PowerPint Overview Mighty Little MT
-
@gerleatherberman said:
:o
Very very cool, RC!
What kind of magnet did you use for the mod?
For the Pint, I used one 10 x 1mm round magnet. For the LM Wave, I used 2 small 3 x 1.5mm round magnets. I applied double-sided adhesive tape to one side of the magnet to secure it from moving. These are very strong magnets, together with the double-sided adhesive tape I find it very secure and greatly minimize the risk of loosing it.
If you cannot find some spare magnets already stuck on your fridge that you can use, you should be able to source some from your local hardware store or from Amazon. Just do a search for, say, 1mm magnet and there are plenty of choices of many different shapes and sizes.
I am quite happy with the result as it requires almost no effort to fix the issue of the loose handles from opening up.

-
Thanks for the explanation, RC!

-
Thanks for the explanation RC!
Great to know that other members are trying to improve on this little but mighty MT. 
I thought up with a mechanical solution for this. A locking latch, beta stage. It somewhat resembles a horse head..
but works wonderfully.Down side, the tools on the swinging latch side cannot open when the latch is engaged due to the locking tab cannot extend backwards. No biggie. The latched side open with no issue.
Pics below on how it latches.
Latch click into place.


I have to modify a thicker washer with thinner "walls" to allow the latch to enter.


Latched side, tools deploys no issue.

For now, when unused, it disappears into the frame so I have to open up the other tools to dig it out. Doesn't really bother me yet.

Where this part came from? The clip is not tempered and can bend to ridiculous shapes without breaking. Using the larger hole for the pivot. I hate drilling... :P


-
Wonderful solution, Sam!

Looks like how SOG should have done it at the factory. I like it better than the PowerLitre latch, and I like the PowerLitre latch.

-
@gerleatherberman said:
Wonderful solution, Sam!
Looks like how SOG should have done it at the factory. I like it better than the PowerLitre latch, and I like the PowerLitre latch.

could u snap a pic for the latch on the PL? I can't see it on all the stock photos. 
-
It is somewhere in the photos I took for this thread.
/post/1777635
-
@gerleatherberman said:
It is somewhere in the photos I took for this thread.
/post/1777635
Just saw that!
thanks! Is that plastic? -
Great work as always, Sam!

-
@ReamerPunch said:
Great work as always, Sam!
fun things to do! -
@gerleatherberman said:
All metal. But, what kind of metal? I am not sure.
Feels sturdy though. :)
all along I thought that was a foil cutter.. 
-
Great work Sam, and thank you for sharing !
Can you tell us a little bit more how you converted from the clip to the latch? Did you have to cut out/ fabricate the metal clip to the shape of the latch, and if so, how did you do it? Or if I misunderstood it completely for which I apologize ! -
@roamingcat said:
Great work Sam, and thank you for sharing !
Can you tell us a little bit more how you converted from the clip to the latch? Did you have to cut out/ fabricate the metal clip to the shape of the latch, and if so, how did you do it? Or if I misunderstood it completely for which I apologize !Yes u are right! Its a cut out from the clip. I have a strange habit of using weird things...
Flatten the clip first, fit the larger hole into pivot. Stare at it for a while. Using the standard eyeball gauge, go trigger happy with the dremel.
-
Thanks for the pic, Sam.
I hope SOG has been following this thread.
-
Thank you Sam

I think this forum should send SOG a bill for "Professional Advice for Product Improvement for the Pint" !
If SOG can release a Pint version 2 with all the improvements as noted above I think it would become a killer EDC. I am happy to purchase it again, even if they have to charge a little bit more.
-
@roamingcat said:
Thank you Sam
I think this forum should send SOG a bill for "Professional Advice for Product Improvement for the Pint" !
If SOG can release a Pint version 2 with all the improvements as noted above I think it would become a killer EDC. I am happy to purchase it again, even if they have to charge a little bit more.
They didn't think though the design.. The power access was right in all ways. Pocket clip on the right end and the lock tabs are recessed. Whoever designed the pint made the same mistake for deluxe, play and grab..

-
@ReamerPunch said:
Thanks for the pic, Sam.
I hope SOG has been following this thread.
pretty sure someone from there is in here. Stalking.. 
-
I've put together a mini bit kit to extend the capability of our nimble Pint.


-
@roamingcat said:
I've put together a mini bit kit to extend the capability of our nimble Pint.Very nice setup, roamingcat!

-
Thank you GLBM ! I am working on your scissors mod for the Pint, hopefully I'll get there soon

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login