Leatherman Free P2/P4 Club and Feedback Thread
-
Congratulations Top-Gear on obtaining the P4.
Or, did lovely Bride score that for you?
It is my impression that you have one fantastic partner who understands your passions and supports your hobby.
Now I am slightly jealous[emoji31]
Sent from my iPhone using Tapatalk
-
Perhaps the Free and the grey sheath are very loyal and don't like to cheat on each other.
-
@Top-Gear-24 said:
Edit: Just tested it again and with two hands I can close the snap-button. And I'm quite sure that when I leave it in for a couple of days it will get easier to do, maybe I should get out my camera and tripod and do a new Youtube clip
.If wet the black nylon and then fit it over the P4 and snap it shut, heat with a blow dryer it should then stretch and fit will going forward.
I would like to know if the P4 would fit tightly in a ST box style sheath. The length should not be problem, but, the width maybe.
Sent from my iPhone using Tapatalk
-
[quote author=Top-Gear-24 link=topic=81316.msg1922238#msg1922238 date=1556392862]
Here's the first thing I tested ...
Video not worky

-
@Monrogue said:
Ok, here is a pic of my P2 clipped in front right pocket.
Sent from my iPhone using Tapatalk
Thanks for the picture of the tool pocket riding with clip. Much appreciated.
Is the clip removable?
Does it hinder the feel at all when holding either the P2 or P4?
I liked the clip on my Wave as an option to carry, but not when using the tool, the clip just felt in the way to me!
Sent from my iPhone using Tapatalk
-
-
@LoopCutter said:
He may have taken it down, to update it since he did finally get it to snap shut. Maybe!Sent from my iPhone using Tapatalk
I changed it so that only people who had the link could see it, at least that's what I thought I did. But apparently I made it private...

It should be fixed now
. -
@LoopCutter said:
Congratulations Top-Gear on obtaining the P4.Or, did lovely Bride score that for you?
It is my impression that you have one fantastic partner who understands your passions and supports your hobby.
Now I am slightly jealous[emoji31]
Sent from my iPhone using Tapatalk
Thanks for the kind words mate
.I didn't expect the Free P4 here until August or so (that's the date one of the websites where I normally buy my stuff gave me). So I was quite surprised to see it available on the site of a local outdoor store franchise.
And when I showed it to my wife she probably already knew where this would lead to... So she just saved me and herself a couple of hours (days) of beating around the bush... :D
That's what 25 years together will do to you :D.
-
Has anyone found a good horizontal sheath for these? I want a P4 but without a sheath that carries the way I’d like it’d be a waste.
-
@Top-Gear-24 said:
Thanks for the kind words mate
.
~
That's what 25 years together will do to you :D.You are most welcome!
I know she is special, as you have share in other discussions. And I recall you meeting Tim Leatherman with the kids and pictures you shared. A good family bond.
Also, I have a special one as well[emoji6][emoji106]
This Friday, will be our 44th married + 2 yrs getting to know one another.
I know, Off-Topic! Carry on.
Sent from my iPhone using Tapatalk
-
@Monrogue said:
Whoa you got one already? How do you like it?I like it, and fit and finish seems to be great but...
Do I think it's such a game-changer as Leatherman and others claim it is? No...
The locking mechanism is not as easy as it looks, at least not to me (maybe more fiddling is needed).
I also don't like the fact that they changed the position of the serrated knife compared to the Wave/Surge tools.
The tools on the awl side are very thin, I'm not saying this is going to be a problem, but they do feel a bit flimsy (if they should turn out to be easily damaged, there's always Leatherman famous warranty, and since I purchased it through an official Belgian dealer the Belgian Leatherman importer should help me with that without extra cost this time ::)).
But I don't want to sound too negative, because I've been playing with it all day and it is fun, and I do like it, but not so much that I'm going to put my Wave in the drawer and forget about it. In all honesty, If I could keep only one tool it would probably be my Surge or my Swisstool, not the Wave or the Free P4.
Just my 2 cents at this time, I haven't put it to work really, except for using the scissors and the Phillips two times.
-
@LoopCutter said:
You are most welcome!I know she is special, as you have share in other discussions. And I recall you meeting Tim Leatherman with the kids and pictures you shared. A good family bond.
Also, I have a special one as well[emoji6][emoji106]
This Friday, will be our 44th married + 2 yrs getting to know one another.
I know, Off-Topic! Carry on.
Sent from my iPhone using Tapatalk
Yep, meeting Tim Leatherman was special for all of us, and he did seem to appreciate the fact that my whole family was there and they all shared my tool/brand enthusiasm.
Congrats on finding such a good Misses yourself mate, 46 years together :o.

-
For those of you that have gotten your Free series tools already, can you open the implements with leather work gloves on?
From what I've been reading it sounds like you can actually use everything one handed (which is enough of a selling point for me to buy one) but I was curious if they work with gloves. I may give the P4 a shot at replacing my ST300 for work EDC. Thanks!
-
@Brock O Lee said:
How is the Free’s hand comfort when pressing down in pliers mode, compared to the Charge/Wave/Rebar?The lock release tabs seem like a possible hot spot?
I also see 2 strange little nubs sticking out of the handle in the grip area?

I have mid-large hands and do not feel the little alignment 'nubs'. The lock tabs don't present themselves to my hands when gripping, but some people grip it differently. I'll get some grip pics up in a bit.

@clown said:
For those of you that have gotten your Free series tools already, can you open the implements with leather work gloves on?From what I've been reading it sounds like you can actually use everything one handed (which is enough of a selling point for me to buy one) but I was curious if they work with gloves. I may give the P4 a shot at replacing my ST300 for work EDC. Thanks!
The long tools would be workable OHO with gloves, but the smaller tools may take some technique to use with gloves one-handed.

@Top-Gear-24 said:
I like it, and fit and finish seems to be great but...Do I think it's such a game-changer as Leatherman and others claim it is? No...
The locking mechanism is not as easy as it looks, at least not to me (maybe more fiddling is needed).
I also don't like the fact that they changed the position of the serrated knife compared to the Wave/Surge tools.
The tools on the awl side are very thin, I'm not saying this is going to be a problem, but they do feel a bit flimsy (if they should turn out to be easily damaged, there's always Leatherman famous warranty, and since I purchased it through an official Belgian dealer the Belgian Leatherman importer should help me with that without extra cost this time ::)).
But I don't want to sound too negative, because I've been playing with it all day and it is fun, and I do like it, but not so much that I'm going to put my Wave in the drawer and forget about it. In all honesty, If I could keep only one tool it would probably be my Surge or my Swisstool, not the Wave or the Free P4.
Just my 2 cents at this time, I haven't put it to work really, except for using the scissors and the Phillips two times.
Just to clarify, I don't think any of us think it is a game changer. Not that I know of anyway. I am a bit dense sometimes.
The lock system is really easy for me, but mainly because I got accustomed to it during the PowerAccess challenge. It also uses lock tabs that pull away from the pivot. Give it a week and it should be easier. Hypothetically anyway. :ahhh
I thought the same about the thinner tools, but then realized I have done some crazy smurf with the big driver on the Wave, which is kind of thin. And with the large flat driver/pry tool on the P, I wouldn't need to use the other tools for prying. Time will reveal the outcome of the thin tools though. :)
I'd keep the Surge too, if only one tool could be kept. It is damn near indestructible.
I like the P scissors, but still think the 91mm scissors on the Swisstool(not the silly scissors on the smaller spirit) are better. The P scissors could probably cut thicker material, but the 91mm vic scissors are so much better cutting thin material, and thin material is a majority of my cutting tasks.
-
@LoopCutter said:
Thanks for the picture of the tool pocket riding with clip. Much appreciated.Is the clip removable?
Does it hinder the feel at all when holding either the P2 or P4?
I liked the clip on my Wave as an option to carry, but not when using the tool, the clip just felt in the way to me!
Sent from my iPhone using Tapatalk
It is removable by the looks of it. I actually like it in the position it’s in as it is a place for my thumb to rest in plier mode.
-
@Top-Gear-24 said:
I like it, and fit and finish seems to be great but...Do I think it's such a game-changer as Leatherman and others claim it is? No...
The locking mechanism is not as easy as it looks, at least not to me (maybe more fiddling is needed).
I also don't like the fact that they changed the position of the serrated knife compared to the Wave/Surge tools.
The tools on the awl side are very thin, I'm not saying this is going to be a problem, but they do feel a bit flimsy (if they should turn out to be easily damaged, there's always Leatherman famous warranty, and since I purchased it through an official Belgian dealer the Belgian Leatherman importer should help me with that without extra cost this time ::)).
But I don't want to sound too negative, because I've been playing with it all day and it is fun, and I do like it, but not so much that I'm going to put my Wave in the drawer and forget about it. In all honesty, If I could keep only one tool it would probably be my Surge or my Swisstool, not the Wave or the Free P4.
Just my 2 cents at this time, I haven't put it to work really, except for using the scissors and the Phillips two times.
I hear you on your points. It won’t completely replace my Wave either, but it certainly will be a top tool in my “rotation”. Also I can one hand open my Wave’s pliers, although it’s not as enjoyable as the Free’s. I’m happy having a OHO knife and pliers, so the Wave fits too, and it has the diamond file. So yeah, overall the Wave may edge out the Free in that respect, but the P2 fits me perfectly well for my needs.
-
This is NOT a photo!

I may have gone a bit overboard on how much detail I ended up putting into my 3D model of the Free P4. I did it as sort of skill building exercise.
I photographed each component, and along with calipers modeled each one from scratch in Solid Edge. The render was done in Keyshot.I will use the model to plan a few forthcoming mod ideas, as well as a form fit holster design.
Click for the 4K wallpaper size -
AMAZING modeling/rendering, ZapWizard! :o

It really does the quality of the P2/P4 justice.
-
O.K. I have been enjoying the P4 since I got it a few days ago. But, one thing has made me feel like the P4 was a bit too 'alien'(for lack of a better word). So, I got brave and tightened the screws that mount the pliers head. Just a tad, but the results are great. The tool feels a bit sturdier and the 'click in' of the pliers feels nicer to me. If you haven't dealt with loctite before, and want to tighten/loosen P series pivots, please go read the threads about it on the forum. Nobody likes a stripped out screw/post. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
