissions, axles etc. He told me that the 4.0 was the cheapest to buy engine they had because there was essentially no demand for them. They had a steady supply from wrecked Jeeps, but it was uncommon for a 4.0 to fail, thus little market for replacement engines.
I wonder if I can shoehorn one into my JKU...

-
Since this one is back up, here's a pic from our recent trip. :D
Def

-
Well I can happily say that my TJ will no longer be my daily driver. I'll be getting an 05 Nissan Altima from a buddy of mine for a good price (since I'm helping him work on it). Last night we replaced the subframe as it had a large hole in it (was there when he bought it, but it was covered up), and tomorrow we're going to replace the front wheel bearings. Once that's done it'll be good to go. :)
It'll be nice not having to worry about breaking anything on the Jeep when off-roading, and having something that'll make a MUCH better family vehicle.
-
Has anyone heard about the current fad of "ducking" Jeeps?
It actually started here in Canada, and you can read about it here: https://driving.ca/jeep/auto-news/news/jeeps-are-being-ducked-and-it-all-started-in-canada
Megan got me some rubber ducks last week and I ducked my first ducking yesterday. We were driving through a provincial park and I spotted a red 2 door Jeep Wrangler, so I stopped and put a little rubber ducky on it. :D
Anyone else ducking Jeeps or been ducked yet?
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
