Appreciating the boxcutter/utility knife
-
Last ones for now:
#1 A group of Gillette utility knives with extra blades.
#2 A group of small utility knives.
#3 A pair of Stanley 10-049 folding utility knives.The blade release is effected by sliding the plastic tab on the back to the rear.
#4 A Stanley 10-059 funny folder knife.



-
Cool collection

-
:D

-
Always had a thing for the Olfa cutters too!
Back when I installed Tint and Security Film these were all we used.
Sent from my iPhone,dont expect too much[emoji85]
-
@CallsignBadger said:
Thats lame >:(Good thing you got it changed
I also have the blue one on the bottom of the second pic. Mine is branded Sheffield


My blue one is also a Sheffield.

-
@Ray S said:
As with most types of edged tools,the lowly box cutter has also come into my accumulation in many designs.Some are designed for multiple uses such as scraping. It wasn't until many years after I started using a standard box cutter did I realize that in most of them you can take out the blade and turn it 90 degrees to use as a scraper.
The only down side I see to replaceable blade utility knives is that most of them use blades that will only fit that particular knife.Many of the early ones used single edge razor blades of the standard type. There were also many types of single edge razor blades when safety razors started to replace straight razors but that is another story......
So without further ado I will post up a few of mine and try to give info about them.#1 Armstrong Notched Blade Knife.Cast iron housing.Still looking for extra blades.
#2 Box cutter promotional item from Swift's Cleansers.Uses a single edge razor blade.
#3 Conrad box cutter uses a single edge razor blade.Has a ruler built in to the top edge.
#4 A modern Craftsman folding utility knife with wood handles and highly polished with removeable blade guard.
#3Ray, I was a flooring installer for 33 years. The Armstrong knife you have has been replaced by a plastic angled model. At one time they made an angled straight blade for it that ship has sailed. If I remember right the notched blades for the new knife fit yours. When pattern cutting sheet vinyl flooring you cut halfway through the flooring and undercut the backing with a notched knife like yours. Mostly used with inlayed hard goods but can be used with any vinyl flooring. Most wholesale flooring supplys should stock Armstrong blades.
-
@Mike 56 said:
Ray, I was a flooring installer for 33 years. The Armstrong knife you have has been replaced by a plastic angled model. At one time they made an angled straight blade for it that ship has sailed. If I remember right the notched blades for the new knife fit yours. When pattern cutting sheet vinyl flooring you cut halfway through the flooring and undercut the backing with a notched knife like yours. Mostly used with inlayed hard goods but can be used with any vinyl flooring. Most wholesale flooring supplys should stock Armstrong blades.Mike:Thanks for the info on the Armstrong. I'll have to check to see if I can find any locally.
-
I've got a Gerber EAB which I never use....just had my name on it :P
I use the old standard Stanley model, one fixed and one with the retractable blade. The latter is a pain, I always seem to disengage the lock during hard use.....
Something else.......if you have a polisher you can strop the blades back to sharper than new in a few seconds.
-
Ray, I found some Armstrong blades in my linoleum box. If you live in the states PM me your address and I will send you a few.
-
Only a few here.
Cheapo plastic Stanley (model not known). Good for light work and quick blade changes.
Stanley 99E. Will easily outlive me. Good solid beast of a knife. Slow on blade changes though.
Forge steel auto-retract (pain in the arse to use for anything other than single cuts). No additional tools needed to open it, which is good. Solid enough to survive being thrown across the room, if you lose your rag over the auto-retract feature. Launch durability tested many times.
And then both the EAB and EAB Lite. Sadly the concave and convex blades need modding slightly to fit. Not a long job though, if you've got some kind of powered grinder.

-
I bought a Gerber folding utility knife from Amazon just got it today feels real good in my hand. Walmart sell them with orange handles for under eight dollars when you can find them in stock.


Sent from my iPhone using Tapatalk
-
@Mike 56 said:
I bought a Gerber folding utility knife from Amazon just got it today feels real good in my hand. Walmart sell them with orange handles for under eight dollars when you can find them in stock.

Sent from my iPhone using Tapatalk
I saw one of those yesterday, there were other models too. Almost got one! :ahhh

I appreciate having a box cutter at hand, or any kind of cheap and easily replaceable blade on me, including utility knives and scalpels!



-
AimlessWanderer
Can you compare the EAB and EAB lite in terms of ergos? I've seen tons of reviews. Now I know that I need one. But the thing is that I like the liiks of the plane jane EAB more. But at the same time EAB lite is an improved version and should be better. Just don't like that coffin shape :-\
Alex
-
@wind-catcher said:
AimlessWandererCan you compare the EAB and EAB lite in terms of ergos? I've seen tons of reviews. Now I know that I need one. But the thing is that I like the liiks of the plane jane EAB more. But at the same time EAB lite is an improved version and should be better. Just don't like that coffin shape :-\
Alex
Welcome to MTO, Alex

Tricky one to answer, as the ergonomics in my hands, will be different to yours, so take my reply with a large pinch of salt. :)
To be honest, if held as you might expect to with a normal grip (pics 1&2), neither are very comfortable in my hands, particularly on heavy cutting. I tend to use them for lighter tasks than I would with the big Stanley, and hold them by pinching the side (pics 3&4). Both knives feel near enough the same that way, ergonomically speaking, or neither feels particularly better/worse than the other. Fine for cutting through leather, but if you're cutting through carpet, get a Stanley ;)




-
I have the lite only because that's what the local Lowes sells. I didn't think there would be much difference between the regular and lite, except looks.
They are handy for sure. -
@ThePeacent said:
I appreciate having a box cutter at hand, or any kind of cheap and easily replaceable blade on me, **including utility knives and scalpels! **
Good call!
I forgot those

-
AimlessWanderer
Thank you, Sir!
I will, probably, get both and make up my mind. I'm just tired of sharpening my working knife (Para2). Its not the knife that's bad. I just often have to use my knife for a non knife tasks. So its kinda a lil stupid abusing a good knife.
-
I've always had a soft spot for replaceable blade knives and have collected a few examples over the years.
Specifically ones that take standard blades, with multiple available blade shapes and plenty of suppliers.While I have a number of knives that take other types of blades, these three have been my main focus:
Trapezoidal Utility Blade (also known as a Box Cutter or Stanley Knife),
The larger Scalpel Blade, suitable for the #4 sized handle,
And the smaller Scalpel Blade for a #3 handle.Utility Blade:

Left - Top to Bottom
Ronin Energetics - Praetor
Ronin Energetics - Helion Flip
Chadwick Parker & Joe Huang - TPT Slide
Gerber - EAB
Paper Knives E.D.C
Titaner - Titanium Safety Portable Multi-Knife
AtuMan - K1Right - Top to Bottom
Jewel Blade - KNI100 Pro Fold
Giaco Whatever - Maker Knife
Titaner - Twilight Blade
Superknife - Utility Folder
WorkPro Utility
Magnus - SlideClick
Magnus - TiCut
Michael Sargent - Ti Splice#4 Scalpel

All these were bought from Aliexpress
From Top to Bottom
Blue anodised Titanium.
Stainless Steel Slip Joint. This one had terrible blade fit, as it doesn't have a raised section, that the rear of the blade is meant to sit on. I had to pack it out with some adhesive plastic strip.
The last four are auto OTFs. I haven't put blades in them as that may well then make them illegal to own here.
I'm surprised that they all operate flawlessly, considering what I paid for them. I opened one of them up to try and understand how the mechanism works and it's a really elegantly thought out system.#3 Scalpel

From Top to Bottom
Some kind of dental tool, with an adjustable angle head. Fairly crude.
QianLi - Carbon Fibre. Very rough finish.
Swann Morton - #3 Retractable.
Blue anodised Titanium. This one also had poor blade fit for the same reason as above.
Swann Morton - #3 Stainless. I also have a brass version which I prefer.
Titaner - FalconI have some other replaceable blade tools that I'll post soon, along with some more of these types, as I found some really interesting stuff on Aliexpress and Temu.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
