Leatherman Free P2/P4 Club and Feedback Thread
-
Has anyone found a good horizontal sheath for these? I want a P4 but without a sheath that carries the way I’d like it’d be a waste.
-
@Top-Gear-24 said:
Thanks for the kind words mate
.
~
That's what 25 years together will do to you :D.You are most welcome!
I know she is special, as you have share in other discussions. And I recall you meeting Tim Leatherman with the kids and pictures you shared. A good family bond.
Also, I have a special one as well[emoji6][emoji106]
This Friday, will be our 44th married + 2 yrs getting to know one another.
I know, Off-Topic! Carry on.
Sent from my iPhone using Tapatalk
-
@Monrogue said:
Whoa you got one already? How do you like it?I like it, and fit and finish seems to be great but...
Do I think it's such a game-changer as Leatherman and others claim it is? No...
The locking mechanism is not as easy as it looks, at least not to me (maybe more fiddling is needed).
I also don't like the fact that they changed the position of the serrated knife compared to the Wave/Surge tools.
The tools on the awl side are very thin, I'm not saying this is going to be a problem, but they do feel a bit flimsy (if they should turn out to be easily damaged, there's always Leatherman famous warranty, and since I purchased it through an official Belgian dealer the Belgian Leatherman importer should help me with that without extra cost this time ::)).
But I don't want to sound too negative, because I've been playing with it all day and it is fun, and I do like it, but not so much that I'm going to put my Wave in the drawer and forget about it. In all honesty, If I could keep only one tool it would probably be my Surge or my Swisstool, not the Wave or the Free P4.
Just my 2 cents at this time, I haven't put it to work really, except for using the scissors and the Phillips two times.
-
@LoopCutter said:
You are most welcome!I know she is special, as you have share in other discussions. And I recall you meeting Tim Leatherman with the kids and pictures you shared. A good family bond.
Also, I have a special one as well[emoji6][emoji106]
This Friday, will be our 44th married + 2 yrs getting to know one another.
I know, Off-Topic! Carry on.
Sent from my iPhone using Tapatalk
Yep, meeting Tim Leatherman was special for all of us, and he did seem to appreciate the fact that my whole family was there and they all shared my tool/brand enthusiasm.
Congrats on finding such a good Misses yourself mate, 46 years together :o.

-
For those of you that have gotten your Free series tools already, can you open the implements with leather work gloves on?
From what I've been reading it sounds like you can actually use everything one handed (which is enough of a selling point for me to buy one) but I was curious if they work with gloves. I may give the P4 a shot at replacing my ST300 for work EDC. Thanks!
-
@Brock O Lee said:
How is the Free’s hand comfort when pressing down in pliers mode, compared to the Charge/Wave/Rebar?The lock release tabs seem like a possible hot spot?
I also see 2 strange little nubs sticking out of the handle in the grip area?

I have mid-large hands and do not feel the little alignment 'nubs'. The lock tabs don't present themselves to my hands when gripping, but some people grip it differently. I'll get some grip pics up in a bit.

@clown said:
For those of you that have gotten your Free series tools already, can you open the implements with leather work gloves on?From what I've been reading it sounds like you can actually use everything one handed (which is enough of a selling point for me to buy one) but I was curious if they work with gloves. I may give the P4 a shot at replacing my ST300 for work EDC. Thanks!
The long tools would be workable OHO with gloves, but the smaller tools may take some technique to use with gloves one-handed.

@Top-Gear-24 said:
I like it, and fit and finish seems to be great but...Do I think it's such a game-changer as Leatherman and others claim it is? No...
The locking mechanism is not as easy as it looks, at least not to me (maybe more fiddling is needed).
I also don't like the fact that they changed the position of the serrated knife compared to the Wave/Surge tools.
The tools on the awl side are very thin, I'm not saying this is going to be a problem, but they do feel a bit flimsy (if they should turn out to be easily damaged, there's always Leatherman famous warranty, and since I purchased it through an official Belgian dealer the Belgian Leatherman importer should help me with that without extra cost this time ::)).
But I don't want to sound too negative, because I've been playing with it all day and it is fun, and I do like it, but not so much that I'm going to put my Wave in the drawer and forget about it. In all honesty, If I could keep only one tool it would probably be my Surge or my Swisstool, not the Wave or the Free P4.
Just my 2 cents at this time, I haven't put it to work really, except for using the scissors and the Phillips two times.
Just to clarify, I don't think any of us think it is a game changer. Not that I know of anyway. I am a bit dense sometimes.
The lock system is really easy for me, but mainly because I got accustomed to it during the PowerAccess challenge. It also uses lock tabs that pull away from the pivot. Give it a week and it should be easier. Hypothetically anyway. :ahhh
I thought the same about the thinner tools, but then realized I have done some crazy smurf with the big driver on the Wave, which is kind of thin. And with the large flat driver/pry tool on the P, I wouldn't need to use the other tools for prying. Time will reveal the outcome of the thin tools though. :)
I'd keep the Surge too, if only one tool could be kept. It is damn near indestructible.
I like the P scissors, but still think the 91mm scissors on the Swisstool(not the silly scissors on the smaller spirit) are better. The P scissors could probably cut thicker material, but the 91mm vic scissors are so much better cutting thin material, and thin material is a majority of my cutting tasks.
-
@LoopCutter said:
Thanks for the picture of the tool pocket riding with clip. Much appreciated.Is the clip removable?
Does it hinder the feel at all when holding either the P2 or P4?
I liked the clip on my Wave as an option to carry, but not when using the tool, the clip just felt in the way to me!
Sent from my iPhone using Tapatalk
It is removable by the looks of it. I actually like it in the position it’s in as it is a place for my thumb to rest in plier mode.
-
@Top-Gear-24 said:
I like it, and fit and finish seems to be great but...Do I think it's such a game-changer as Leatherman and others claim it is? No...
The locking mechanism is not as easy as it looks, at least not to me (maybe more fiddling is needed).
I also don't like the fact that they changed the position of the serrated knife compared to the Wave/Surge tools.
The tools on the awl side are very thin, I'm not saying this is going to be a problem, but they do feel a bit flimsy (if they should turn out to be easily damaged, there's always Leatherman famous warranty, and since I purchased it through an official Belgian dealer the Belgian Leatherman importer should help me with that without extra cost this time ::)).
But I don't want to sound too negative, because I've been playing with it all day and it is fun, and I do like it, but not so much that I'm going to put my Wave in the drawer and forget about it. In all honesty, If I could keep only one tool it would probably be my Surge or my Swisstool, not the Wave or the Free P4.
Just my 2 cents at this time, I haven't put it to work really, except for using the scissors and the Phillips two times.
I hear you on your points. It won’t completely replace my Wave either, but it certainly will be a top tool in my “rotation”. Also I can one hand open my Wave’s pliers, although it’s not as enjoyable as the Free’s. I’m happy having a OHO knife and pliers, so the Wave fits too, and it has the diamond file. So yeah, overall the Wave may edge out the Free in that respect, but the P2 fits me perfectly well for my needs.
-
This is NOT a photo!

I may have gone a bit overboard on how much detail I ended up putting into my 3D model of the Free P4. I did it as sort of skill building exercise.
I photographed each component, and along with calipers modeled each one from scratch in Solid Edge. The render was done in Keyshot.I will use the model to plan a few forthcoming mod ideas, as well as a form fit holster design.
Click for the 4K wallpaper size -
AMAZING modeling/rendering, ZapWizard! :o

It really does the quality of the P2/P4 justice.
-
O.K. I have been enjoying the P4 since I got it a few days ago. But, one thing has made me feel like the P4 was a bit too 'alien'(for lack of a better word). So, I got brave and tightened the screws that mount the pliers head. Just a tad, but the results are great. The tool feels a bit sturdier and the 'click in' of the pliers feels nicer to me. If you haven't dealt with loctite before, and want to tighten/loosen P series pivots, please go read the threads about it on the forum. Nobody likes a stripped out screw/post. :ahhh
-
A butane lighter will do the trick. Just heat the screw for a few seconds and it will turn very easy ;)

-

Good advice, Justin!<u>ADVISORY: THE PLIERS MOUNTS ARE LOCATED NEAR THE ELASTOMER CUSHIONS. USE CAUTION WHILE HEATING.</u>
They are heat resistant(as Aimless pointed out), but too much heat will damage them.I use a soldering iron, but not everyone has one of those. Butane lighters can be had for a few bucks or less. :)
-
I used a regular hairdryer when i hade ti unscrew my LMNs, or hot tap water
-
This is NOT a photo!

Are you a wizard?

-
It's in his name so he must be :ahhh That is one awesome model of the P4

-
I'd like to go over some of my observations again.
The P2/P4 are of the highest possible fit & finish I've seen on an MT.
The OHO on all tools is very nice, and the no-fingernail system works as advertised.
The pliers system is robust and well thought about. While the pliers opening isn't as large as the Wave's, it is still wider than their Swiss competitor's pliers. The cutter blades, which have a good track record, seem well incorporated and function well.
They are extremely satisfying to operate.
The price, at least in the US, is reasonable for the level of QC I see on the P2 and P4 I received.
For the features and effort that is involved with the P2/P4, the tools are well-packages and have a nice profile. The P2 pocket clip, which will be available for sale at some point, works equally as well with the P4. Neither tool is excessively heavy, if your a full-size MT EDC guy.
The drivers are better than anticipated, with the phillips well-formed and flat-drivers nicely ground for extra biting ability.
The sheath, moving on from jokes and not being horizontal carry, is well made and a good design for EDC in my opinion. The grey color fits the tool design nicely.Some criticisms:
On the P4, the saw is somewhat tedious to extract with the thumb, because of the strong tool locks. The SE blade is somewhat difficult to extract, compared to the PE. Hopefully some break-in will help with that. I can still open them with my thumb, but it isn't as easy as opening the PE blade.
When extracting the awl, a little caution is needed, as opening it requires you to push the side with the edge on it. People with really soft skin should be careful not to slide the thumb on it when pushing open.
When the handles slam together in the pliers-open position, via cutting hard wire or snapping the handles together too fast, the drivers can pop out and say peekaboo. It only happened to me a few times, and it seems to have stopped happening with the pivots loosening up. Now, if they say peekaboo, they are pulled back in by the magnets right away. Note: the long blades cannot pop out, because the pliers engagement locks then in place.
The magnets, while a cool idea and super fun, will attract metal particles. The only way to deal with that is to periodically make a little roll of packing tape and dab the metal particles off of the magnet housing.
The pocket clip and lanyard attachment should have been included with both versions from the factory, since both the P2 and P4 work well with either attachment.In short, if you're on the fence about buying one, then I recommend only buying one if you want a tool to play with and get moderate use out of. The Wave and Charge are still better EDC tools overall in a heavy-duty work environment. The P series would serve you well, but it wasn't designed or produces to replace the Wave/Charge. The marketing tactics were unfortunate and set the P series up for a lot of conjectured criticism. I hope Leatherman will not talk crap about their current lineup while promoting a new model in the future. The Free P series isn't for diehard Wave/Charge lovers, and Leatherman didn't respect that fact during promotion.
For moderate users who appreciate a sweet and useful 'sidepiece', the P2/P4 is a good option. Lots of unique features and awesome precision quality construction. IMO, the P4 makes the Vic Spirit look and feel a little cheaper than it used to. As far as fit & finish goes, and barring whatever design concerns you may have, the P2/P4 are outstanding in that regards.
I know I don't need to recommend the P2/P4 to collectors, but it is worth having. If only just for the fact it is unique and represents the different direction that so many people whined about LM not taking. They did a great job on the Free P overall, but there are some quirks like most MTs have. The price is reasonable, as far as US pricing goes(foreign market markup is ridiculous though), considering it is completely made in-house in the US. If you think it is overpriced, then there are many cool NEW unique design options from Ganzo and Roxon these days, for a third the cost. You just don't get the ultra modern design/style, all OHO no-fingernail function, LM brand, US build, or excellent warranty. But, hey, you saved a hundred bucks right?
Gerber and SOG still make pliers based MTs for a lot less money as well. They're just not going to be anything all that different to what you may already have.
Love your Vic Spirit and aren't much of a fan of LM? Maybe save the money for some more SwissTools/SAKs? That is what I'd do in that position. If I weren't big-time into MTs, I'd probably read this thread and move on to something else. I do remember the days when I was happy with a Vic Explorer and Gerber Pinchy. But, nowadays, I am always looking for special, unique, fidget-factor, and hopefully high-quality tools. The Free P2/P4 fits my current requirements for purchase. :)Note: Sorry for any typos, run-on sentences, possible contradictory statements . I stayed up all night watching youtube videos and drinking coffee, while surfing MT.o.

Edit:
Hoping the future pocket clips for sale will be the same as the one that came on the P2. I went ahead and put the P2's clip on the P4. After the Surge challenge, the P4 is gonna get some hip time to see the extent of the possible steel dust issue at work.


-
Well said GLBM

I definitely fall into the category of wanting a fidget favor MT as a moderate (probably even less) user, and I really dig my P2. -
Very informative and helpful insight, particular to those who hasn't had the opportunity of owing or using one yet, like me
. Thank you GLBM for taking the time to share this with us. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
