What Is Your Latest Knife?
-
Congrats Greg !

-
Just got this PAL Jacknife. It's going to need some work on the back springs and tangs as it's a nail breaker but it's got nice full blades.

-
@Greg Jones said:
I've wanted this Grohman for a while, today I finally did itThat's rather elegant

@SteveC said:
Just got this PAL Jacknife. It's going to need some work on the back springs and tangs as it's a nail breaker but it's got nice full blades.And that looks a brute! What size is that, Steve?
-
@AimlessWanderer said:
And that looks a brute! What size is that, Steve?It's 3.5" closed
-
The main blade spring sits proud in the closed position a bit so I may grind some off to ease the tension a bit.
-
Nice knife Steve

-
Nice knives in this topic

And thanks for noticing and commenting on mine, I haven't had a traditional folder in probably 40 years, and I can't put this one down -
@gustophersmob said:
Do you disassemble the knife to grind the back springs?
No, l ground them in place.

-
Great job Steve

-
The main blade backspring was sitting around .5 mm proud when closed and the pen was flush. I took the main backspring down so it was flush with the other backspring. I also rounded both tangs quite a bit which helped a lot in the opening. It was still a bit stiff on both blades so I slowly and carefully took more off both backsprings from the center rivet out to the bolster on my belt sander. I took a little checked, sanded a bit more until I got it where I wanted it.
-
Great work and idea thanks Steve

-
@SteveC said:
The main blade backspring was sitting around .5 mm proud when closed and the pen was flush. I took the main backspring down so it was flush with the other backspring. I also rounded both tangs quite a bit which helped a lot in the opening. It was still a bit stiff on both blades so I slowly and carefully took more off both backsprings from the center rivet out to the bolster on my belt sander. I took a little checked, sanded a bit more until I got it where I wanted it.Ah, that makes sense. Thanks for explaining it

I imagine taking material off the tang takes a steady hand.
-
Congratulations David,Steve and Greg.
Here is another Case Trapper titled The Beast.It has five blades representing the different type of blades that case has installed into the Trapper series over the years.This is also notable because Case incorporated a "cigar band" into this Beast.
As with almost all of my knives,I took it into the shop and removed all of the machine marks on the back springs and then polished them to a mirror finish.The first picture of the back springs show the dull finish,unfortunately the resolution wasn't sufficient to show the machine marks left over from the manufacturing process.
The second picture of the back springs was difficult to capture because of the reflections created by the finish.
-
Nice work toolguy excellent job on the polishing

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

still a nice looking knife though, Steve. What's the plan with the backsprings?