Let's see some Kershaw's!
-
@Blackbeard said:
Unlike most Kershaw's, Atmos is non assisted, and runs on KVT bearing system. I guess you could call it a poor mans Zero Tolerance(me being the poor man and unless I win the lottery I will never have a ZT
) and is designed by Dimitri Sinkevich and has that bent scale shape of the higher priced knives.Scales are G10 with carbon fiber inlays, blade steel is 8Cr13MoV. This thing is extremely lightweight, 1.76 ounces and at first glance seems too light for what it is
but construction seems sturdy and scales are rigid.<u>Pros:</u>
-Came razor sharp, only tested it on paper but it's as sharp as any of my sharpest knives
-Well Centered, maybe 98-99%
-Blade grind is even on both sides
-No blade play, and good detent
-Deep carry clip, clip is not too tight and has good smooth non g10 area under it, lanyard hole
-Feels very ergonomic, although the bent portion of clip creates a minor "warm" spot
-Good spine, flipper and backspacer gimping.
-Light as a feather
-Inexpensive, $28.50 USD
-Good fidget factor, has only had maybe 1/30 opening misfires so far, when you close the blade enough to get it over the detent ball you can shake the blade closed<u>Cons</u>
-Not too many cons just some observations on the construction that could be better
-Knife needs momentum to fully engage lockbar, if you partially close the knife and then try to slowly open it again, the lockbar will not go to correct postion, this is only occuring if you dont use the flipper and try to do a silent/slow open with no momentum.
-Where the lockbar meets the blade tang, the tang is very short, I didn't get a good pic of this, but there is not a lot of tang real estate that sits on the bar, however there is a scoop on the spine that engages with the blade stop so I dont think this is an issue.
-Bearings feel slightly gritty when closing, hopefully this will improve over time, glad to see they used oil and not that stinky grease other Chinese bearing knifes use
-Some people may not like the softer steel, may need more frequent touching upI will follow up later on after I have carried and used it more, but overall I think it's a winner and deserves the accolades many reviewers have given it.
Thank you for taking the time to write that, Blackbeard! Seems like it may be a good candidate for a budget EDC knife. :)
-
@gerleatherberman said:
Thank you for taking the time to write that, Blackbeard! Seems like it may be a good candidate for a budget EDC knife. :)NP GLBM, yeah I am having a lot of fun with this one. As you can see reviews aren't my day job and I seem to have left out the measurements
I also borrowed the weight from amazon website, but on my crappy non digital postage scale it was closer to 2 ounces.It's probably not gonna replace any hard use/work knives, it's just too light, but it's great for normal edc tasks and just fidgeting with 1 hand(as most of us probably use a knife for 75% of the time)
I haven't had it fail to open except that one time I mentioned, now in about 50-60 tries, so I guess that was user error, it's not as finicky as Kershaws other popular non assisted knife the skyline, which I'm still not sold on due to the misfires and tight clip
I will probably beef up the review after a few weeks of carry and slap it and the pics in the review sub-forum in the future
If you don't own a ball bearing knife this is a good place to try out for little $ outlay, if you want something a bit more robust try Ruike P801 for about same $ or Sanrenmu 910 which is even cheaper.
-
Awesome.


-
@gerleatherberman said:
Awesome.

+1
-
Kershaw sure does some neat knives. They were my go to when I first bought knives. Lots of affordable goodness to be had for not a lot of money.
-
My slightly tuned Skyline gets more pocket time than anything else these days......

-
Nope, my pocket clip stands about 0.5mm proud of the scale and it's never been an issue.......probably my least problematic knife when it comes to climbing out of the pocket by itself when you sit down.....
Lock bar relief was further relieved to accommodate my fat fingers.
Disassembled, cleaned and lubed.......and the big one: secondary bevel increased to what Lansky says is 17 degrees.
Laser 
My current phone is jinxed, my first ever cracked screen, and then I dropped it a second time in 2 weeks......another crack and some structural damage.
Next day I realized one of the chassis screws was ripped out and preventing the cover from clipping back into place......used the Skyline as a screwdriver no worries

I'm slowly falling in love with 14C28N

-
@Gerhard Gerber said:
Nope, my pocket clip stands about 0.5mm proud of the scale and it's never been an issue.......probably my least problematic knife when it comes to climbing out of the pocket by itself when you sit down.....Lock bar relief was further relieved to accommodate my fat fingers.
Disassembled, cleaned and lubed.......and the big one: secondary bevel increased to what Lansky says is 17 degrees.
Laser 
My current phone is jinxed, my first ever cracked screen, and then I dropped it a second time in 2 weeks......another crack and some structural damage.
Next day I realized one of the chassis screws was ripped out and preventing the cover from clipping back into place......used the Skyline as a screwdriver no worries

I'm slowly falling in love with 14C28N

And that's why I always buy professional/industrial model phones even if the performance/features suck and they're bulky. My current one (Sonim Bolt) is supposedly able to be run over by a truck and still be unscathed. Unfortunately, the camera's a joke. Looks like something from a toy. One of those models with a better camera would be the Kyocera DuraXE. I've actually taken some photos for here on it (camera USB/Charging cable bit the dust), and they turned out quite good.
-
Blackwash Leek

-
@cody6268 said:
And that's why I always buy professional/industrial model phones even if the performance/features suck and they're bulky. My current one (Sonim Bolt) is supposedly able to be run over by a truck and still be unscathed. Unfortunately, the camera's a joke. Looks like something from a toy. One of those models with a better camera would be the Kyocera DuraXE. I've actually taken some photos for here on it (camera USB/Charging cable bit the dust), and they turned out quite good.I used to do that.......back when it made any sense. If I could afford iPhones I'd go that route.
You can run an Andriod phone as long as it lasts provided you don't load facebook and especially whatsapp, because this running out of storage space BS is simply planned obsolescence.
I'm sitting with a Samsung and LG phones in perfect working order, just not enough space for apps with the updates installed.
Apart from the phones being very expensive and basically disposable, I've found the contract option at my service provider is the best option, 2 year contract including a phone, I never use all my airtime so the phone is my single cheapest expense.
To give you an example, I'm about a year into the new contract, guesstimate I'd pay 25% the price of a crappy phone to buy out the remainder of my contract, renew and get a new phone.

-
My new favorite; the Concierge

-
Looks like it fits the hand very well. Pointy

-
Updating some of my previous Kershaws thoughts:
<u>Skyline</u>: carrying it a lot, flipping action has gotten much better and I really love the blade shape, exceedingly sharp and cuts amazing, however it is ripping the seam of my pocket badly.with the rough G10 and tight clip.
<u>Atmos</u>: still great, no complaints, highly recommended
A couple of cheapies I picked up in the past 2 months:
<u>Hotwire</u> - A $10 Walmart exclusive, not too bad for the price, has speedsafe assisted opening, on the small side, uneven grind and horrible tiny overtight pocketclip
<u>Cinder</u> - Tiny key chain sized knife was under $7, thumbstud a little hard to open with one hand, has an itsy bitsy liner lock, Love the tiny blade for opening clamshell packages and boxes
-
@Blackbeard said:
Updating some of my previous Kershaws thoughts:<u>Skyline</u>: carrying it a lot, flipping action has gotten much better and I really love the blade shape, exceedingly sharp and cuts amazing, however it is ripping the seam of my pocket badly.with the rough G10 and tight clip.
<u>Atmos</u>: still great, no complaints, highly recommended
A couple of cheapies I picked up in the past 2 months:
<u>Hotwire</u> - A $10 Walmart exclusive, not too bad for the price, has speedsafe assisted opening, on the small side, uneven grind and horrible tiny overtight pocketclip
<u>Cinder</u> - Tiny key chain sized knife was under $7, thumbstud a little hard to open with one hand, has an itsy bitsy liner lock, Love the tiny blade for opening clamshell packages and boxes
Thanks for the info, Blackbeard!

-
@Blackbeard said:
Updating some of my previous Kershaws thoughts:<u>Skyline</u>: carrying it a lot, flipping action has gotten much better and I really love the blade shape, exceedingly sharp and cuts amazing, however it is ripping the seam of my pocket badly.with the rough G10 and tight clip.
More and more this is just the knife I grab first. The G10 on mine is maybe a bit smoother after the mods I did, so fortunately my pockets are fine.
I got mine dirty recently and that affects the action, not a guaranteed flipper if you don't concentrate.
-
-
Nice one, Swinger!

Still need to get a Blur. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
