The Hacked Leatherman Owners Club.
-
Nice HG.

-

So what all did you do in this mod
I believe it is bi-colored but it is a bit hard to tell in the pics 
-
So what all did you do in this mod
I believe it is bi-colored but it is a bit hard to tell in the pics 
So it is noticably different from the bicolor model for a number of reasons. As far as internal tools are concerned I used large spaces on one side to accomidate a modified bit driver after I cut out the sides. On the other side I need to drill a small hole through the bit driver in a specific location (still working it out) so that I can lock a series of T-shank bits and blades in there in addition to the normal tools.
Eventually I should have:
1/4" bit driver (straight blade side)
AWL
Hybrid bit driver-
*takes leatherman bits
*takes T-shank blades (locks in with small clip or even a paper clip)
*takes exacto blades (using simple adapter)And once I get a 91mm Vic scissor I can begin working on replacing the serrated blade.
So this is a work in progress but I wanted to see how it looked before I finished it. I also want to gently grind down the lock connections so that I can close it one handed, not just open it one handed.
Cheers,
HG -
I like the bi-color part
Hope that the 1/4 inch bit holder works out the way you want and you can get some 91mm Vic scissors in 
-
Today's carry and the 1/4 inch driver mod. Thank God for a Dremel tool.
Cheers,
HG -
That is great
but I hope that cutting the notch didn't compromise the strength of the bit driver :ahhh keep us updated on how this particular mod holds up
if it does then AWESOME :D if not then........... 
:D
-
@Poncho65 said:
That is great
but I hope that cutting the notch didn't compromise the strength of the bit driver :ahhh keep us updated on how this particular mod holds up
if it does then AWESOME :D if not then........... 
:D
I can tell already that it is substantially weaker, but does work for all buy stubborn screws and a hard crank. For me that's not acceptable. So I'll try a different solution.
-
My halfBlast suffered some mods, added a Tshank for longersaw.

-
Nice one Raoul

-
-
I used the pliers pivot from the Blast, was same diameter as the Surge T-shank . Just had to grind the Tshank , in order to open-close normally. Pics will follow
-
Pics




-
Nice work Raoul great idea

-
I appreciate the pics Raoul
A very cool mod and looks like a good toolset as well 
-
Got a lot of goodies in the mail this weekend including a Sidekick and Wingman. I realized very quickly after disassembling the Sidekick that the pocket clip perfectly fit over the Kick's clip hole. All I needed was to drill a hole in the frame..

But of course I couldn't stop there so I added some parts from a BO Blast and a full Rebar plier head...
I call it the Knifeless K-Bar

This might actually be my new favorite carry for my Job, since its really not a knife friendly place.
Cheers,
H.G. -
Nice

-
-
Well... It is not a mod, more of an adition.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
